Search

Finite element method applications are a common approach to simulate a handful of phenomena but can take a lot of computing power, causing elevated waiting time to produce precise results. The radiofrequency ablation finite element method is an application to simulate the medical procedure of radiofrequency ablation, a minimally invasive liver cancer treatment. The application runs sequentially and can take up to 20 hours of execution to generate 15 minutes of simulation results. Most of this time arises from the need to solve a sparse system of linear equations. In this work, we accelerate this application by using three sparse solvers packages (MAGMA cuSOLVER, and QRMumps), including direct and iterative methods over different multicore and GPU architectures. We conducted a numerical result analysis to access the solution quality provided by the distinct solvers and their configurations, proposing the use of the peak signal-to-noise ratio metric. We were able to reduce the application execution time up to 40 times compared to the original sequential version while keeping a similar numerical quality for the results., Comment: 8 pages, 11 figures

The relation between crystal symmetries, electron correlations, and electronic structure steers the formation of a large array of unconventional phases of matter, including magneto-electric loop currents and chiral magnetism. Detection of such hidden orders is a major goal in condensed matter physics. However, to date, nonstandard forms of magnetism with chiral electronic ordering have been experimentally elusive. Here, we develop a theory for symmetry-broken chiral ground states and propose a methodology based on circularly polarized spin-selective angular-resolved photoelectron spectroscopy to probe them. We exploit the archetypal quantum material Sr2RuO4 and reveal spectroscopic signatures which, even though subtle, may be reconciled with the formation of spin-orbital chiral currents at the material surface. As we shed light on these chiral regimes, our findings pave the way for a deeper understanding of ordering phenomena and unconventional magnetism.

The control of Mott phase is intertwined with the spatial reorganization of the electronic states. Out-of-equilibrium driving forces typically lead to electronic patterns that are absent at equilibrium, whose nature is however often elusive. Here, we unveil a nanoscale pattern formation in the Ca$_2$RuO$_4$ Mott insulator. We demonstrate how an applied electric field spatially reconstructs the insulating phase that, uniquely after switching off the electric field, exhibits nanoscale stripe domains. The stripe pattern has regions with inequivalent octahedral distortions that we directly observe through high-resolution scanning transmission electron microscopy. The nanotexture depends on the orientation of the electric field, it is non-volatile and rewritable. We theoretically simulate the charge and orbital reconstruction induced by a quench dynamics of the applied electric field providing clear-cut mechanisms for the stripe phase formation. Our results open the path for the design of non-volatile electronics based on voltage-controlled nanometric phases., Comment: 14 pages, 9 figures

Localization of individuals in a built environment is a growing research topic. Estimating the positions, face orientation (or gaze direction) and trajectories of people through space has many uses, such as in crowd management, security, and healthcare. In this work, we present an open-source, low-cost, scalable and privacy-preserving edge computing framework for multi-person localization, i.e. estimating the positions, orientations, and trajectories of multiple people in an indoor space. Our computing framework consists of 38 Tensor Processing Unit (TPU)-enabled edge computing camera systems placed in the ceiling of the indoor therapeutic space. The edge compute systems are connected to an on-premise fog server through a secure and private network. A multi-person detection algorithm and a pose estimation model run on the edge TPU in real-time to collect features which are used, instead of raw images, for downstream computations. This ensures the privacy of individuals in the space, reduces data transmission/storage and improves scalability. We implemented a Kalman filter-based multi-person tracking method and a state-of-the-art body orientation estimation method to determine the positions and facing orientations of multiple people simultaneously in the indoor space. For our study site with size of 18,000 square feet, our system demonstrated an average localization error of 1.41 meters, a multiple-object tracking accuracy score of 62%, and a mean absolute body orientation error of 29{\deg}, which is sufficient for understanding group activity behaviors in indoor environments. Additionally, our study provides practical guidance for deploying the proposed system by analyzing various elements of the camera installation with respect to tracking accuracy.

