Search

Over the last few decades, significant research efforts have been devoted to developing new cleaning systems aimed at preserving cultural heritage. One of the main objectives is to selectively remove aged or undesirable coatings from painted surfaces while preventing the cleaning solvent from permeating and engaging with the pictorial layers. In this work, we propose the use of electrospun polyamide 6,6 nonwovens in conjunction with a green solvent (dimethyl carbonate). By adjusting the electrospinning parameters, we produced three distinct nonwovens with varying average fiber diameters, ranging from 0.4 μm to 2 μm. These samples were characterized and tested for their efficacy in removing dammar varnish from painted surfaces. In particular, the cleaning process was monitored using macroscale PL (photoluminescence) imaging in real-time, while post-application examination of the mats was performed through scanning electron microscopy. The solvent evaporation rate from the different nonwovens was evaluated using gravimetric analysis and Proton Transfer Reaction- Time-of-Flight. It was observed that the application of the nonwovens with small or intermediate pore sizes for the removal of the terpenic varnish resulted in the swollen resin being absorbed into the mats, showcasing a peel-off effect. Thus, this protocol eliminates the need for further potentially detrimental removal procedures involving cotton swabs. The experimental data suggests that the peel-off effect relates to the microporosity of the mats, which enhances the capillary rise of the swollen varnish. Furthermore, the application of these systems to historical paintings underwent preliminary validation using a real painting from the 20th century., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: [Chiara Gualandi, Francesca Ramacciotti, Giorgia Sciutto, Maria Letizia Focarete, Rocco Mazzeo, Silvia Prati has patent issued to WO2023006859A1. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper]., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

An innovative green organogel was designed to simultaneously tackle inorganic compounds (i.e., iron corrosion) and organic substances (i.e., acrylic coatings) as undesired materials possibly present on the surface of altered indoor metal artworks. Poly-3-hydroxybutyrate (PHB), ethyl lactate (EL), and deferoxamine B (DFO) were employed in the formulation as thickening agent, organic solvent, and complexing agent, respectively, aiming to propose a sustainable and less harmful chemical cleaning method for metal care. The components were selected because they are bio-sourced, renewable, biodegradable, and non- or low-toxic materials. A multi-modal protocol of analysis was carried out to characterise the newly designed PHB-EL-DFO organogel. The cleaning performance of the novel formulation was assessed on mild steel mock-ups presenting both corrosion and organic coating to be removed. The conducted multi-analytical approach verified that the PHB-EL-DFO gel was able to tackle the two undesired materials simultaneously in an adjustable and easy-to-use way thanks to a modular application., Supplementary Information: The online version contains supplementary material available at 10.1186/s40494-024-01288-0., Competing Interests: Competing interestsThe authors declare that they have no competing interests., (© The Author(s) 2024.)

Osteosarcoma (OS) is the most common primary malignant bone tumor and its etiology has recently been associated with osteogenic differentiation dysfunctions. OS cells keep a capacity for uncontrolled proliferation showing a phenotype similar to undifferentiated osteoprogenitors with abnormal biomineralization. Within this context, both conventional and X-ray synchrotron-based techniques have been exploited to deeply characterize the genesis and evolution of mineral depositions in a human OS cell line (SaOS-2) exposed to an osteogenic cocktail for 4 and 10 days. A partial restoration of the physiological biomineralization, culminating with the formation of hydroxyapatite, was observed at 10 days after treatment together with a mitochondria-driven mechanism for calcium transportation within the cell. Interestingly, during differentiation, mitochondria showed a change in morphology from elongated to rounded, indicating a metabolic reprogramming of OS cells possibly linked to an increase in glycolysis contribution to energy metabolism. These findings add a dowel to the genesis of OS giving new insights on the development of therapeutic strategies able to restore the physiological mineralization in OS cells.

Many of the rarest prehistoric bones found by archaeologists are enormously precious and are considered to be part of our cultural and historical patrimony. Radiocarbon dating is a well-established technique that estimates the ages of bones by analysing the collagen still present. However, this method is destructive, and its use must be limited. In this study, we used imaging technology to quantify the presence of collagen in bone samples in a non-destructive way to select the most suitable samples (or sample regions) to be submitted to radiocarbon dating analysis. Near-infrared spectroscopy (NIR) that was connected to a camera with hyperspectral imaging (HSI) was used along with a chemometric model to create chemical images of the distribution of collagen in ancient bones. This model quantifies the collagen at every pixel and thus provides a chemical mapping of collagen content. Our results will offer significant advances for the study of human evolution as we will be able to minimise the destruction of valuable bone material, which is under the protection and enhancement of European cultural heritage and thus allow us to contextualise the valuable object by providing an accurate calendar age., (© 2023. The Author(s).)

