Search

Bioactive agents have demonstrated regenerative potential for cell-free bone tissue engineering. Nevertheless, certain challenges persist, including ineffective delivery methods and confined therapeutic potency. Here, we demonstrated that the biomimetic calcium phosphate coating system (BioCaP) could effectively uptake and slowly release the incorporated bioactive agents compared to the surface absorption system via osteoclast-mediated degradation of BioCaP coatings. The release kinetics were determined as a function of time. The release rate was stable without remarkable burst release during the first 1 day, followed by a sustained release from day 7 to day 19. Then, we developed the bi-functional BioCaP-coated silk fibroin scaffolds enabling the effective co-delivery of TGF-β3 and BMP-2 (SFI-T/SFI-B) and the corresponding slow release of TGF-β3 and BMP-2 exhibited superior potential in promoting chondrogenesis and osteogenesis without impairing cell vitality in vitro. The SFI-T/SFI-B scaffolds could improve cartilage and bone regeneration in 5 × 4 mm rabbit osteochondral (OC) defect. These findings indicate that the biomimetic calcium-phosphate coated silk fibroin scaffolds with slowly co-released TGF-β3 and BMP-2 effectively promote the repair of OC defects, hence facilitating the future clinical translation of controlled drug delivery in tissue engineering., (© 2024. The Author(s).)

The lack of representative in vitro models recapitulating human tendon (patho)physiology is among the major factors hindering consistent progress in the knowledge-based development of adequate therapies for tendinopathy.Here, an organotypic 3D tendon-on-chip model is designed that allows studying the spatiotemporal dynamics of its cellular and molecular mechanisms.Combining the synergistic effects of a bioactive hydrogel matrix with the biophysical cues of magnetic microfibers directly aligned on the microfluidic chip, it is possible to recreate the anisotropic architecture, cell patterns, and phenotype of tendon intrinsic (core) compartment. When incorporated with vascular-like vessels emulating the interface between its intrinsic-extrinsic compartments, crosstalk with endothelial cells are found to drive stromal tenocytes toward a reparative profile. This platform is further used to study adaptive immune cell responses at the onset of tissue inflammation, focusing on interactions between tendon compartment tenocytes and circulating T cells.The proinflammatory signature resulting from this intra/inter-cellular communication induces the recruitment of T cells into the inflamed core compartment and confirms the involvement of this cellular crosstalk in positive feedback loops leading to the amplification of tendon inflammation.Overall, the developed 3D tendon-on-chip provides a powerful new tool enabling mechanistic studies on the pathogenesis of tendinopathy as well as for assessing new therapies., (© 2024 The Author(s). Advanced Science published by Wiley‐VCH GmbH.)

3D in vitro model has emerged as a valuable tool for studying tissue development, drug screening, and disease modeling. 3D systems can accurately replicate tissue microstructures and physiological features, mirroring the in vivo microenvironment departing from conventional 2D cell cultures. Various 3D in vitro models utilizing biomacromolecules like collagen and synthetic polymers have been developed to meet diverse research needs and address the complex challenges of contemporary research. Silk proteins, bearing structural and functional similarities to collagen, have been increasingly employed to construct advanced 3D in vitro systems, surpassing the limitations of 2D cultures. This review examines silk proteins' composition, structure, properties, and functions, elucidating their role in 3D in vitro models. Furthermore, recent advances in biomedical applications involving silk-based organoid models are discussed. In particular, the unique physiological attributes of silk matrix constituents in in vitro tissue constructs are highlighted, providing a meticulous evaluation of their importance. Additionally, it outlines the current research hurdles and complexities while contemplating future avenues, thereby paving the way for developing complex and biomimetic silk protein-based microtissues., (© 2024 Wiley‐VCH GmbH.)

The functional restoration of a damaged cardiac tissue relies on a synchronized contractile capacity of exogenous and/or endogenous cardiomyocytes, which is challenging to achieve. Here, we explored the potential of the short glycopeptide diphenylalanine glucosamine-6-sulfate (FFGlcN6S) conjugated with an aromatic moiety, namely fluorenylmethoxycarbonyl (Fmoc), to enhance cardiac tissue regeneration. At physiological conditions, Fmoc-FFGlcN6S assembles into nanofibrous hydrated meshes, i.e., matrix mimicking hydrogels. These hydrogels can be further micropatterned allowing co-existence of hierarchical structures at different lenght. The patterned hydrogels support the culture of induced pluripotent stem cell-derived cardiomyocytes (iPSC-CMs) and promote their alignment. The cultured iPSC-CMs exhibit anisotropic synchronized contractions, indicating maturation and electrical interconnectivity. Moreover, the cultures express specific cardiac markers including, connexin-43 and sarcomeric-α-actinin, confirming enhanced cell-cell crosstalk, spontaneous contractility, and efficient transmission of electrical signals. Our results showcase the potential of short amphiphilic glycopeptides to mimic physical and biochemical cues that are essential for cardiomyocytes functionality and thus, these conjugates can be used in cardiac tissue engineering and regeneration., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Integrating biological material within soft microfluidic systems made of hydrogels offers countless possibilities in biomedical research to overcome the intrinsic limitations of traditional microfluidics based on solid, non-biodegradable, and non-biocompatible materials. Hydrogel-based microfluidic technologies have the potential to transform in vitro cell/tissue culture and modeling. However, most hydrogel-based microfluidic platforms are associated with device deformation, poor structural definition, reduced stability/reproducibility due to swelling, and a limited range in rigidity, which threatens their applicability. Herein, we describe a new methodological approach for developing a soft cell-laden microfluidic device based on enzymatically-crosslinked silk fibroin (SF) hydrogels. Its unique mechano-chemical properties and high structural fidelity, make this platform especially suited for in vitro disease modelling, as demonstrated by reproducing the native dynamic 3D microenvironment of colorectal cancer and its response to chemotherapeutics in a simplistic way. Results show that from all the tested concentrations, 14 wt% enzymatically-crosslinked SF microfluidic platform has outstanding structural stability and the ability to perfuse fluid while displaying in vivo -like biological responses. Overall, this work shows a novel technique to obtain an enzymatically-crosslinked SF microfluidic platform that can be employed for developing soft lab-on-a-chip in vitro models., (© 2024 IOP Publishing Ltd. All rights, including for text and data mining, AI training, and similar technologies, are reserved.)

