Search

Much of the seismic activity of northern Sweden consists of micro-earthquakes occurring near postglacial faults. However, larger magnitude earthquakes do occur in Sweden, and earthquake statistics indicate that a magnitude 5 event is likely to occur once every century. This paper presents dynamic analyses of the effects of larger earthquakes on an upstream tailings dam at the Aitik copper mine in northern Sweden. The analyses were performed to evaluate the potential for liquefaction and to assess stability of the dam under two specific earthquakes: a commonly occurring magnitude 3.6 event and a more extreme earthquake of magnitude 5.8. The dynamic analyses were carried out with the finite element program PLAXIS using a recently implemented constitutive model called UBCSAND. The results indicate that the magnitude 5.8 earthquake would likely induce liquefaction in a limited zone located below the ground surface near the embankment dikes. It is interpreted that stability of the dam may not be affected due to the limited extent of the liquefied zone. Both types of earthquakes are predicted to induce tolerable magnitudes of displacements. The results of the postseismic slope stability analysis, performed for a state after a seismic event, suggest that the dam is stable during both the earthquakes.

Pre-existing bedrock structures that reactivated following deglaciation through a combination of tectonic and isostatic stresses are well documented in northern Fennoscandia. Due to their possible implications for seismic hazards, there is a need to document the locations and geometries of these features. The recent availability of a high-resolution, LiDAR-derived, digital elevation model covering most of Sweden provides an ideal base upon which to map post-glacial fault scarps that appear to crosscut glacial sediments and landforms. The current mapping project has identified new post-glacial fault scarps in central Sweden, and both refined and rejected scarps previously mapped by aerial photographic interpretation in northern Sweden. No post-glacial fault scarps, however, were identified in southern Sweden. The current inventory of post-glacial fault scarps is available for download and will be updated as more data become available. [ABSTRACT FROM PUBLISHER]

Nordland in northern Norway is characterized by enhanced seismicity and uplift that makes it the most tectonically active area in Norway. This study is part of a project entitled Neotectonics in Norway-Implications for Petroleum Exploration, which aims at enhancing the understanding of regional-scale stress and strain dynamics in Nordland, and to impact risk and hazard assessment and petroleum exploration. This paper attempts to constrain the orientation of in situ horizontal stress using high-resolution acoustic televiewer logging data. The Geological Survey of Norway has drilled two 0.8 km deep near-vertical boreholes on opposite sides of the Vestfjord in Nordland, the open bight of sea that separates the Lofoten archipelago from the Norwegian mainland. Both boreholes are drilled just North of 68°N, with borehole Leknes Bh located near the geographic center of the Lofoten archipelago, and borehole Drag Bh located on approximate equal distance from the shore, on the Norwegian mainland. The results of this study are in most practical aspects inconclusive, mainly due to poor data quality. The data analysis has revealed erroneously high-borehole diameter, and several artifacts such as eccentric logging tool, rugose borehole wall, spiral hole, tool sticking and missing data. Four intervals with passive in situ stress indicators (borehole breakout and drilling-induced fractures) were found in travel time and amplitude images of the Drag Bh, suggesting approximately N-S orientation of maximum horizontal stress. However, these intervals are not found in cross-plots. Either result yields the lowest World Stress Map ranking quality (E). [ABSTRACT FROM AUTHOR]