This article tests the suitability of a new method to monitor the degree of substitution of cellulose acetate films, by employing a compact and inexpensive near-infrared miniaturized spectrometer (908.1-1676.2 nm) that can be easily applied in situ. The present study compares the analytical performance of the proposed method against conventional diagnostic strategies based on benchtop micro-attenuated total reflectance Fourier transform Infrared (μATR -FTIR) measurements in the mid-infrared spectral range. The novel calibration function exploits the shifts in the first overtone of the hydroxyl stretching 2νOH band of probe materials and was created using a set of analytical standards with different degrees of substitution. The robustness of the method was assessed by application on a group of sixteen historical cinematographic films. The accurate condition assessment of these films was performed in situ, in a non-invasive manner. The proposed analytical procedure is quick and easy-to-implement, and therefore it constitutes a rapid method to guide conservation strategies regarding film storage and digitalization in cultural institutions, including museums and cinematheques. Potential applications on three-dimensional objects and industrial processes are possible., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

The new challenge in the investigation of cultural heritage is the possibility to obtain stratigraphical information about the distribution of the different organic and inorganic components without sampling. In this paper recently commercialized analytical set-up, which is able to co-register VNIR, SWIR, and XRF spectral data simultaneously, is exploited in combination with an innovative multivariate and multiblock high-throughput data processing for the analysis of multilayered paintings. The instrument allows to obtain elemental and molecular information from superficial to subsurface layers across the investigated area. The chemometric strategy proved to be highly efficient in data reduction and for the extraction and integration of the most useful information coming from the three different spectroscopies, also filling the gap between data acquisition and data understanding through the combination of principal component analysis (PCA), brushing, correlation diagrams and maps (within and between spectral blocks) on the low-level fused. In particular, correlation diagrams and maps provide useful information for the reconstruction of a stratigraphic structure without the need to take any sample, thanks to the effective account for inter-correlation among data (variables), which is able to effectively characterize the possible combinations of components located in the same depth level. The highly innovative technology and the data processing strategy are applied for the multi-level characterization of a complex painting reproduction as an illustrative pilot study., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Continuous welded rail maintenance plays a significant role in ensuring high levels of rail traffic and safety. Temperature variations, excessive alignment defects, decreased fastening system resistance and train braking (always in the same stretches and in the same direction) may result in rail buckling or rail breaks. The current traditional monitoring systems and procedures for continuous welded rail consist of programmed discontinuous diagnostic surveys that require personnel intervention on site. Moreover, these traditional systems often imply destructive and invasive operations on the track that may lead to interruption of railway operations. This paper proposes a Rail Strain Monitoring System (RSMS) that performs a real-time rail strain monitoring and allows rail inspection without personnel on site. Using strain gauges and temperature sensors, placed on the rail in specific measurement points, the proposed Rail Strain Monitoring System performs a multi-parameter check by measuring, at the same time, the temperature, the rail strain and the neutral temperature of the rail. The paper describes the mode of operation of the Rail Strain Monitoring System, the calibration procedure and the results from the field, and highlights the advantages of this system in comparison to other traditional monitoring systems. The safety improvement that can be achieved with the application of the Rail Strain Monitoring System is analysed. In particular, the reliability of the system is evaluated and compared to the human error probability in the traditional manual inspections. Finally, the reduction of derailment risk and related economic damages is estimated. [ABSTRACT FROM AUTHOR]

Spatial uptake patterns of microplastics (MP) by marine species are largely unexplored under field conditions. A novel "biodeposit trap" that measure uptake and egestion of MP by suspension-feeders through the analysis of their biodeposits, was designed and used to estimate the spatial variation of these processes by mussels in field conditions. Traps containing wild or farmed mussels or control empty shells were deployed at three sites characterised by different MP concentrations and water flow conditions. A different MP dimensional composition was observed between MP pools present in biodeposit and control traps, with the latter shifted towards higher dimensional range (0.05-5 mm). Conversely, mussels accumulated small MP (0.02-0.05 mm) into their biodeposits without any significant difference between wild and farmed specimens. MP uptake rates were on average 4-5 times higher at the site where MP contamination was expected to be highest and where water flow conditions were considered moderate., (Copyright © 2022 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Contamination by microplastics (MP) represents a critical environmental challenge with potential consequences at ecosystem, economic and societal levels. As the marine system is the final sink for MP, there is an urgent need to develop methods for the monitoring of synthetic particles in different marine compartments and sample matrices. Extensive evaluations are hindered by time and costs associated with to conventional MP spectroscopic analyses. The potential of near infrared hyperspectral imaging (NIR-HSI) has been recently evaluated. However, NIR-HSI has been poorly studied so far, limitedly to the detection of large particles (>300 μm), and its capability for direct characterization of MP in real marine matrices has not been considered yet. In the present study, a rapid near infrared hyperspectral imaging (NIR-HSI) method, coupled with a customised normalised difference image (NDI) strategy for data processing, is presented and used to detect MP down to 50 μm in environmental matrices. The proposed method is largely automated, without the need for extensive data processing, and enabled a successful identification of different polymers, both in surface water and mussel soft tissue samples, as well as on real field samples with environmentally occurring MP. NIR-HSI is applied directly on filters, without the need for particles pre-sorting or multiple sample purifications, avoiding time consuming procedures, airborne contaminations, particle degradation and loss. Thanks to the time and cost effectiveness, a large-scale implementation of this method would enable to extensively monitor the MP presence in natural environments for assessing the ecological risk related to MP contamination., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Microplastic (MP) contamination is a critical environmental challenge with a strong impact on the ecosystems, economy and potentially for human health. The smaller the MP size, the greater is the environmental risks as well as the analytical difficulties in detecting and characterising the particles. .We propose a rapid near infrared hyperspectral imaging (NIR-HSI) method that enables the chemical identification and characterisation of small MP (down to 80 μm) in aquatic samples, directly on filters, with no pre-sorting step needed. By considerably reducing the procedural steps, the time of analysis and costs our method addresses the urgent need of cost-effective and robust tools for extensive monitoring of MP in natural systems., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

