Search

Controlling the self-assembly of nanoparticle building blocks into macroscale soft matter structures is an open question and of fundamental importance to fields as diverse as nanomedicine and next-generation energy storage. Within the vast library of nanoparticles, the fullerenes-a family of quasi-spherical carbon allotropes-are not explored beyond the most common, C 60 . Herein, a facile one-pot method is demonstrated for functionalizing fullerenes of different sizes (C 60 , C 70 , C 84, and C 90-92 ), yielding derivatives that self-assemble in aqueous solution into supramolecular hydrogels with distinct hierarchical structures. It is shown that the mechanical properties of these resultant structures vary drastically depending on the starting material. This work opens new avenues in the search for control of macroscale soft matter structures through tuning of nanoscale building blocks., (© 2024 The Author(s). Small published by Wiley‐VCH GmbH.)

In this work, we implement a dual frequency (24 kHz and 1174 kHz) ultrasonic assisted liquid phase exfoliation (ULPE) technique in deionized water (DIW) and other eco-friendly solvents, to produce a variety of high-quality few-layer graphene (FLG) solutions under controlled ultrasonication conditions. The resulting FLG dispersions of variable sizes (∼0.2-1.5 μm 2 ) confirmed by characterisation techniques comprising UV-Vis spectroscopy, Raman spectroscopy and high-resolution transmission electron microscopy (HR-TEM). For the first time we demonstrate that high yield of FLG flakes with minimal defects, stable for 6 + months in a solution (stability ∼ 70 %), can be obtained in less than 1-hour of treatment in either water/ethanol (DIW:EtOH) or water/isopropyl alcohol (DIW:IPA) eco-friendly mixtures. We also scrutinized the underlying mechanisms of cavitation using high-speed imaging synchronized with acoustic pressure measurements. The addition of ethanol or IPA to deionized water is proposed to play a central role in exfoliation as it regulates the extend of the cavitation zone, the intensity of the ultrasonic field and, thus, the cavitation effectiveness. Our study revealed that lateral sizes of the obtained FLG depend on the choice of exfoliating media and the diameter of a sonotrode used. This variability offers flexibility in producing FLG of different sizes, applicable in a wide spectrum of size-specific applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

This paper follows our earlier work where a strong high frequency pressure peak has been observed as a consequence of the formation of shock waves due to the collapse of cavitation bubbles in water, excited by an ultrasonic source at 24 kHz. We study here the effects of liquid physical properties on the shock wave characteristics by replacing water as the medium successively with ethanol, glycerol and finally a 1:1 ethanol-water solution. The pressure frequency spectra obtained in our experiments (from more than 1.5 million cavitation collapsing events) show that the expected prominent shockwave pressure peak was barely detected for ethanol and glycerol, particularly at low input powers, but was consistently observed for the 1:1 ethanol-water solution as well as in water, with a slight shift in peak frequency for the solution. We also report two distinct features of shock waves in raising the frequency peak at MHz (inherent) and contributing to the raising of sub-harmonics (periodic). Empirically constructed acoustic pressure maps revealed significantly higher overall pressure amplitudes for the ethanol-water solution than for other liquids. Furthermore, a qualitative analysis revealed that mist-like patterns are developed in ethanol-water solution leading to higher pressures., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Author(s). Published by Elsevier B.V. All rights reserved.)

Achieving a sustainable production of pristine high-quality graphene and other layered materials at a low cost is one of the bottlenecks that needs to be overcome for reaching 2D material applications at a large scale. Liquid phase exfoliation in conjunction with N -methyl-2-pyrrolidone (NMP) is recognized as the most efficient method for both the exfoliation and dispersion of graphene. Unfortunately, NMP is neither sustainable nor suitable for up-scaling production due to its adverse impact on the environment. Here, we show the real potential of green solvents by revealing the independent contributions of their exfoliation efficiency and graphene dispersibility to the graphene yield. By experimentally separating these two factors, we demonstrate that the exfoliation efficiency of a given solvent is independent of its dispersibility. Our studies revealed that isopropanol can be used to exfoliate graphite as efficiently as NMP. Our finding is corroborated by the matching ratio between the polar and dispersive energies of graphite and that of the solvent surface tension. This direct evidence of exfoliation efficiency and dispersibility of solvents paves the way to developing a deeper understanding of the real potential of sustainable graphene manufacturing at a large scale., Competing Interests: The authors declare no competing financial interest., (© 2022 The Authors. Published by American Chemical Society.)