Multi-orbital physics in quasi-two-dimensional electron gases (q2DEGs) triggers unique phenomena not observed in bulk materials, such as unconventional superconductivity and magnetism. Here, we investigate the mechanism of orbital selective switching of the spin-polarization in the oxide q2DEG formed at the (001) interface between the LaAlO$_{3}$, EuTiO$_{3}$ and SrTiO$_{3}$ band insulators. By using density functional theory calculations, transport, magnetic and x-ray spectroscopy measurements, we find that the filling of titanium-bands with 3d$_{xz,yz}$ orbital character in the EuTiO3 layer and at the interface with SrTiO$_{3}$ induces an antiferromagnetic to ferromagnetic switching of the exchange interaction between Eu-4f$^{7}$ magnetic moments. The results explain the observation of the carrier density dependent ferromagnetic correlations and anomalous Hall effect in this q2DEG, and demonstrate how combined theoretical and experimental approaches can lead to a deeper understanding of novel electronic phases and serve as a guide for the materials design for advanced electronic applications.

Oxide heterostructures represent a unique playground for triggering the emergence of novel electronic states and for implementing new device concepts. The discovery of 2D conductivity at the $LaAlO_3/SrTiO_3$ interface has been linking for over a decade two of the major current research fields in Materials Science: correlated transition-metal-oxide systems and low-dimensional systems. A full merging of these two fields requires nevertheless the realization of $LaAlO_3/SrTiO_3$ heterostructures in the form of freestanding membranes. Here we show a completely new method for obtaining oxide hetero-membranes with micrometer lateral dimensions. Unlike traditional thin-film-based techniques developed for semiconductors and recently extended to oxides, the concept we demonstrate does not rely on any sacrificial layer and is based instead on pure strain engineering. We monitor through both real-time and post-deposition analyses, performed at different stages of growth, the strain relaxation mechanism leading to the spontaneous formation of curved hetero-membranes. Detailed transmission electron microscopy investigations show that the membranes are fully epitaxial and that their curvature results in a huge strain gradient, each of the layers showing a mixed compressive/tensile strain state. Electronic devices are fabricated by realizing ad hoc circuits for individual micro-membranes transferred on silicon chips. Our samples exhibit metallic conductivity and electrostatic field effect similar to 2D-electron systems in bulk heterostructures. Our results open a new path for adding oxide functionality into semiconductor electronics, potentially allowing for ultra-low voltage gating of a superconducting transistors, micromechanical control of the 2D electron gas mediated by ferroelectricity and flexoelectricity, and on-chip straintronics., Comment: 8 pages, 4 figures

Understanding Covid-19 lethality and its variation from country to country is essential for supporting governments in the choice of appropriate strategies. Adopting correct indicators to monitor the lethality of the infection in the course of the outbreak is a crucial issue. This works highlights how far the time-dependent case fatality rate is a misleading indicator for estimating the fatality in the course of the outbreak, even if our attention is only restricted to the subset of confirmed cases. Our analysis proves that the final case fatality ratio for several major European countries is bound to largely exceed 10%. The largely discussed difference in the fatality ratio between Italy and other major European countries, is to be mostly attributed (except for the case of Germany) to the more advanced stage of the Italian epidemic., Comment: three pages, one table, three figures

The sudden spread of Covid-19 outside China has pushed on March 11 the World Health Organization to acknowledge the ongoing outbreak as a pandemic. It is crucial in this phase to understand what should countries which presently lag behind in the spread of the infection learn from countries where the infection spread earlier. The choice of this work is to prefer timeliness to comprehensiveness. By adopting a purely empirical approach, we will limit ourselves to identifying different phases in the plots of different countries, based on their different functional behaviour, and to make a comparative analysis. The comparative analysis of the registered cases curves highlights remarkable similarities, especially among Western countries, together with some minor but crucial differences. We highlight how timeliness can largely reduce the size of the individual national outbreaks, ultimately limiting the final death toll. Our data suggest that Western governments have not unfortunately shown the capability to anticipate their decisions, based on the experience of countries hit earlier by the outbreak., Comment: 5 pages, four figures (total 9 panels=

