Search

Objectives: Intraoral scans of multiple implants in the edentulous arch are challenged by the absence of a distinct surface morphology between scan bodies. A scan aid was applied in such situation and evaluated for intraoral scanning accuracy in vivo., Materials and Methods: 87 implants in 22 patients were scanned with scan aid (SA) and without scan aid (NO) using two different intraoral scanners (CS3600 [CS] and TRIOS3 [TR]). Master casts were digitized by a laboratory scanner. Virtual models were superimposed using an inspection software and Linear deviation and precision were measured. Statistical analysis was performed using linear mixed models (α = .05)., Results: Total mean linear deviation within the CS group was 189 μm without scan aid and 135 μm when using the scan aid. The TR group's total mean deviation was 165 μm with and without a scan aid. Significant improvement with scan aid was observed for the CS group (p = .001), and no difference was found in the TR group. 96% of scan bodies were successfully scanned in the TR-SA group compared to 86% for the TR-NO group, 83% for the CS-SA, and 70% for the CS-NO group, respectively., Conclusions: The evaluated scan aid improved linear deviation compared to unsplinted scans for the CS group but not for the TR group. These differences could originate from different scanning technologies used, active triangulation (CS) and confocal microscopy (TR). The scan aid improved the ability to recognize scan bodies successfully with both systems, which could have a favorable clinical impact overall., (© 2023 The Authors. Clinical Oral Implants Research published by John Wiley & Sons Ltd.)

Objectives: Optical impressions of implants in the edentulous arch are challenged by the absence of distinct surface morphology between multiple implant scan bodies. The purpose of this in vitro study was to evaluate a newly developed scan aid in various designs and colors to improve the accuracy of multi-implant scans., Materials and Methods: A universal scan aid in three different designs (circular, square, irregular) and three different materials (colors: beige, gray, white) was applied to the implant scan bodies of a master model of six implants in an edentulous maxilla. Ten scans using an intra-oral scanner of each scan aid were acquired. Reference scanning was performed using a desktop optical scanner. Alignment of scans was performed at the first scan body in a three-dimensional modeling and inspection software and deviations for trueness and precision were calculated using the signed nearest-neighbor method and then statistically analyzed (α = .05)., Results: Overall, the beige irregular scan aid had the highest trueness and showed significant differences compared to unsplinted scans. The precision showed more heterogenous results and decreased when using the scan aid. Ease of use was observed with the irregular gray scan aid due to its increased elongation at break., Conclusions: The evaluated scan aid led to improved trueness when compared to unsplinted scans. Even though the irregular design in beige color showed highest trueness, the poor fracture strength of the tested material requires further improvement., (© 2022 The Authors. Clinical Oral Implants Research published by John Wiley & Sons Ltd.)