The corrosion products usually found on outdoor bronzes are generated by the interaction between the metal alloy and the atmospheric pollutants. To protect the external surface of bronzes, different organic materials (natural or synthetic) can be applied, creating over time a patina consisting of a complex mixture of inorganic and organic degraded components. The correct chemical characterization of patina constituents is fundamental to define the state of conservation of a metal artwork and address proper restoration actions. In this paper, we evaluated the potentialities of near-infrared (NIR) reflectance microscopy (4000-7500 cm -1 ) as complementary method to mid-infrared (MIR) analyses for the characterization of bronze patinas. Although NIR spectroscopy has been already used in the field of heritage science, its application for the characterization of bronze patinas is almost unexplored. In this paper, several corrosion products usually found on the surface of outdoor bronze sculptures were synthesized, characterized, and submitted to the NIR-MIR total reflection analysis to build up a reference spectral database. We devoted particular attention to the NIR features of copper hydroxychlorides, such as atacamite and paratacamite, which have not been studied in detail up to now. A selection of organic-based formulations, commonly used by restorers to protect the bronze surface against the outdoor aggressive environment, were also considered as references. Successively, NIR-MIR reflectance microscopy was successfully employed for the analysis of patina micro-samples collected from the bronze statues of the Neptune Fountain (sixteenth century) located in Bologna. The obtained results demonstrate the ability of NIR spectroscopy to identify organic and inorganic patina constituents, even in mixtures. In addition, the study can be considered as a proof of concept for the possible future application of the technique for in situ diagnostic campaigns on bronze sculptures.

The paper reports on the development of an analytical method based on the use of a new miniaturised short-wave infrared (SWIR) spectrometer for the analysis of cultural heritage samples. The spectrometer is a prototype characterised by small dimension (45.0 mm in diameter x 47.5 mm in height x 60 g weight), easily handled and transferable out of research laboratories. The prototype enables the acquisition of spectra in the SWIR range of 1200-2200 nm, which is a unique feature for miniaturised spectrometers. The exploitation of this spectral range allows the detection of a high number of combination and overtone bands, which guarantees significant diagnostic power to the instrument. The present study lays a significant foundation to the development of analytical strategies based on miniaturised NIR spectrometers working in the SWIR spectral range for the characterization of complex samples such as cultural heritage specimens. Analytical performances of the new spectrometer were assessed on archaeological bones, cinematographic films and bronze patinas. The selected cases of study present challenging conservation issues not properly addressed, and their analyses usually require to be performed on-site, in places not easily accessible by restorers, archaeologists and/or scientists. The data acquired with the prototype, combined with a multivariate data analysis approach, show the possibility to i) differentiate between the materials used as a support for cinematographic film namely cellulose nitrate (CN), cellulose acetates (CA) and polyethylene terephthalate (PET); ii) sort out archaeological bone fragments according to their collagen content as an initial screening test for bones characterization; iii) differentiate between corrosion products on outdoor bronze sculpture, which is important for assessing the state of conservation of the artwork. The prototype enabled rapid information acquisition to guide restoration strategies, which need to be supported in real time by quick and easy analytical procedures., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Hydrogels and organogels are widely used as cleaning materials, especially when a controlled solvent release is necessary to prevent substrate damage. This situation is often encountered in the personal care and electronic components fields and represents a challenge in restoration, where the removal of a thin layer of aged varnish from a painting may compromise the integrity of the painting itself. There is an urgent need for new and effective cleaning materials capable of controlling and limiting the use of solvents, achieving at the same time high cleaning efficacy. In this paper, new sandwich-like composites that fully address these requirements are developed by using an organogel (poly(3-hydroxybutyrate) + γ-valerolactone) in the core and two external layers of electrospun nonwovens made of continuous submicrometric fibers produced by electrospinning (either poly(vinyl alcohol) or polyamide 6,6). The new composite materials exhibit an extremely efficient cleaning action that results in the complete elimination of the varnish layer with a minimal amount of solvent adsorbed by the painting layer after the treatment. This demonstrates that the combined materials exert a superficial action that is of utmost importance to safeguard the painting. Moreover, we found that the electrospun nonwoven layers act as mechanically reinforcement components, greatly improving the bending resistance of organogels and their handling. The characterization of these innovative cleaning materials allowed us to propose a mechanism to explain their action: electrospun fibers play the leading role by slowing down the diffusion of the solvent and by conferring to the entire composite a microstructured rough superficial morphology, enabling to achieve outstanding cleaning performance.