Graphene dispersions in water are highly desirable for a range of applications such as biomedicines, separation membranes, coatings, inkjet printing and more. Recent novel research has been focussed on developing a green approach for scalable production of graphene. However, one important parameter, which is often neglected is the bulk temperature of the processing liquid. This paper follows our earlier work where optimal sono-exfoliation parameters of graphite in aqueous solutions were determined based on the measured acoustic pressure fields at various temperatures and input powers. Here, we take the next step forward and demonstrate using systematic characterisation techniques and acoustic pressure measurements that sonication-assisted liquid phase exfoliation (LPE) of graphite powder can indeed produce high quality few layer graphene flakes in pure water at a specific temperature, i.e. 40 °C, and at an optimised input generator power of 50%, within 2-h of processing. UV-vis analysis also revealed that the exfoliation, stability and uniformity of dispersions were improved with increasing temperature. We further confirmed the successful exfoliation of graphene sheets with minimal level of defects in the optimized sample with the help of Raman microscopy and transmission electron microscopy. This study demonstrated that understanding and controlling processing temperature is one of the key parameters for graphene exfoliation in water which offers a potential pathway for its large-scale production., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 The Authors. Published by Elsevier B.V. All rights reserved.)

For the purpose of creating single-molecule junctions, which can convert a temperature difference Δ T into a voltage Δ V via the Seebeck effect, it is of interest to screen molecules for their potential to deliver high values of the Seebeck coefficient S = -Δ V /Δ T . Here we demonstrate that insight into molecular-scale thermoelectricity can be obtained by examining the widths and extreme values of Seebeck histograms. Using a combination of experimental scanning-tunnelling-microscopy-based transport measurements and density-functional-theory-based transport calculations, we study the electrical conductance and Seebeck coefficient of three endohedral metallofullerenes (EMFs) Sc 3 N@C 80 , Sc 3 C 2 @C 80 , and Er 3 N@C 80 , which based on their structures, are selected to exhibit different degrees of charge inhomogeneity and geometrical disorder within a junction. We demonstrate that standard deviations in the Seebeck coefficient σ S of EMF-based junctions are correlated with the geometric standard deviation σ and the charge inhomogeneity σ q . We benchmark these molecules against C 60 and demonstrate that both σ q , σ S are the largest for Sc 3 C 2 @C 80 , both are the smallest for C 60 and for the other EMFs, they follow the order Sc 3 C 2 @C 80 > Sc 3 N@C 80 > Er 3 N@C 80 > C 60 . A large value of σ S is a sign that a molecule can exhibit a wide range of Seebeck coefficients, which means that if orientations corresponding to high values can be selected and controlled, then the molecule has the potential to exhibit high-performance thermoelectricity. For the EMFs studied here, large values of σ S are associated with distributions of Seebeck coefficients containing both positive and negative signs, which reveals that all these EMFs are bi-thermoelectric materials.

Endohedral nitrogen fullerenes have been proposed as building blocks for quantum information processing due to their long spin coherence time. However, addressability of the individual electron spin levels in such a multiplet system of 4 S 3/2 has never been achieved because of the molecular isotropy and transition degeneracy among the Zeeman levels. Herein, by molecular engineering, we lifted the degeneracy by zero-field splitting effects and made the multiple transitions addressable by a liquid-crystal-assisted method. The endohedral nitrogen fullerene derivatives with rigid addends of spiro structure and large aspect ratios of regioselective bis-addition improve the ordering of the spin ensemble. These samples empower endohedral-fullerene-based qudits, in which the transitions between the 4 electron spin levels were respectively addressed and coherently manipulated. The quantum geometric phase manipulation, which has long been proposed for the advantages in error tolerance and gating speed, was implemented in a pure electron spin system using molecules for the first time., (© 2021 Wiley-VCH GmbH.)