Objectives: The aim of this clinical study was to compare the accuracy of intraoral scan system (IOS) with prefabricated aids and stereophotogrammetry (SPG) compared with open tray implant impression (OI) for complete-arch implant-supported fixed dental prostheses (CIFDP)., Materials and Methods: Patients needing CIFDP were enrolled in this study. OI, reference standard, IOS with prefabricated aids, and SPG were performed for each patient. Distance and angle deviations between all pairs of abutment analogs, root mean square (RMS) errors between the aligned test and reference model, and chairside time were measured. The effect of inter-abutment distance, jaw (maxilla or mandible), number of implants, and arch length on deviations was analyzed. The mixed effect model was applied to analyze deviations and RMS errors., Results: Fifteen consecutive individuals (6 females and 9 males, 47-77 years old) with 22 arches (9 upper and 13 lower jaws) and 115 implants were included. There was no significant difference in distance deviation comparing SPG and IOS with OI (p > .05). IOS showed a significantly greater angle deviation and RMS errors than SPG (median 0.40° vs. 0.31°, 69 μm vs. 45 μm, p < .01). The inter-abutment distance was negatively correlated with the accuracy of SPG and IOS (p < .05). The chairside time for IOS, SPG, and OI was 10.49 ± 3.50, 14.71 ± 2.86, and 20.20 ± 3.01 min, respectively (p < .01)., Conclusions: The accuracy of SPG and IOS with prefabricated aids was comparable. IOS was the most efficient workflow., (© 2023 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Objective: This study investigated how the number of images collected for digital measurements in dentistry affects accuracy compared with traditional methods. Methods: A Frasaco maxillary model was scanned using a SHINING 3D AutoScan-DS-MIX dental 3D scanner to create an STL file. The maxilla was molded 10 times using polyvinyl siloxane (Zhermack Elite HD+) to produce plaster models, which were scanned with the same reference scanner to generate 10 STL files. The Frasaco model was scanned 10 times, capturing images in intervals of 800–1000, 1000–1200, and 1200–1500 using a 3Shape TRIOS 3 intraoral scanner, creating additional STL files. These were analyzed with reverse engineering software. Results: The most accurate measurements were obtained using 1200–1500 images. Conventional impression techniques performed significantly worse. There was a significant difference between the groups Digital 1200–1500 and Plaster (p < 0.001) and between Digital 800–1000 and Plaster (p = 0.007). No significant difference was found when the digital groups were compared among themselves. There was also no significant difference between the Plaster and Digital 1000–1200 groups. To compare precision values that were normally distributed across three or more methods, a one-way ANOVA was used. Trueness values that were not normally distributed with three or more methods were compared employing the Kruskal–Wallis test. Conclusions: Different image counts affect digital measurement accuracy. The most accurate measurements were obtained when collecting 1200–1500 images. Conventional impression techniques were shown to perform significantly worse than digital impression. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this systematic review was to explore and identify the factors that influence the accuracy of intraoral scanning in implant dentistry, with a specific focus on scan bodies (ISBs). Methods: Following the PRISMA 2020 guidelines, this study conducted a thorough electronic search across MedLine, PubMed, and Scopus to identify relevant studies. Articles were screened based on titles, abstracts, and full texts for relevance. The Robins I tool assessed the risk of bias in various study types. Data extraction occurred based on predetermined parameters for studying specimens and assessing outcomes. Results: 16 studies met the specified criteria and were consequently included in the systematic review. Due to variations in variables and methods across the selected studies, statistical comparison of results was not feasible. Therefore, a descriptive review approach was chosen, acknowledging the substantial heterogeneity in the reviewed literature. Conclusions: The precision of virtual scan results is contingent upon diverse characteristics of ISBs and implants. These factors encompass their placement within the dental arch, structural design, shape, material composition, color, and the manufacturing system, all of which contribute to scan accuracy. Additionally, considerations such as the intraoral scanner (IOS) type, scanning technique, use of scan aids, inter-implant distance, scan span, and the number of implants warrant evaluation. In the context of capturing implant positions, intraoral scanning with ISBs demonstrates comparable accuracy to traditional impression methods, particularly in single and short-span scenarios. However, the existing data lacks sufficient information on in vivo applications to formulate clinical recommendations. [ABSTRACT FROM AUTHOR]

Objective: Complete arch implant rehabilitation necessitates meticulous treatment planning and high‐level collaboration between surgical and prosthetic dental teams. Emerging virtual technologies hold considerable promise in streamlining this process. The aim of this article is to extend recommendations to clinicians venturing into the virtual patient‐assisted esthetic implant rehabilitation workflow. Overview: This article summarizes recommendations for virtual patient‐assisted esthetic implant rehabilitation in the following five aspects: three‐dimensional data handling and superimposition, occlusion and virtual articulator integration in creating virtual patients, streamlined face‐ and prosthetic‐driven surgical planning, reuse of presurgical data ("Copy & Paste"), and final impression for passive fitting of final restoration. To illustrate these principles, a case with complete‐mouth implant rehabilitation completed within six visits using this virtual patient workflow is presented. Conclusion: The virtual patient workflow serves as an invaluable tool to perform treatment planning, enhance efficiency, and ensure predictable outcomes in esthetic complete arch implant rehabilitation. Clinical Significance: Virtual workflows are increasingly prevalent in esthetic implant rehabilitation. Nevertheless, these workflows necessitate a distinct set of knowledge and tools divergent from conventional dentistry practices. This article offers guidelines and recommendations for dental clinicians who are new to this field. [ABSTRACT FROM AUTHOR]