The biosafety concerns associated with fecal microbiota transplant (FMT) limit their clinical application in treating ulcerative colitis (UC). Gut microbiota secrete abundant extracellular vesicles (Gm-EVs), which play a critical role in bacteria-to-bacteria and bacteria-to-host communications. Herein, intestinal microbiota are trained using tea leaf lipid/pluronic F127-coated curcumin nanocrystals (CN@Lp 127 s), which can maintain stability during transit through the gastrointestinal tract. Compared with FMT, Gm-EVs derived from healthy mice significantly improve treatment outcomes against UC by reducing colonic inflammatory responses, restoring colonic barrier function, and rebalancing intestinal microbiota. Strikingly, Gm-EVs obtained from CN@Lp 127 -trained healthy mice exhibit a superior therapeutic effect on UC compared to groups receiving FMT from healthy mice, Gm-EVs from healthy mice, and FMT from CN@Lp 127 -trained healthy mice. Oral administration of Gm-EVs from CN@Lp 127 -trained healthy mice not only alleviates colonic inflammation, promotes mucosal repair, and regulates gut microbiota but also regulates purine metabolism to decrease the uric acid level, resulting in a robust improvement in the UC. This study demonstrates the UC therapeutic efficacy of Gm-EVs derived from nanomedicine-trained gut microbiota in regulating the immune microenvironment, microbiota, and purine metabolism of the colon. These EVs provide an alternative platform to replace FMT as a treatment for UC., (© 2024 Wiley‐VCH GmbH.)

Hydrogels are dynamically evolving 3D networks composed of hydrophilic polymer scaffolds with significant applications in the healthcare and environmental sectors. Notably, protein-based hydrogels mimic the extracellular matrix, promoting cell adhesion. Further enhancing cell proliferation within these scaffolds are matrix-metalloproteinase-triggered amino acid motifs. Integration of cell-friendly modules like peptides and proteins expands hydrogel functionality. These exceptional properties position hydrogels for diverse applications, including biomedicine, biosensors, environmental remediation, and the food industry. Despite significant progress, there is ongoing research to optimize hydrogels for biomedical and environmental applications further. Engineering novel hydrogels with favorable characteristics is crucial for regulating tissue architecture and facilitating ecological remediation. This review explores the synthesis, physicochemical properties, and biological implications of various hydrogel types and their extensive applications in biomedicine and environmental sectors. It elaborates on their potential applications, bridging the gap between advancements in the healthcare sector and solutions for environmental issues., (© 2024 Wiley‐VCH GmbH.)

Although photodynamic therapy (PDT) has great potential for treating severely infected wounds, it is restricted by the short lifetime, limited diffusion distance of reactive oxygen species (ROS), and incomplete contact with bacteria. Herein, we report a novel nanosized ionic porous organic polymer (TPAPy-IPOP) based on the triphenylamine (TPA) moiety. Strong electron-deficient cationic groups were introduced into TPA to construct the donor-acceptor (D-A) system, in which the photoelectric effect of TPAPy-IPOP was greatly enhanced, and it was easily excited to produce ROS under irradiation with visible light. The introduction of cations not only facilitated bacterial adsorption by TPAPy-IPOP via electrostatic attraction, which was more conducive to killing bacteria by ROS, but also inactivated bacteria by the cations directly. The nanosized TPAPy-IPOP remained suspended in water for several months and could be sprayed onto various substrates to form a durable coating with excellent antibacterial properties. The in vivo results proved that the silk fibroin/polyvinyl alcohol non-woven fabric (SF/PVA) coated with TPAPy-IPOP could create and maintain a sterile microenvironment at a wound site. The rapid reduction in inflammation resulting from its bactericidal action accelerated the wound healing rate. Collectively, this design is expected to offer a generalizable approach for developing novel antibacterial therapeutic photosensitizers, especially for infected wound treatment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Silk fibroin material has good mechanical properties and excellent biocompatibility as a natural biomaterial with broad application prospects. However, by applying regenerated silk fibroin in biomaterials with high mechanical strength requirements, such as bone materials, there are problems, such as insufficient mechanical properties and a significant decline in mechanical properties in the wet state. In this report, a silk fibroin composite that maintains high strength in the wet state was prepared by adding nano-SiO 2 as a nano-strengthening filler to the silk protein material and employing an epoxy-based silane coupling agent KH560 as an interfacial reinforcing agent. The results showed that the dry compressive strength of the composite material was substantially increased compared with that of the pure silk protein material; the wet compressive strength was significantly increased compared with that of the pure silk fibroin material, and the decrease of the mechanical properties in the wet state was low. The cytotoxicity test results of the composites showed that the materials were not cytotoxic. Rat bone marrow mesenchymal stem cells were cultured on the surface of the composites, and the results indicated that the composites could support the proliferation of bone marrow mesenchymal stem cells. The silk fibroin nanocomposites developed in this work can be applied as bone repair materials., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