We present electrical transport and Raman measurements on individual single-wall carbon nanotubes filled with the paramagnetic metallofullerene Sc@C82. We find nearly all devices to be metallic p-type conductors, which we tentatively attribute to bandstructure modification of the nanotubes by the encapsulated Sc@C82 molecules. At low temperatures the peapod devices behave as quantum dots and transport is shown to be quantum coherent over distances of at least ∼100 nm. Kondo features are observed at the lowest measurement temperatures of 50 mK. Our results are of fundamental interest because of the long spin coherence times of the unpaired electrons on the Sc@C82 molecules and the possibility this offers for studying one-dimensional spin chains in carbon nanotubes. [ABSTRACT FROM AUTHOR]

The electric transport properties of the individual single-wall carbon nanotubes filled with the paramagnetic metallofullerene ] are studied. Low-temperature measurements have shown that transport in the nanotube peapods is quantum coherent over distances of at least 100 nm and nearly all devices have behaved as metallic p-type conductors.

Lead Iodide (PbI 2 ) is a large bandgap 2D layered material that has potential for semiconductor applications. However, atomic level study of PbI 2 monolayer has been limited due to challenges in obtaining thin crystals. Here, we use liquid exfoliation to produce monolayer PbI 2 nanodisks (30-40 nm in diameter and > 99% monolayer purity) and deposit them onto suspended graphene supports to enable atomic structure study of PbI 2 . Strong epitaxial alignment of PbI 2 monolayers with the underlying graphene lattice occurs, leading to a phase shift from the 1 T to 1 H structure to increase the level of commensuration in the two lattice spacings. The fundamental point vacancy and nanopore structures in PbI 2 monolayers are directly imaged, showing rapid vacancy migration and self-healing. These results provide a detailed insight into the atomic structure of monolayer PbI 2 , and the impact of the strong van der Waals interaction with graphene, which has importance for future applications in optoelectronics.

The powerful electron accepting ability of fullerenes makes them ubiquitous components in biomimetic donor-acceptor systems that model the intermolecular electron transfer processes of Nature's photosynthetic center. Exploiting perylene diimides (PDIs) as components in cyclic host systems for the noncovalent recognition of fullerenes is unprecedented, in part because archetypal PDIs are also electron deficient, making dyad assembly formation electronically unfavorable. To address this, we report the strategic design and synthesis of a novel large, macrocyclic receptor composed of two covalently strapped electron-rich bis-pyrrolidine PDI panels, nicknamed the "Green Box" due to its color. Through the principle of electronic complementarity, the Green Box exhibits strong recognition of pristine fullerenes (C 60/70 ), with the noncovalent ground and excited state interactions that occur upon fullerene guest encapsulation characterized by a range of techniques including electronic absorption, fluorescence emission, NMR and time-resolved EPR spectroscopies, cyclic voltammetry, mass spectrometry, and DFT calculations. While relatively low polarity solvents result in partial charge transfer in the host donor-guest acceptor complex, increasing the polarity of the solvent medium facilitates rare, thermally allowed full electron transfer from the Green Box to fullerene in the ground state. The ensuing charge separated radical ion paired complex is spectroscopically characterized, with thermodynamic reversibility and kinetic stability also demonstrated. Importantly, the Green Box represents a seminal type of C 60/70 host where electron-rich PDI motifs are utilized as recognition motifs for fullerenes, facilitating novel intermolecular, solvent tunable ground state electronic communication with these guests. The ability to switch between extremes of the charge transfer energy continuum is without precedent in synthetic fullerene-based dyads.