Search

Strong $E\times B$ plasma flow shear is beneficial for reducing turbulent transport. However, traditional methods of driving flow shear do not scale well to large devices such as future fusion power plants. In this paper, we use a large number of nonlinear gyrokinetic simulations to study a novel approach to increase flow shear: decreasing the momentum diffusivity to make the plasma ``easier to push''. We first use an idealized circular geometry and find that one can obtain low momentum diffusivity at tight aspect ratio, low safety factor, high magnetic shear and low temperature gradient. This is the so-called Low Momentum Diffusivity (LMD) regime. To drive intrinsic momentum flux, we then tilt the flux surface, making it up-down asymmetric. In the LMD regime, this intrinsic momentum flux drives strong flow shear that can significantly reduce the heat flux and increase the critical temperature gradient. We also consider the actual experimental geometry of the MAST tokamak to illustrate that this strategy can be practical and create experimentally significant flow shear. Lastly, a preliminary prediction for the SMART tokamak is made., Comment: 43 pages, 23 figures

In this work, we study the impact of aspect ratio A = R0 /r (the ratio of major radius R0 to minor radius r) on the confinement benefits of Negative Triangularity (NT) plasma shaping. We use high-fidelity flux tube gyrokinetic GENE simulations and consider several different scenarios: four of them inspired by TCV experimental data, a scenario inspired by DIII-D experimental data and a scenario expected in the new SMART spherical tokamak. The present study reveals a surprising and non-trivial dependence. NT improves confinement at any value of A for ITG turbulence, while for TEM turbulence confinement is improved only in the case of large and conventional aspect ratios. Additionally, through a detailed study of a large aspect ratio case with pure ITG drive, we develop an intuitive physical picture that explains the beneficial effect of NT at large and conventional aspect ratios. This picture does not hold in TEM-dominated regimes, where a complex synergistic effect of many factors is found. Finally, we performed the first linear gyrokinetic simulations of SMART, finding that both NT and PT scenarios are dominated by micro-tearing-mode (MTM) turbulence and that NT is more susceptible to MTMs at tight aspect ratio. However, we found that a regime where ITG dominates in SMART can be found, and in this regime NT is more linearly stable.

This paper presents ExPECA, an edge computing and wireless communication research testbed designed to tackle two pressing challenges: comprehensive end-to-end experimentation and high levels of experimental reproducibility. Leveraging OpenStack-based Chameleon Infrastructure (CHI) framework for its proven flexibility and ease of operation, ExPECA is located in a unique, isolated underground facility, providing a highly controlled setting for wireless experiments. The testbed is engineered to facilitate integrated studies of both communication and computation, offering a diverse array of Software-Defined Radios (SDR) and Commercial Off-The-Shelf (COTS) wireless and wired links, as well as containerized computational environments. We exemplify the experimental possibilities of the testbed using OpenRTiST, a latency-sensitive, bandwidth-intensive application, and analyze its performance. Lastly, we highlight an array of research domains and experimental setups that stand to gain from ExPECA's features, including closed-loop applications and time-sensitive networking.

We study experimentally the processes of parametric excitation in microscopic magnetically saturated disks of nanometer-thick Yttrium Iron Garnet. We show that, depending on the relative orientation between the parametric pumping field and the static magnetization, excitation of either degenerate or non-degenerate magnon pairs is possible. In the latter case, which is particularly important for applications associated with the realization of computation in the reciprocal space, a single-frequency pumping can generate pairs of magnons whose frequencies correspond to different eigenmodes of the disk. We show that, depending on the size of the disk and the modes involved, the frequency difference in a pair can vary in the range 0.1-0.8 GHz. We demonstrate that in this system, one can easily realize a practically important situation where several magnon pairs share the same mode. We also observe the simultaneous generation of up to six different modes using a fixed-frequency monochromatic pumping. Our experimental findings are supported by numerical calculations that allow us to unambiguously identify the excited modes. Our results open new possibilities for the implementation of reciprocal-space computing making use of low damping magnetic insulators., Comment: 18 pages, 4 figures

As language models grow ever larger, the need for large-scale high-quality text datasets has never been more pressing, especially in multilingual settings. The BigScience workshop, a 1-year international and multidisciplinary initiative, was formed with the goal of researching and training large language models as a values-driven undertaking, putting issues of ethics, harm, and governance in the foreground. This paper documents the data creation and curation efforts undertaken by BigScience to assemble the Responsible Open-science Open-collaboration Text Sources (ROOTS) corpus, a 1.6TB dataset spanning 59 languages that was used to train the 176-billion-parameter BigScience Large Open-science Open-access Multilingual (BLOOM) language model. We further release a large initial subset of the corpus and analyses thereof, and hope to empower large-scale monolingual and multilingual modeling projects with both the data and the processing tools, as well as stimulate research around this large multilingual corpus., Comment: NeurIPS 2022, Datasets and Benchmarks Track