3D bioprinting is recognized as the ultimate additive biomanufacturing technology in tissue engineering and regeneration, augmented with intelligent bioinks and bioprinters to construct tissues or organs, thereby eliminating the stipulation for artificial organs. For 3D bioprinting of soft tissues, such as kidneys, hearts, and other human body parts, formulations of bioink with enhanced bioinspired rheological and mechanical properties were essential. Nanomaterials-based hybrid bioinks have the potential to overcome the above-mentioned problem and require much attention among researchers. Natural and synthetic nanomaterials such as carbon nanotubes, graphene oxides, titanium oxides, nanosilicates, nanoclay, nanocellulose, etc. and their blended have been used in various 3D bioprinters as bioinks and benefitted enhanced bioprintability, biocompatibility, and biodegradability. A limited number of articles were published, and the above-mentioned requirement pushed us to write this review. We reviewed, explored, and discussed the nanomaterials and nanocomposite-based hybrid bioinks for the 3D bioprinting technology, 3D bioprinters properties, natural, synthetic, and nanomaterial-based hybrid bioinks, including applications with challenges, limitations, ethical considerations, potential solution for future perspective, and technological advancement of efficient and cost-effective 3D bioprinting methods in tissue regeneration and healthcare.

The therapeutic efficacy of oral nanotherapeutics against colorectal cancer (CRC) is restricted by inadequate drug accumulation, immunosuppressive microenvironment, and intestinal microbiota imbalance. To overcome these challenges, we elaborately constructed 6-gingerol (Gin)-loaded magnetic mesoporous silicon nanoparticles and functionalized their surface with mulberry leaf-extracted lipids (MLLs) and Pluronic F127 (P 127 ). In vitro experiments revealed that P 127 functionalization and alternating magnetic fields (AMFs) promoted internalization of the obtained P 127 -MLL@Gins by colorectal tumor cells and induced their apoptosis/ferroptosis through Gin/ferrous ion-induced oxidative stress and magneto-thermal effect. After oral administration, P 127 -MLL@Gins safely passed to the colorectal lumen, infiltrated the mucus barrier, and penetrated into the deep tumors under the influence of AMFs. Subsequently, the P 127 -MLL@Gin (+ AMF) treatment activated antitumor immunity and suppressed tumor growth. We also found that this therapeutic modality significantly increased the abundance of beneficial bacteria (e.g., Bacillus and unclassified-c-Bacilli), reduced the proportions of harmful bacteria (e.g., Bacteroides and Alloprevotella), and increased lipid oxidation metabolites. Strikingly, checkpoint blockers synergistically improved the therapeutic outcomes of P 127 -MLL@Gins (+ AMF) against orthotopic and distant colorectal tumors and significantly prolonged mouse life spans. Overall, this oral therapeutic platform is a promising modality for synergistic treatment of CRC., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The progression of ulcerative colitis (UC) is associated with immunologic derangement, intestinal hemorrhage, and microbiota imbalance. While traditional medications mainly focus on mitigating inflammation, it remains challenging to address multiple symptoms. Here, a versatile gas-propelled nanomotor was constructed by mild fusion of post-ultrasonic CaO 2 nanospheres with Cu 2 O nanoblocks. The resulting CaO 2 -Cu 2 O possessed a desirable diameter (291.3 nm) and a uniform size distribution. It could be efficiently internalized by colonic epithelial cells and macrophages, scavenge intracellular reactive oxygen/nitrogen species, and alleviate immune reactions by pro-polarizing macrophages to the anti-inflammatory M2 phenotype. This nanomotor was found to penetrate through the mucus barrier and accumulate in the colitis mucosa due to the driving force of the generated oxygen bubbles. Rectal administration of CaO 2 -Cu 2 O could stanch the bleeding, repair the disrupted colonic epithelial layer, and reduce the inflammatory responses through its interaction with the genes relevant to blood coagulation, anti-oxidation, wound healing, and anti-inflammation. Impressively, it restored intestinal microbiota balance by elevating the proportions of beneficial bacteria ( e.g. , Odoribacter and Bifidobacterium ) and decreasing the abundances of harmful bacteria ( e.g. , Prevotellaceae and Helicobacter ). Our gas-driven CaO 2 -Cu 2 O offers a promising therapeutic platform for robust treatment of UC via the rectal route., Competing Interests: The authors have no conflicts of interest to declare., (© 2024 The Authors.)

Oral treatment of colon diseases with the CRISPR/Cas9 system has been hampered by the lack of a safe and efficient delivery platform. Overexpressed CD98 plays a crucial role in the progression of ulcerative colitis (UC) and colitis-associated colorectal cancer (CAC). In this study, lipid nanoparticles (LNPs) derived from mulberry leaves are functionalized with Pluronic copolymers and optimized to deliver the CRISPR/Cas gene editing machinery for CD98 knockdown. The obtained LNPs possessed a hydrodynamic diameter of 267.2 nm, a narrow size distribution, and a negative surface charge (-25.6 mV). Incorporating Pluronic F127 into LNPs improved their stability in the gastrointestinal tract and facilitated their penetration through the colonic mucus barrier. The galactose end groups promoted endocytosis of the LNPs by macrophages via asialoglycoprotein receptor-mediated endocytosis, with a transfection efficiency of 2.2-fold higher than Lipofectamine 6000. The LNPs significantly decreased CD98 expression, down-regulated pro-inflammatory cytokines (TNF-α and IL-6), up-regulated anti-inflammatory factors (IL-10), and polarized macrophages to M2 phenotype. Oral administration of LNPs mitigated UC and CAC by alleviating inflammation, restoring the colonic barrier, and modulating intestinal microbiota. As the first oral CRISPR/Cas9 delivery LNP, this system offers a precise and efficient platform for the oral treatment of colon diseases., (© 2024 Wiley‐VCH GmbH.)