Copyright of Selcuk Dental Journal is the property of Selcuk Dental Journal and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Purpose: To determine the influence of using 3D-printed scan aids in varying colors on the trueness of digital scans., Materials and Methods: A master cast with five multi-unit analogues was scanned. The acquired dataset was exported to standard tessellation language (STL) file format to serve as the reference STL. 3D printing of the prototype in five distinct colors (beige [SA BEIGE ], grey [SA GREY ], white [SA WHITE ], red [SA RED ], and blue [SA BLUE ]) of polylactic acid filament was executed. The experimental STLs of each color group were aligned to the reference STL. RMS values were solely computed for the scan bodies. Based on the centers of the created best-fit and offset planes, scan bodies were converted into virtual cylinders. Cartesian coordinates of each cylinder were acquired. Subsequently, angular (AD) and linear deviation (LD) values were calculated. LD was further examined separately along the x, y, and z axes. Data were statistically analyzed., Results: According to the results of one-way ANOVAs, significant differences were detected among color groups on AD, LD, RMS estimate error, ∆x, ∆y, and ∆z data. The lowest AD and LD values were exhibited by the SA GREY group in all implant sites. The SA GREY group was followed by the SA BEIGE , SA WHITE , SA RED , and SA BLUE groups., Conclusions: The SA GREY outperformed the other groups in terms of trueness. Although the LD values of all color groups were below the threshold value (<100 µm), only the AD values of the SA GREY , SA BEIGE , and SA WHITE groups were clinically acceptable (<0.5°)., (© 2024 The Author(s). Journal of Prosthodontics published by Wiley Periodicals LLC on behalf of American College of Prosthodontists.)

Objective: To assess a newly developed intraoral scan protocol in enhancing the accuracy of complete-arch implant impressions., Materials and Methods: Four impression approaches were applied to the same maxillary edentulous model with 6 implants: (1) intraoral scan (IOS), (2) intraoral scan with scan aid (IOS-SA), (3) calibrated intraoral scan protocol (CISP), and (4) conventional splinted open-tray impression (CONV). Each approach was repeated 10 times, and a direct scan of the model with a desktop scanner was used as a reference model. The alignment of scans and the reference model was conducted by two methods: (a) aligning all scan bodies to evaluate the overall fit, and (b) aligning the first and second scan bodies to simulate the Sheffield fit test for passive fitting of multiple implant-supported prostheses. Linear deviations from the reference model (trueness) and within each group (precision) were analyzed using Python scripts., Results: When aligned by all scan bodies, the CISP group exhibited comparable mean trueness (38.33 μm) and precision (45.97 μm) to the CONV group (44.30 and 47.92 μm respectively), both of which significantly outperformed the IOS group (86.82 and 83.17 μm, respectively). Furthermore, in the virtual Sheffield fit test, the CISP group achieved the highest levels of mean trueness at the end span (121.7 μm), making a linear deviation reduction of 36.7%, 60%, and 41.4% when compared to the CONV, the IOS, and the IOS-SA groups, respectively. Moreover, the CISP group (104.3 μm) displayed a remarkable 65, 182, and 86 μm advantage in precision over the CONV, IOS, and IOS-SA groups, respectively., Conclusion: CISP demonstrated comparable accuracy to the gold standard, the conventional splinted open-tray impression. Furthermore, it excelled in the virtual passive fitting test., (© 2024 The Authors. Clinical Implant Dentistry and Related Research published by Wiley Periodicals LLC.)