European efforts to boost competitiveness in the sector of space services promote the research and development of advanced software and hardware solutions. The EU-funded HERMES project contributes to the effort by qualifying radiation-hardened, high-performance programmable microprocessors, and by developing a software ecosystem that facilitates the deployment of complex applications on such platforms. The main objectives of the project include reaching a technology readiness level of 6 (i.e., validated and demonstrated in relevant environment) for the rad-hard NG-ULTRA FPGA with its ceramic hermetic package CGA 1752, developed within projects of the European Space Agency, French National Centre for Space Studies and the European Union. An equally important share of the project is dedicated to the development and validation of tools that support multicore software programming and FPGA acceleration, including Bambu for High-Level Synthesis and the XtratuM hypervisor with a level one boot loader for virtualization., Comment: Accepted for publication at DATE 2023

We present the parametric excitation of spin-wave modes in YIG micro-disks via parallel pumping. Their spectroscopy is performed using magnetic resonance force microscopy (MRFM), while their spatial profiles are determined by micro-focus Brillouin light scattering (BLS). We observe that almost all the fundamental eigenmodes of an in-plane magnetized YIG micro-disk, calculated using a micromagnetic eigenmode solver, can be excited using the parallel pumping scheme, as opposed to the transverse one. The comparison between the MRFM and BLS data on one side, and the simulations on the other side, provides the complete spectroscopic labeling of over 40 parametrically excited modes. Our findings could be promising for spin-wave-based computation schemes, in which the amplitudes of a large number of spin-wave modes have to be controlled., Comment: 6 pages, 4 figures

Wearable Cognitive Assistance (WCA) applications present a challenge to benchmark and characterize due to their human-in-the-loop nature. Employing user testing to optimize system parameters is generally not feasible, given the scope of the problem and the number of observations needed to detect small but important effects in controlled experiments. Considering the intended mass-scale deployment of WCA applications in the future, there exists a need for tools enabling human-independent benchmarking. We present in this paper the first model for the complete end-to-end emulation of humans in WCA. We build this model through statistical analysis of data collected from previous work in this field, and demonstrate its utility by studying application task durations. Compared to first-order approximations, our model shows a ~36% larger gap between step execution times at high system impairment versus low. We further introduce a novel framework for stochastic optimization of resource consumption-responsiveness tradeoffs in WCA, and show that by combining this framework with our realistic model of human behavior, significant reductions of up to 50% in number processed frame samples and 20% in energy consumption can be achieved with respect to the state-of-the-art., Comment: 16 total pages. 12 figures, 2 tables, 1 appendix. Main document body by Manuel Olgu\'in Mu\~noz and Vishnu N. Moothedath; appendix by Vishu N. Moothedath and Jaya Prakash Champati; editing and feedback by all authors; funding by James Gross and Mahadev Satyanarayanan. Submitted to IEEE Transactions on Mobile Computing

Large language models (LLMs) have been shown to be able to perform new tasks based on a few demonstrations or natural language instructions. While these capabilities have led to widespread adoption, most LLMs are developed by resource-rich organizations and are frequently kept from the public. As a step towards democratizing this powerful technology, we present BLOOM, a 176B-parameter open-access language model designed and built thanks to a collaboration of hundreds of researchers. BLOOM is a decoder-only Transformer language model that was trained on the ROOTS corpus, a dataset comprising hundreds of sources in 46 natural and 13 programming languages (59 in total). We find that BLOOM achieves competitive performance on a wide variety of benchmarks, with stronger results after undergoing multitask prompted finetuning. To facilitate future research and applications using LLMs, we publicly release our models and code under the Responsible AI License.

Experimental research on wireless networking in combination with edge and cloud computing has been the subject of explosive interest in the last decade. This development has been driven by the increasing complexity of modern wireless technologies and the extensive softwarization of these through projects such as a Open Radio Access Network (O-RAN). In this context, a number of small- to mid-scale testbeds have emerged, employing a variety of technologies to target a wide array of use-cases and scenarios in the context of novel mobile communication technologies such as 5G and beyond-5G. Little work, however, has yet been devoted to developing a standard framework for wireless testbed automation which is hardware-agnostic and compatible with edge- and cloud-native technologies. Such a solution would simplify the development of new testbeds by completely or partially removing the requirement for custom management and orchestration software. In this paper, we present the first such mostly hardware-agnostic wireless testbed automation framework, Ainur. It is designed to configure, manage, orchestrate, and deploy workloads from an end-to-end perspective. Ainur is built on top of cloud-native technologies such as Docker, and is provided as FOSS to the community through the KTH-EXPECA/Ainur repository on GitHub. We demonstrate the utility of the platform with a series of scenarios, showcasing in particular its flexibility with respect to physical link definition, computation placement, and automation of arbitrarily complex experimental scenarios., Comment: 6 pages, 6 figures, demo session paper

The exfoliation of two naturally occurring van der Waals minerals, graphite and molybdenite, arouse an unprecedented level of interest by the scientific community and shaped a whole new field of research: 2D materials research. Several years later, the family of van der Waals materials that can be exfoliated to isolate 2D materials keeps growing, but most of them are synthetic. Interestingly, in nature plenty of naturally occurring van der Waals minerals can be found with a wide range of chemical compositions and crystal structures whose properties are mostly unexplored so far. This Perspective aims to provide an overview of different families of van der Waals minerals to stimulate their exploration in the 2D limit., Comment: Perspective article. 34 pages, 10 figures, 1 table, more than 170 references