The biomedical application of nanotechnology in cancer treatment has demonstrated significant potential for improving treatment efficiencies and ameliorating adverse effects. However, the medical translation of nanotechnology-based nanomedicines faces challenges including hazardous environmental effects, difficulties in large-scale production, and possible excessive costs. In the present study, we extracted and purified natural exosome-like nanoparticles (ELNs) from Phellinus linteus . These nanoparticles (denoted as P-ELNs) had an average particle size of 154.1 nm, displayed a negative zeta potential of -31.3 mV, and maintained stability in the gastrointestinal tract. Furthermore, P-ELNs were found to contain a diverse array of functional components, including lipids and pharmacologically active small-molecule constituents. In vitro investigations suggested that they exhibited high internalization efficiency in liver tumor cells (Hepa 1-6) and exerted significant anti-proliferative, anti-migratory, and anti-invasive effects against Hepa 1-6 cells. Strikingly, the therapeutic outcomes of oral P-ELNs were confirmed in an animal model of metastatic hepatocellular carcinoma by amplifying reactive oxygen species (ROS) and rebalancing the gut microbiome. These findings demonstrate the potential of P-ELNs as a promising oral therapeutic platform for liver cancer treatment.

The treatment outcomes of oral medications against ulcerative colitis (UC) have long been restricted by low drug accumulation in the colitis mucosa and subsequent unsatisfactory therapeutic efficacy. Here, high-performance pluronic F127 (P127)-modified gold shell (AuS)-polymeric core nanotherapeutics loading with curcumin (CUR) is constructed. Under near-infrared irradiation, the resultant P127-AuS@CURs generate transient mild photothermia (TMP; ≈42 °C, 10 min), which facilitates their penetration through colonic mucus and favors multiple cellular processes, including cell internalization, lysosomal escape, and controlled CUR release. This strategy relieves intracellular oxidative stress, improves wound healing, and reduces immune responses by polarizing the proinflammatory M1-type macrophages to the anti-inflammatory M2-type. Upon oral administration of hydrogel-encapsulating P127-AuS@CURs plus intestinal intralumen TMP, their therapeutic effects against acute and chronic UC are demonstrated to be superior to those of a widely used clinical drug, dexamethasone. The treatment of P127-AuS@CURs (+ TMP) elevates the proportions of beneficial bacteria (e.g., Lactobacillus and Lachnospiraceae), whose metabolites can also mitigate colitis symptoms by regulating genes associated with antioxidation, anti-inflammation, and wound healing. Overall, the intestinal intralumen TMP offers a promising approach to enhance the therapeutic outcomes of noninvasive medicines against UC., (© 2024 Wiley‐VCH GmbH.)

Aim: Despite some successful examples of therapeutic nanoparticles reaching clinical stages, there is still a significant need for novel formulations in order to improve the selectivity and efficacy of cancer treatment., Methods: The authors developed two novel dendrimer-gold (Au) complex-based nanoparticles using two different synthesis routes: complexation method (formulation A) and precipitation method (formulation B). Using a biomimetic cancer-on-a-chip model, the authors evaluated the possible cytotoxicity and internalization by colorectal cancer cells of dendrimer-Au complex-based nanoparticles., Results: The results showed promising capabilities of these nanoparticles for selectively targeting cancer cells and delivering drugs, particularly for the formulation A nanoparticles., Conclusion: This work highlights the potential of dendrimer-Au complex-based nanoparticles as a new strategy to improve the targeting of anticancer drugs.

Chitosan has been commonly used as an adhesive dressing material due to its excellent biocompatibility, degradability, and renewability. Tissue adhesives are outstanding among wound dressings because they can close the wound, absorb excess tissue exudate from the wound site, provide a moist environment, and act as a carrier for loading various bioactive molecules. They have been widely used in both preclinical and clinical treatment of skin wounds. This review summarizes recent research progresses in the application of chitosan and its derivatives for tissue adhesives. We also introduce their biomedical effects on wound adhesion, contamination isolation, antibacterial, immune regulation, and wound healing, and the strategies to achieve these functions when used as wound dressings. Finally, challenges and future perspectives of chitosan-based tissue adhesives are discussed for wound healing., Competing Interests: Declaration of competing interest The authors declared that they have no conflicts of interest to this work. We declare that we do not have any commercial or associative interest that represents a conflict of interest in connection with the work submitted., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Oral administration is the most preferred approach for treating colon diseases, and in situ vaccination has emerged as a promising cancer therapeutic strategy. However, the lack of effective drug delivery platforms hampered the application of in situ vaccination strategy in oral treatment of colorectal cancer (CRC). Here, we construct an oral core-shell nanomedicine by preparing a silk fibroin-based dual sonosensitizer (chlorin e6, Ce6)- and immunoadjuvant (imiquimod, R837)-loaded nanoparticle as the core, with its surface coated with plant-extracted lipids and pluronic F127 (p 127 ). The resultant nanomedicines (Ce6/R837@Lp 127 NPs) maintain stability during their passage through the gastrointestinal tract and exert improved locomotor activities under ultrasound irradiation, achieving efficient colonic mucus infiltration and specific tumor penetration. Thereafter, Ce6/R837@Lp 127 NPs induce immunogenic death of colorectal tumor cells by sonodynamic treatment, and the generated neoantigens in the presence of R837 serve as a potent in situ vaccine. By integrating with immune checkpoint blockades, the combined treatment modality inhibits orthotopic tumors, eradicates distant tumors, and modulates intestinal microbiota. As the first oral in situ vaccination, this work spotlights a robust oral nanoplatform for producing a personalized vaccine against CRC.