Objectives: This study aimed to develop a structured light scanning system with a planar mirror to enhance the digital full-arch implant impression accuracy and to compare it with photogrammetry and intraoral scanner methods., Materials and Methods: An edentulous maxillary stone cast with six scan bodies was scanned as the reference model using a laboratory scanner. Three scanning modalities were compared (n = 10): (1) self-developed structured light scanning with a mirror (SSLS); (2) intraoral scanner (IOS); and (3) photogrammetry system (PG). The scanners were stopped for 1 min after each scan. Six scan bodies were analysed within each scan model. Linear deviations between the scan bodies (1-2, 1-3, 1-4, 1-5, and 1-6) and 3D mucosal deviations were established. The overall deviation was calculated as the mean of all linear deviations. "Trueness" represented the discrepancy between the test and reference files, while "precision" denoted the consistency among the test files. Kruskal-Wallis and Mann-Whitney U tests were used for statistical analyses., Results: Significant overall linear discrepancies were noted among the SSLS, PG, and IOS groups (p < .001). SSLS showed the best overall trueness and precision (6.6, 5.7 μm), followed by PG (58.4, 6.8 μm) and IOS (214.6, 329.1 μm). For the 3D mucosal deviation, the trueness (p < .001) and precision (p < .001) of the SSLS group were significantly better than those of the IOS group., Conclusions: The SSLS exhibited higher accuracy in determining the implant positions than the PG and IOS. Additionally, it demonstrated better accuracy in capturing the mucosa than IOS., (© 2023 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Objective: This in-vitro study assessed the influence of two intraoral scanning (IOS) protocols on the accuracy (trueness and precision) of digital scans performed in edentulous arches., Methods: Twenty-two abutment-level master casts of edentulous arches with at least four implants were scanned repeatedly five times, each with two different scanning protocols. Protocol A (IOS-A) consisted of scanning the edentulous arch before inserting the implant scan bodies, followed by their insertion and its subsequent digital acquisition. Protocol B (IOS-B) consisted of scanning the edentulous arch with the scan bodies inserted from the outset. A reference scan from each edentulous cast was obtained using a laboratory scanner. Trueness and precision were calculated using the spatial fit analysis, cross-arch distance, and virtual Sheffield test. Statistical analysis was performed using generalized estimating equations (GEEs). Statistical significance was set at α = .05., Results: In the spatial fit test, the precision of average 3D distances was 45 μm (±23 μm) with protocol IOS-A and 25 μm (±10 μm) for IOS-B (p < .001), and the trueness of average 3D distances was 44 μm (±24 μm) with protocol IOS-A and 24 μm (±7 μm) for IOS-B (p < .001). Cross-arch distance precision was 59 μm (±53 μm) for IOS-A and 41 μm (±43 μm) for IOS-B (p = .0035), and trueness was 64 μm (±47 μm) for IOS-A and 50 μm (±40 μm) for IOS-B (p = .0021). Virtual Sheffield precision was 286 μm (±198 μm) for IOS-A and 146 μm (±92 μm) for IOS-B (p < .001), and trueness was 228 μm (±171 μm) for IOS-A and 139 μm (±92 μm) for IOS-B (p < .001)., Conclusions: The IOS-B protocol demonstrated significantly superior accuracy. Placement of scan bodies before scanning the edentulous arch is recommended to improve the accuracy of complete-arch intraoral scanning., (© 2024 The Authors. Clinical Oral Implants Research published by John Wiley & Sons Ltd.)

Commercial available filaments made from poly(lactic) acid (PLA) are selected for potential use in 3D printed parts by fused deposition modeling. Virgin materials (PLA Eum, Z‐PLA Pro), but also recycled matrices (PLA 2Life, PLA Eubio), and one filled with wood fibers (PLA Woodfir) have been considered. Then, a lab‐made filament (PLA Nature) is realized by extruding PLA pellets. Thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and rheological measurements are used to determine initial degradation temperature, glass transition, melting temperature, and complex viscosity as a function of time and material pre‐drying. A preliminary investigation of thermal properties enables the materials' processing window to be validated in order to prevent the deterioration during the process. PLA Nature and PLA Woodfir melt around 170°C, whereas all of the other biopolymers show a lower melting point (around 150°C). The temperature at which thermal degradation began is always greater than 260°C. However, good stability of rheological parameters over time at 210°C is not confirmed for all bio‐filaments. In particular, for Z‐PLA Pro and PLA Eubio, a significant reduction of complex viscosity is verified after a few seconds of testing. Drying samples have been shown to improve the long‐term stability of complex viscosity. [ABSTRACT FROM AUTHOR]

Copyright of Implantologie is the property of Quintessenz Verlags GmbH and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

A compound sharp-crested weir is often used to measure a wide range of flows with appropriate accuracy in open channels. In this study, experiments were performed to investigate the hydraulic flow through a compound weir of circular-rectangular with changes in hydraulic and geometric parameters in free and submerged flow conditions. The characteristics of the weirs include rectangular spans width of 39 cm, a circular radius of 5, 7.5, and 12.5 cm, and heights of 10 and 15 cm. The results showed that by increasing the radius and height of the Weir, upstream water depth increases around 28.4%. At a constant h/p, the discharge coefficient increases with the increasing radius of the circular arc. Also, in the submerged conditions, the discharge coefficient is less (around 40%) than in the free flow condition, which is due to the resistance of the depth of the created stream against the passage of the flow. [ABSTRACT FROM AUTHOR]