Electronic phase separation is crucial for the fascinating macroscopic properties of the LaAlO3/SrTiO3 (LAO/STO) paradigm oxide interface, including the coexistence of superconductivity and ferromagnetism. We investigate this phenomenon using angle-resolved photoelectron spectroscopy (ARPES) in the soft-X-ray energy range, where the enhanced probing depth combined with resonant photoexcitation allow access to fundamental electronic structure characteristics (momentum-resolved spectral function, dispersions and ordering of energy bands, Fermi surface) of buried interfaces. Our experiment uses X-ray irradiation of the LAO/STO interface to tune its oxygen deficiency, building up a dichotomic system where mobile weakly correlated Ti t2g-electrons co-exist with localized strongly correlated Ti eg-ones. The ARPES spectra dynamics under X-ray irradiation shows a gradual intensity increase under constant Luttinger count of the Fermi surface. This fact identifies electronic phase separation (EPS) where the mobile electrons accumulate in conducting puddles with fixed electronic structure embedded in an insulating host phase, and allows us to estimate the lateral fraction of these puddles. We discuss the physics of EPS invoking a theoretical picture of oxygen-vacancy clustering, promoted by the magnetism of the localized Ti eg-electrons, and repelling of the mobile t2g-electrons from these clusters. Our results on the irradiation-tuned EPS elucidate the intrinsic one taking place at the stoichiometric LAO/STO interfaces., Comment: In review with Phys. Rev. Materials

We combine time resolved pump-probe Magneto-Optical Kerr Effect and Photoelectron Spectroscopy experiments supported by theoretical analysis to determine the relaxation dynamics of delocalized electrons in half-metallic ferromagnetic manganite $La_{1-x}Sr_{x}MnO_{3}$. We observe that the half-metallic character of $La_{1-x}Sr_{x}MnO_{3}$ determines the timescale of both the electronic phase transition and the quenching of magnetization, revealing a quantum isolation of the spin system in double exchange ferromagnets extending up to hundreds of picoseconds. We demonstrate the use of time-resolved hard X-ray photoelectron spectroscopy (TR-HAXPES) as a unique tool to single out the evolution of strongly correlated electronic states across a second-order phase transition in a complex material., Comment: Article 25 pages, 6 figures

We used x-ray absorption spectroscopy to study the orbital symmetry and the energy band splitting of (111) LaAlO${_3}$/SrTiO${_3}$ and LaAlO${_3}$/EuTiO${_3}$/SrTiO${_3}$ heterostructures, hosting a quasi two-dimensional electron system (q2DES), and of a Ti-terminated (111) SrTiO${_3}$ single crystal, also known to form a q2DES at its surface. We demonstrate that the bulk tetragonal Ti-3d D${_4}$${_h}$ crystal field is turned into trigonal D${_3}$${_d}$ crystal field in all cases. The symmetry adapted a${_1}$${_g}$ and e${^\pi_g}$ orbitals are non-degenerate in energy and their splitting, \Delta, is positive at the bare STO surface but negative in the heterostructures, where the a${_1}$${_g}$ orbital is lowest in energy. These results demonstrate that the interfacial symmetry breaking induced by epitaxial engineering of oxide interfaces has a dramatic effect on their electronic properties, and it can be used to manipulate the ground state of the q2DES., Comment: 6 pages article, plus 5 pages supplementary information