Effective communication between immune and bone-forming cells is crucial for the successful healing of bone defects. This study aimed to assess the potential of a decellularized placental sponge (DPS) as a coculture system for inducing M1/M2 polarization in macrophages and promoting osteogenic differentiation in adipose-derived mesenchymal stem cells (AD-MSCs), both in vitro and in vivo . We prepared the DPS and conducted a comprehensive characterization of its biomechanical properties, antibacterial activity, and biocompatibility. In vitro , we examined the influence of the DPS on the polarization of macrophages cocultured with AD-MSCs through nitric oxide assays, cytokine assays, phagocytosis tests, and real-time polymerase chain reaction (PCR). For in vivo assessment, we utilized micro-CT imaging, histological evaluations, and real-time PCR to determine the impact of the DPS seeded with Wharton's jelly mesenchymal stem cells (WJ-MSCs) on bone regeneration in a calvarial bone defect model. The coculture of AD-MSCs and macrophages on the DPS led to increased production of IL-10, upregulation of CD206, Arg1, and YM1 gene expression, and enhanced phagocytic capacity for apoptotic thymocytes. Concurrently, it reduced the secretion of TNF-α and nitric oxide (NO), downregulated the expression of CD86, NOS2, and IRF5 genes, and decreased macrophage phagocytosis of yeast. These results indicated polarization of macrophages toward an M2-like phenotype. In vivo , the presence of the DPS resulted in enhanced bone formation at the defect site. Immunostaining demonstrated that both the DPS and DPS + WJ-MSC constructs induced macrophage polarization toward an M2 phenotype, as compared to the control defect. In conclusion, this immunomodulatory effect, coupled with its biocompatibility and biomechanical properties resembling natural bone, positions the DPS as an attractive candidate for further exploration in the field of bone tissue engineering and regenerative medicine., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

There is a high demand from aging people for facial fillers with desirable biocompatibility and lasting filling effects to overcome facial depression. Novel injectable regenerated silk fibroin (RSF) microparticles were facilely printed from a glycidyl methacrylate-modified silk fibroin hydrogel to address this issue. The β-sheet content and mechanical properties of the RSF hydrogel can be simply modulated by the number of freeze-thawing cycles, and the swelling rate of the RSF hydrogel in saline was negligible. The printed RSF microparticles were uniform, and their diameter was about 300-500 μm, which could be adjusted by the pore sizes of the printed screens. After the injection with a 26-gauge needle, the size distribution of RSF microparticles had no noticeable variation, suggesting that the microparticles could bear the shear strain without breaking during the injection. The in vitro experiments demonstrated that RSF not only had desirable biocompatibility but also facilitated fibroblast migration. The subcutaneous injection experiments demonstrated that the RSF microparticles formed a lasting spot in the injected site. The tissue sections revealed that the RSF microparticles were still distinct on week 8, and blood vessels formed around the microparticles. These promising data demonstrate that the printed RSF microparticles have great potential for facial rejuvenation.

The clinical application of conventional medications for hepatocellular carcinoma treatment has been severely restricted by their adverse effects and unsatisfactory therapeutic effectiveness. Inspired by the concept of 'medicine food homology', we extracted and purified natural exosome-like lipid nanoparticles (LNPs) from black mulberry (Morus nigra L.) leaves. The obtained MLNPs possessed a desirable hydrodynamic particle size (162.1 nm), a uniform size distribution (polydispersity index = 0.025), and a negative surface charge (-26.6 mv). These natural LNPs were rich in glycolipids, functional proteins, and active small molecules (e.g., rutin and quercetin 3-O-glucoside). In vitro experiments revealed that MLNPs were preferentially internalized by liver tumor cell lines via galactose receptor-mediated endocytosis, increased intracellular oxidative stress, and triggered mitochondrial damage, resulting in suppressing the viability, migration, and invasion of these cells. Importantly, in vivo investigations suggested that oral MLNPs entered into the circulatory system mainly through the jejunum and colon, and they exhibited negligible adverse effects and superior anti-liver tumor outcomes through direct tumor killing and intestinal microbiota modulation. These findings collectively demonstrate the potential of MLNPs as a natural, safe, and robust nanomedicine for oral treatment of hepatocellular carcinoma., (© 2023. The Author(s).)

The clinical application of regenerated silk fibroin (RSF) films for wound treatment is restricted by its undesirable mechanical properties and lack of antibacterial activity. Herein, different pluronic polymers were introduced to optimize their mechanical properties and the RSF film with 2.5% pluronic F127 (RSF PF127 ) stood out to address the above issues owing to its satisfactory mechanical properties, hydrophilicity, and transmittance. Diverse antibacterial agents (curcumin, Ag nanoparticles, and antimicrobial peptide KR-12) were separately encapsulated in RSF PF127 to endow it with antibacterial activity. In vitro experiments revealed that the medicated RSF PF127 could persistently release drugs and had desirable bioactivities toward killing bacteria, promoting fibroblast adhesion, and modulating macrophage polarization. In vivo experiments revealed that medicated RSF PF127 not only eradicated methicillin-resistant Staphylococcus aureus in the wound area and inhibited inflammatory responses, but also facilitated angiogenesis and re-epithelialization, regardless of the types of antibacterial agents, thus accelerating the recovery of infected wounds. These results demonstrate that RSF PF127 is an ideal matrix platform to load different types of drugs for application as wound dressings.

During the wound tissue healing process, the relatively weak driving forces of tissue barriers and concentration gradients lead to a slow and inefficient penetration of bioactive substances into the wound area, consequently showing an impact on the effectiveness of deep wound healing. To overcome these challenges, we constructed biocompatible CaO 2 -Cu 2 O "micromotors". These micromotors reacted with the fluids at the wound site, releasing oxygen bubbles and propelling particles deep into the wound tissue. In vitro experimental results revealed that these micromotors not only exhibited antibacterial and hemostatic functions but also facilitated the migration of dermal fibroblasts and vascular endothelial cells, while modulating the inflammatory microenvironment. A methicillin-resistant Staphylococcus aureus infected full-thickness-wound model was created in rats, in which CaO 2 -Cu 2 O micromotors markedly expedited the wound healing process. Specifically, CaO 2 -Cu 2 O provided a sterile microenvironment for wounds and increased the amounts of M1-type macrophages during infection and inflammation. During the proliferation and remodeling stages, the amount of M1 macrophages gradually decreased, while the amount of M2 macrophages increased, and CaO 2 -Cu 2 O did not prolong the inflammatory period. Furthermore, the introduction of a regenerated silk fibroin (RSF) film on the wound surface successfully enhanced the therapeutic effects of CaO 2 -Cu 2 O against the infected wound. The combined application of oxygen-producing CaO 2 -Cu 2 O micromotors and a RSF film demonstrates significant therapeutic potential and emerges as a promising candidate for the treatment of infected wounds.