Vinegar flies (Diptera: Drosophilidae) are well known to be associated with yeasts, which provide important nutrients and emit attractive semiochemicals. Drosophila suzukii (Matsumura) has become a major pest of berries and cherries around the world, requiring intensive management to maintain fruit quality. Although insecticides remain a dominant control approach, disruption of fly–yeast–host interactions remains a promising avenue for reducing the economic impact of this pest. We conducted field and laboratory experiments to explore whether a crop sterilant (peroxyacetic acid and hydrogen peroxide) developed for disease control can affect D. suzukii. In 2 yr of field tests in highbush blueberries, we found significantly lower infestation by D. suzukii in plots treated with the crop sterilant, both alone and in a rotation program with zeta-cypermethrin. When shoots from treated plots were tested in no-choice bioassays, crop sterilant treatments did not affect adult mortality or oviposition, but they reduced infestation. To explore the mechanisms in the laboratory, we found that the crop sterilant did not affect adult mortality, nor oviposition on treated fruit under no-choice settings, but adult flies settled and oviposited less on treated fruit in choice settings. When the crop sterilant was applied to colonies of Hanseniaspora uvarum (Niehaus) (Saccharomycetales: Saccharomycodaceae) and Issatchenkia terricola (Van der Walt) (Saccharomycetales: Saccharomycetacea) yeasts that are attractive and provide nutrition to D. suzukii , there was a dose-dependent inhibition of their growth. We highlight the potential for microbial management as a component of integrated pest management programs and prioritize research needs to incorporate this approach into control programs. [ABSTRACT FROM AUTHOR]

Copyright of Canadian Journal of Civil Engineering is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The invasive vinegar fly, Drosophila suzukii Matsumura, has emerged as one of the most serious arthropod pests of primocane red raspberries (Rubus ideaus L.) in the United States. In raspberries, D. suzukii encounter a diverse community of microbes, including fruit rot pathogens such as Botrytis cinerea Pers and Cladosporium cladosporioides de Vries. In this study, our primary objectives were to evaluate D. suzukii– fungal associations and determine D. suzukii 's influence on fungal communities in raspberry fruit. Through culture-based surveys of larval gut microbes, we isolated several yeast fungi (primarily Hanseniaspora spp.), as well as Cladosporium, Botrytis, and several other non-yeast fungi from larval frass, suggesting that D. suzukii larvae encounter and feed on these fungi. Subsequent field surveys confirmed that D. suzukii larvae occurred in berries affected by Botrytis fruit rot and Cladosporium fruit rot. Under laboratory conditions, D. suzukii may facilitate C. cladosporioides infections, likely through the introduction of epiphytic propagules on the fruit surface. We could not detect impacts on B. cinerea infections or establish a clear vectoring relationship for either fruit rot. These studies provide evidence for an association between D. suzukii and fungal fruit rot pathogens. Understanding interactions between raspberry fruit, D. suzukii, and fungal microbes—especially whether D. suzukii facilitates the development of fruit rots or conversely, if fruit rots influence D. suzukii infestation patterns—may improve pest and pathogen management programs. [ABSTRACT FROM AUTHOR]

ABSTRACT Thermoplastic polyethersulfone (PES) modified multifunctional tetraglycidyl-4,4′-diaminodiphenylmethane (TGDDM) and triglycidyl para-aminophenol (TGAP) epoxy prepolymers cured with 4,4′-diaminodiphenylsulfone (44DDS) were prepared using a continuous reactor method and their reaction-induced phase separated morphologies and mechanical properties were measured and correlated with chemical compositions. 1H nuclear magnetic resonance (1H NMR) and near-infrared spectroscopy (NIR) were used to quantify the chemical network formation. Atomic force microscopy (AFM) with nanomechanical mapping was employed to resolve the nanoscale phase-separated morphologies. The extent of phase separation in cured networks and resultant domain sizes were determined to be controllable depending upon the multifunctional epoxy compositions. The results obtained from mechanical studies further indicated that tensile modulus was not largely affected by multifunctional epoxy compositions while fracture toughness increased with increase of TGAP content. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017, 134, 44775. [ABSTRACT FROM AUTHOR]

Many lakes in Southeastern Wisconsin (the metropolitan-Milwaukee area) are gradually becoming increasingly 'salty'. While these waterbodies would not be considered presently to be saline lakes, there has been a rapid increase in the chloride concentrations in most of these lakes over the last 30 years, with the lakes increasing from a mean chloride concentration of about 19 mg/L to over 100 mg/L in some cases. While ecological impacts can be expected when chloride values exceed 250 mg/L, the rate of increase presents a basis for concern, especially since the underlying geology of the region is based on limestone/dolomite which is deficient in chlorides. Thus, the origin of the chlorides is anthropogenic: human and industrial wastewaters (treatment of which has effected improvements in trophic status but has not affected other water-borne contaminants) and winter de-icing practices based upon large quantities of sodium chloride are major contributors to the increasing concentrations of chloride in the region's waterways. Without taking remedial measures, the rate of salinization is expected to continue to increase, resulting, ultimately, in the alteration of the freshwater systems in the region. [ABSTRACT FROM AUTHOR]