We have used grazing-angle infrared spectroscopy to detect the Berreman effect (BE) in the quasi-two-dimensional electron system (q-2DES) which forms spontaneously at the interface between SrTiO$_{3}$ (STO) and a thin film of LaAlO$_3$ (LAO). From the BE, which allows one to study longitudinal optical excitations in ultrathin films like the q-2DES, we have extracted at different temperatures its thickness, the charge density and mobility of the carriers under crystalline LAO (sample A), and the charge density under amorphous LAO (sample B). This quantity turns out to be higher than in sample A, but a comparison with Hall measurements shows that under amorphous LAO the charges are partly localized at low $T$ with a low activation energy (about 190 K in $k_B$ units), and are thermally activated according to a model for large polarons. The thickness of the q-2DES extracted from our spectra turns out to be 4 $\pm 1$ nm for crystalline LAO, 7 $\pm 2$ nm for amorphous LAO., Comment: 21 pages, 7 figures

Oxide growth with semiconductor-like accuracy has led to atomically precise thin films and interfaces that exhibit a plethora of phases and functionalities not found in the oxide bulk material. This yielded spectacular discoveries such as the conducting, magnetic or even superconducting LaAlO$_3$/SrTiO$_3$ interfaces separating two prototypical insulating perovskite materials. All these investigations, however, consider the static state at the interface, although studies on fast oxide interface dynamics would introduce a powerful degree of freedom to understanding the nature of the LaAlO$_3$/SrTiO$_3$ interface state. Here we show that the polarization state at the LaAlO$_3$/SrTiO$_3$ interface can be optically enhanced or attenuated within picoseconds. Our observations are explained by a model based on charge propagation effects in the interfacial vicinity and transient polarization buildup at the interface.

The field-effect-induced modulation of transport properties of 2-dimensional electron gases residing at the LaAlO$_3$/SrTiO$_3$ and LaGaO$_3$/SrTiO$_3$ interfaces has been investigated in a back-gate configuration. Both samples with crystalline and with amorphous overlayers have been considered. We show that the "na\"ive" standard scenario, in which the back electrode and the 2-dimensional electron gas are simply modeled as capacitor plates, dramatically fails in describing the observed phenomenology. Anomalies appearing after the first low-temperature application of a positive gate bias, and causing a non-volatile perturbation of sample properties, are observed in all our samples. Such anomalies are shown to drive low-carrier density samples to a persistent insulating state. Recovery of the pristine metallic state can be either obtained by a long room-temperature field annealing, or, instantaneously, by a relatively modest dose of visible-range photons. Illumination causes a sudden collapse of the electron system back to the metallic ground state, with a resistivity drop exceeding four orders of magnitude. The data are discussed and interpreted on the base of the analogy with floating-gate MOSFET devices, which sheds a new light on the effects of back-gating on oxide-based 2-dimensional electron gases. A more formal approach, allowing for a semi-quantitative estimate of the relevant surface carrier densities for different samples and under different back-gate voltages, is proposed in the Appendix., Comment: 12 pages, 8 figures, submitted to PRX

We report the relationship between epitaxial strain and the crystallographic orientation of the in-phase rotation axis and A-site displacements in Pbnm-type perovskite films. Synchrotron diffraction measurements of EuFeO3 films under strain states ranging from 2% compressive to 0.9% tensile on cubic or rhombohedral substrates exhibit a combination of a-a+c- and a+a-c- rotational patterns. We compare the EuFeO3 behavior with previously reported experimental and theoretical work on strained Pbnm-type films on non-orthorhombic substrates, as well as additional measurements from LaGaO3, LaFeO3, and Eu0.7Sr0.3MnO3 films on SrTiO3. Compiling the results from various material systems reveals a general strain dependence in which compressive strain strongly favors a-a+c- and a+a-c- rotation patterns and tensile strain weakly favors a-a-c+ structures. In contrast, EuFeO3 films grown on Pbnm-type GdScO3 under 2.3% tensile strain take on a uniform a-a+c- rotation pattern imprinted from the substrate, despite strain energy considerations that favor the a-a-c+ pattern. These results point to the use of substrate imprinting as a more robust route than strain for tuning the crystallographic orientations of the octahedral rotations and A-site displacements needed to realize rotation-induced hybrid improper ferroelectricity in oxide heterostructures., Comment: submitted to PRB, comments welcomed