Background: Synthetic tissue engineering scaffolds has poor biocompatiblity with very low angiogenic properties. Conditioning the scaffolds with functional groups, coating with biological components, especially extracellular matrix (ECM), is an excellent strategy for improving their biomechanical and biological properties., Methods: In the current study, a composite of polycaprolactone and gelatin (PCL/Gel) was electrospun in the ratio of 70/30 and surface modified with 1% gelatin-coating (G-PCL/Gel) or plasma treatment (P-PCL/Gel). The surface modification was determined by SEM and ATR-FTIR spectroscopy, respectively. The scaffolds were cultured with fibroblast 3T3, then decellularized during freeze-thawing process to fabricate a fibroblast ECM-conditioned PCL/Gel scaffold (FC-PCL/Gel). The swelling and degaradtion as well as in vitro and in vivo biocompatibility and angiogenic properties of the scaffolds were evaluated., Results: The structure of the surface-modified G-PCL/Gel and P-PCL/Gel were unique and not changed compared with the PCL/Gel scaffolds. ATR-FTIR analysis admitted the formation of oxygen-containing groups, hydroxyl and carboxyl, on the surface of the P-PCL/Gel scaffold. The SEM micrographs and DAPI staining confirmed the cell attachment and the ECM deposition on the platform and successful removal of the cells after decellularization. P-PCL/Gel showed better cell attachment, ECM secretion and deposition after decellularization compared with G-PCL/Gel. The FC-PCL/Gel was considered as an optimized scaffold for further assays in this study. The FC-PCL/Gel showed increased hydrophilic behavior and cytobiocompatibility compared with P-PCL/Gel. The ECM on the FC-PCL/Gel scaffold showed a gradual degradation during 30 days of degradation time, as a small amount of ECM remained over the FC-PCL/Gel scaffold at day 30. The FC-PCL/Gel showed significant biocompatibility and improved angiogenic property compared with P-PCL/Gel when subcutaneously implanted in a mouse animal model for 7 and 28 days., Conclusions: Our findings suggest FC-PCL/Gel as an excellent biomimetic construct with high angiogenic properties. This bioengineered construct can serve as a possible application in our future pre-clinical and clinical studies for skin regeneration., (© 2022 International Center for Artificial Organs and Transplantation and Wiley Periodicals LLC.)

As an emerging technology, microneedles offer advantages such as painless administration, good biocompatibility, and ease of self-administration, so as to effectively treat various diseases, such as diabetes, wound repair, tumor treatment and so on. How to regulate the release behavior of loaded drugs in polymer microneedles is the core element of transdermal drug delivery. As an emerging on-demand drug-delivery technology, intelligent responsive microneedles can achieve local accurate release of drugs according to external stimuli or internal physiological environment changes. This review focuses on the research efforts in smart responsive polymer microneedles at home and abroad in recent years. It summarizes the response mechanisms based on various stimuli and their respective application scenarios. Utilizing innovative, responsive microneedle systems offers a convenient and precise targeted drug delivery method, holding significant research implications in transdermal drug administration. Safety and efficacy will remain the key areas of continuous efforts for research scholars in the future.

The treatment efficacies of conventional medications against colorectal cancer (CRC) are restricted by a low penetrative, hypoxic, and immunosuppressive tumor microenvironment. To address these restrictions, we developed an innovative antitumor platform that employs calcium overload-phototherapy using mitochondrial N770-conjugated mesoporous silica nanoparticles loaded with CaO 2 (CaO 2 -N770@MSNs). A loading level of 14.0 wt% for CaO 2 -N770@MSNs was measured, constituting an adequate therapeutic dosage. With the combination of oxygen generated from CaO 2 and hyperthermia under near-infrared irradiation, CaO 2 -N770@MSNs penetrated through the dense mucus, accumulated in the colorectal tumor tissues, and inhibited tumor cell growth through endoplasmic reticulum stress and mitochondrial damage. The combination of calcium overload and phototherapy revealed high therapeutic efficacy against orthotopic colorectal tumors, alleviated the immunosuppressive microenvironment, elevated the abundance of beneficial microorganisms (e.g., Lactobacillaceae and Lachnospiraceae), and decreased harmful microorganisms (e.g., Bacteroidaceae and Muribaculaceae). Moreover, together with immune checkpoint blocker (αPD-L1), these nanoparticles showed an ability to eradicate both orthotopic and distant tumors, while potentiating systemic antitumor immunity. This treatment platform (CaO 2 -N770@MSNs plus αPD-L1) open a new horizon of synergistic treatment against hypoxic CRC with high killing power and safety., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier Ltd.)

Current treatments for cancer, such as chemotherapy, radiotherapy, immunotherapy, and surgery, have positive results but are generally ineffective against metastatic tumors. Treatment effectiveness can be improved by employing bioengineered cancer traps, typically utilizing chemoattractant-loaded materials, to attract infiltrating cancer cells preventing their uncontrolled spread and potentially enabling eradication. However, the encapsulated chemical compounds can have adverse effects on other cells causing unwanted responses, and the generated gradients can evolve unpredictably. Here, we report the development of a cancer trap based on mechanical ratchet structures to capture metastatic cells. The traps use an array of asymmetric local features to mechanically attract cancer cells and direct their migration for prolonged periods. The trapping efficiency was found to be greater than isotropic or inverse anisotropic ratchet structures on either disseminating cancer cells and tumor spheroids. Importantly, the traps exhibited a reduced effectiveness when targeting non-metastatic and non-tumorigenic cells, underscoring their particular suitability for capturing highly invasive cancer cells. Overall, this original approach may have therapeutic implications for fighting cancer, and may also be used to control cell motility for other biological processes. STATEMENT OF SIGNIFICANCE: Current cancer treatments have limitations in treating metastatic tumors, where cancer cells can invade distant organs. Biomaterials loaded with chemoattractants can be implanted to attract and capture metastatic cells preventing uncontrolled spread. However, encapsulated chemical compounds can have adverse effects on other cells, and gradients can evolve unpredictably. This paper presents an original concept of "cancer traps" based on using mechanical ratchet-based structures to capture metastatic cancer cells, with greater trapping efficiency and stability than previously studied methods. This innovative approach has significant potential clinical implications for fighting cancer, particularly in treating metastatic tumors. Additionally, it could be applied to control cell motility for other biological processes, opening new possibilities for biomedicine and tissue engineering., Competing Interests: Declaration of Competing Interest The authors declare no conflict of interest., (Copyright © 2023 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Early cancer detection is still a major clinical challenge. The development of innovative and noninvasive screening approaches for the detection of predictive biomarkers indicating the stage of the disease could save many lives. Traditional in vitro and in vivo models are not adequate to copycat the native tumor microenvironment and for the discovery of new biomarkers. Recent advances in microfluidics, biosensors, and 3D cell biology speed up the development of micro-physiological bioengineered systems that improve the discovery of new potential cancer biomarkers. This can accelerate the individualization of cancer treatments leading to precision medicine-oriented approaches that could improve patient prognosis. For this reason, it is necessary to develop point-of-care diagnostic tools that can be user-friendly, miniaturized, and easily translated into clinical practice. This chapter describes how far this new generation of cutting-edge technologies, such as microfluidics, label-free detection systems, and molecular diagnostics, are from being applied in the current clinical practice., (© 2022. The Author(s), under exclusive license to Springer Nature Switzerland AG.)

Microfluidics and biosensors have already demonstrated their potential in cancer research. Typical applications of microfluidic devices include the realistic modeling of the tumor microenvironment for mechanistic investigations or the real-time monitoring/screening of drug efficacy. Similarly, point-of-care biosensing platforms are instrumental for the early detection of predictive biomarkers and their accurate quantification. The combination of both technologies offers unprecedented advantages for the management of the disease, with an enormous potential to contribute to improving patient prognosis. Despite their high performance, these methodologies are still encountering obstacles for being adopted by the healthcare market, such as a lack of standardization, reproducibility, or high technical complexity. Therefore, the cancer research community is demanding better tools capable of boosting the efficiency of cancer diagnosis and therapy. During the last years, innovative microfluidic and biosensing technologies, both individually and combined, have emerged to improve cancer theranostics. In this chapter, we discuss how these emerging-and in some cases unconventional-microfluidics and biosensor technologies, tools, and concepts can enhance the predictive power of point-of-care devices and the development of more efficient cancer therapies., (© 2022. The Author(s), under exclusive license to Springer Nature Switzerland AG.)

The tumor microenvironment (TME) is like the Referee of a soccer match who has constant eyes on the activity of all players, such as cells, acellular stroma components, and signaling molecules for the successful completion of the game, that is, tumorigenesis. The cooperation among all the "team members" determines the characteristics of tumor, such as the hypoxic and acidic niche, stiffer mechanical properties, or dilated vasculature. Like in soccer, each TME is different. This heterogeneity makes it challenging to fully understand the intratumor dynamics, particularly among different tumor subpopulations and their role in therapeutic response or resistance. Further, during metastasis, tumor cells can disseminate to a secondary organ, a critical event responsible for approximately 90% of the deaths in cancer patients. The recapitulation of the rapidly changing TME in the laboratory is crucial to improve patients' prognosis for unraveling key mechanisms of tumorigenesis and developing better drugs. Hence, in this chapter, we provide an overview of the characteristic features of the TME and how to model them, followed by a brief description of the limitations of existing in vitro platforms. Finally, various attempts at simulating the TME using microfluidic platforms are highlighted. The chapter ends with the concerns that need to be addressed for designing more realistic and predictive tumor-on-a-chip platforms., (© 2022. The Author(s), under exclusive license to Springer Nature Switzerland AG.)

Despite the significant amount of resources invested, cancer remains a considerable burden in our modern society and a leading cause of death. There is still a lack of knowledge about the mechanistic determinants of the disease, the mechanism of action of drugs, and the process of tumor relapse. Current methodologies to study all these events fail to provide accurate information, threatening the prognosis of cancer patients. This failure is due to the inadequate procedure in how tumorigenesis is studied and how drug discovery and screening are currently made. Traditionally, they both rely on seeding cells on static flat cultures and on the immunolabelling of cellular structures, which are usually limited in their ability to reproduce the complexity of the native cellular habitat and provide quantitative data. Similarly, more complex animal models are employed for-unsuccessfully-mimicking the human physiology and evaluating the etiology of the disease or the efficacy/toxicity of pharmacological compounds. Despite some breakthroughs and success obtained in understanding the disease and developing novel therapeutic approaches, cancer still kills millions of people worldwide, remaining a global healthcare problem with a high social and economic impact. There is a need for novel integrative methodologies and technologies capable of providing valuable readouts. In this regard, the combination of microfluidics technology with miniaturized biosensors offers unprecedented advantages to accelerate the development of drugs. This integrated technology have the potential to unravel the key pathophysiological processes of cancer progression and metastasis, overcoming the existing gap on in vitro predictive platforms and in vivo model systems. Herein, we discuss how this combination may boost the field of cancer theranostics and drug discovery/screening toward more precise devices with clinical relevance., (© 2022. The Author(s), under exclusive license to Springer Nature Switzerland AG.)