The fabrication of oxide electronics devices is presently hindered by the lack of standardized and well established patterning procedures, applicable down to the nanoscale. In this work, the authors propose a procedure to obtain patterns with resolution around 100 nm on (La,Sr)MnO3/LaAlO3/SrTiO3 heterostructures. Our method is based on a multistep technique, which includes wet and dry etching, epitaxial masking, and e-beam lithography. Our procedure is devised to define independent patterns on the interfacial two dimensional electron gas and on the metallic top electrode, while preserving an all-in situ approach for the heterostructure growth. The authors show results on nano-scale devices based on (La,Sr)MnO3/LaAlO3/SrTiO3, suitable for oxide spintronics applications.

The time-resolved photoconductance of amorphous and crystalline LaAlO$_3$/SrTiO$_3$ interfaces, both hosting an interfacial 2-dimensional electron gas, is investigated under irradiation by variable-wavelengths, visible or ultraviolet photons. Unlike bare SrTiO$_3$ single crystals, showing relatively small photoconductance effects, both kinds of interfaces exhibit an intense and highly persistent photoconductance with extraordinarily long characteristic times. The temporal behaviour of the extra photoinduced conductance persisting after light irradiation shows a complex dependence on interface type (whether amorphous or crystalline), sample history and irradiation wavelength. \textcolor{black}{The experimental results indicate that different mechanisms of photoexcitation are responsible for the photoconductance of crystalline and amorphous LaAlO$_3$/SrTiO$_3$ interfaces under visible light. We propose that the response of crystalline samples is mainly due to the promotion of electrons from the valence bands of both SrTiO$_3$ and LaAlO$_3$. This second channel is less relevant in amorphous LaAlO$_3$/SrTiO$_3$, where the higher density of point defects plays instead a major role., Comment: 8 pages, 5 figures, 3 tables, accepted on Scientific Reports 2015

We studied the structural, magnetic and transport properties of LaAlO3/EuTiO3/SrTiO3 heterostructures grown by Pulsed Laser Deposition. The samples have been characterized in-situ by electron diffraction and scanning probe mi-croscopy and ex-situ by transport measurements and x-ray absorption spectroscopy. LaAlO3/EuTiO3/SrTiO3 films show a ferromagnetic transition at T<7.5 K, related to the ordering of Eu2+ spins, even in samples characterized by just two EuTiO3 unit cells. A finite metallic conductivity is observed only in the case of samples composed by one or two EuTiO3 unit cells and, simultaneously, by a LaAlO3 thickness equal or above 4 unit cells. The role of ferromagnetic EuTiO3 on the transport properties of delta-doped LaAlO3/EuTiO3/SrTiO3 is critically discussed.

LaAlO$_{3}$ and NdGaO$_{3}$ thin films of different thickness have been grown by pulsed laser deposition on TiO$_2$-terminated SrTiO$_{3}$ single crystals and investigated by soft X-ray photoemission spectroscopy. The surface sensitivity of the measurements has been tuned by varying photon energy $h\nu$ and emission angle $\Theta$. In contrast to the core levels of the other elements, the Sr $3d$ line shows an unexpected splitting for higher surface sensitivity, signaling the presence of a second strontium component. From our quantitative analysis we conclude that during the growth process Sr atoms diffuse away from the substrate and segregate at the surface of the heterostructure, possibly forming strontium oxide.

The voltage-spectral density SV(f) of the 2-dimensional electron gas formed at the interface of LaAlO3 /SrTiO3 has been thoroughly investigated. The low-frequency component has a clear 1/f behavior with a quadratic bias current dependence, attributed to resistance fluctuations. However, its temperature dependence is inconsistent with the classical Hooge model, based on carrier-mobility fluctuations. The experimental results are, instead, explained in terms of carrier-number fluctuations, due to an excitation-trapping mechanism of the 2-dimensional electron gas., Comment: 4 pages, 4 figures

We report on the transport characterization in dark and under light irradiation of three different interfaces: LaAlO3/SrTiO3, LaGaO3/SrTiO3, and the novel NdGaO3/SrTiO3 heterostructure. All of them share a perovskite structure, an insulating nature of the single building blocks, a polar/non- polar character and a critical thickness of four unit cells for the onset of conductivity. The interface structure and charge confinement in NdGaO3/SrTiO3 are probed by atomic-scale- resolved electron energy loss spectroscopy showing that, similarly to LaAlO3/SrTiO3, extra electronic charge confined in a sheet of about 1.5 nm in thickness is present at the NdGaO3/SrTiO3 interface. Electric transport measurements performed in dark and under radiation show remarkable similarities and provide evidence that the persistent perturbation induced by light is an intrinsic peculiar property of the three investigated oxide-based polar/non-polar interfaces. Our work sets a framework for understanding the previous contrasting results found in literature about photoconductivity in LaAlO3/SrTiO3 and highlights the connection between the origin of persistent photoconductivity and the origin of conductivity itself. An improved understanding of the photo- induced metastable electron-hole pairs might allow to shed a direct light on the complex physics of this system and on the recently proposed perspectives of oxide interfaces for solar energy conversion., Comment: 11 pages, 7 figures

The interface between the band gap insulators LaAlO3 and SrTiO3 is known to host a highly mobile two-dimensional electron gas. Here we report on the fabrication and characterization of the NdGaO3/SrTiO3 interface, that shares with LaAlO3/SrTiO3 an all-perovskite structure, the insulating nature of the single building block and the polar-non polar character. Our work demonstrates that in NdGaO3/SrTiO3 a metallic layer of mobile electrons is formed, with properties comparable to LaAlO3/SrTiO3. The localization of the injected electrons at the Ti sites, within a few unit cells from the interface, was proved by Atomic-scale-resolved EELS analyses. The electric transport and photoconduction of samples were also investigated. We found that irradiation by photons below the SrTiO3 gap does not increase the carrier density, but slightly enhances low temperature mobility. A giant persistent photoconductivity effect was instead observed, even under irradiation by low energy photons, in highly resistive samples fabricated at non-optimal conditions. We discuss the results in the light of different mechanisms proposed for the two-dimensional electron gas formation. Both the ordinary and the persistent photoconductivity in these systems are addressed and analyzed., Comment: 24 pages, 7 figures, submitted to ACS Nano

The discovery that the interface between two band gap insulators LaAlO3 and SrTiO3 is highly conducting has raised an enormous interest in the field of oxide electronics. The LAlO3/SrTiO3 interface can be tuned using an electric field and switched from a superconducting to an insulating state. Conducting paths in an insulating background can be written applying a voltage with the tip of an atomic force microscope, creating great promise for the development of a new generation of nanoscale electronic devices. However, the mechanism for interface conductivity in LaAlO3/SrTiO3 has remained elusive. The theoretical explanation based on an intrinsic charge transfer (electronic reconstruction) has been strongly challenged by alternative descriptions based on point defects. In this work, thanks to modern aberration-corrected electron probes with atomic-scale spatial resolution, interfacial charge and atomic displacements originating the electric field within the system can be simultaneously measured, yielding unprecedented experimental evidence in favor of an intrinsic electronic reconstruction., Comment: Accepted for publication in Advanced Materials. Published online on 06/20/2012

Scanning tunneling spectroscopy suggests the formation of a two dimensional electron gas (2DEG) on the TiO2 terminated surface of undoped SrTiO3 single crystals annealed at temperature lower than 400 {\deg}C in ultra high vacuum conditions. Low energy electron diffraction indicates that the 2D metallic SrTiO3 surface is not structurally reconstructed, suggesting that non-ordered oxygen vacancies created in the annealing process introduce carriers leading to an electronic reconstruction. The experimental results are interpreted in a frame of competition between oxygen diffusion from the bulk to the surface and oxygen loss from the surface itself., Comment: 9 pages, 3 figures, submitted to Physical Review B