Gel is a class of self-supporting soft materials with applications in many fields. Fast, controllable gelation, micro/nano structure and suitable rheological properties are essential considerations for the design of gels for specific applications. Many methods can be used to control these parameters, among which the additive approach is convenient as it is a simple physical mixing process with significant advantages, such as avoidance of pH change and external energy fields (ultrasound, UV light and others). Although surfactants are widely used to control the formation of many materials, particularly nanomaterials, their effects on gelation are less known. This review summarizes the studies that utilized different surfactants to control the formation, structure, and properties of molecular and silk fibroin gels. The mechanisms of surfactants, which are interfacial and non-interfacial effects, are classified and discussed. Knowledge and technical gaps are identified, and perspectives for further research are outlined. This review is expected to inspire increasing research interest in using surfactants for designing/fabricating gels with desirable formation kinetics, structure, properties and functionalities., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

The therapeutic outcomes of conventional oral medications against ulcerative colitis (UC) are restricted by inefficient drug delivery to the colitis mucosa and weak capacity to modulate the inflammatory microenvironment. Herein, a fluorinated pluronic (FP127) was synthesized and employed to functionalize the surface of mulberry leaf-derived nanoparticles (MLNs) loading with resveratrol nanocrystals (RNs). The obtained FP127@RN-MLNs possessed exosome-like morphologies, desirable particle sizes (around 171.4 nm), and negatively charged surfaces (-14.8 mV). The introduction of FP127 to RN-MLNs greatly improved their stability in the colon and promoted their mucus infiltration and mucosal penetration capacities due to the unique fluorine effect. These MLNs could efficiently be internalized by colon epithelial cells and macrophages, reconstruct disrupted epithelial barriers, alleviate oxidative stress, provoke macrophage polarization to M2 phenotype, and down-regulate inflammatory responses. Importantly, in vivo studies based on chronic and acute UC mouse models demonstrated that oral administration of chitosan/alginate hydrogel-embedding FP127@RN-MLNs achieved substantially improved therapeutic efficacies compared with nonfluorinated MLNs and a first-line UC drug (dexamethasone), as evidenced by decreased colonic and systemic inflammation, integrated colonic tight junctions, and intestinal microbiota balance. This study brings new insights into the facile construction of a natural, versatile nanoplatform for oral treatment of UC without adverse effects., (Copyright © 2023 Wenjing Yang et al.)

The alarming increase in the number of breast cancer patients worldwide and the increasing death rate indicate that the traditional and current medicines are insufficient to fight against it. The onset of chemo- and radioresistances and cancer stem cell-based recurrence make this problem harder, and this hour needs a novel treatment approach. Competent nanoparticle-based accurate drug delivery and cancer nanotheranostics like photothermal therapy, photodynamic therapy, chemodynamic therapy, and sonodynamic therapy can be the key to solving this problem due to their unique characteristics. These innovative formulations can be a better cargo with fewer side effects than the standard chemotherapy and can eliminate the stability problems associated with cancer immunotherapy. The nanotheranostic systems can kill the tumor cells and the resistant breast cancer stem cells by novel mechanisms like local hyperthermia and reactive oxygen species and prevent tumor recurrence. These theranostic systems can also combine with chemotherapy or immunotherapy approaches. These combining approaches can be the future of anticancer therapy, especially to overcome the breast cancer stem cells mediated chemo- and radioresistances. This review paper discusses several novel theranostic systems and smart nanoparticles, their mechanism of action, and their modifications with time. It explains their relevance and market scope in the current era. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease., (© 2023 Wiley Periodicals LLC.)

To date, very limited work has been done on convenient and active control of insulin release. Herein, we report an electro-responsive insulin delivery system based on thiolated silk fibroin. The disulfide cross-linking points in TSF were reduced and broken to form sulfhydryl groups under electrification, which led to the increase of microneedle swelling degree and promoted insulin release. After power failure, the sulfhydryl group is oxidised to form disulfide bond crosslinking point again, resulting in the reduction of microneedle swelling degree and thus the reduction of release rate. The insulin loaded in the electro-responsive insulin delivery system showed good reversible electroresponsive release performance. The addition of graphene reduced the microneedle resistance and increased the drug release rate under current conditions. In vivo studies on type 1 diabetic mice show that electro-responsive insulin delivery system effectively controls the blood glucose before and after feeding by switching on and off the power supply, and this blood glucose control can be maintained within the safe range (100-200 mg/dL) for a long time (11h). Such electrically responsive delivery microneedles show potential for integration with glucose signal monitoring and are expected to build closed-loop insulin delivery systems., Competing Interests: Declaration of competing interest The authors declare no competing financial interest., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Polyacrylic acid (PAA) and its derivatives are commonly used as essential matrices in wound dressings, but their weak wet adhesion restricts the clinical application. To address this issue, a PAA-based coacervate hydrogel with strong wet adhesion capability is fabricated through a facile mixture of PAA copolymers with isoprenyl oxy poly(ethylene glycol) ether and tannic acid (TA). The poly(ethylene glycol) segments on PAA prevent the electrostatic repulsion among the ionized carboxyl groups and absorbed TA to form coacervates. The absorbed TA provides solid adhesion to dry and wet substrates via multifarious interactions, which endows the coacervate with an adhesive strength to skin of 23.4 kPa and 70% adhesion underwater. This coacervate achieves desirable self-healing and extensible properties suitable for frequently moving joints. These investigations prove that the coacervate has strong antibacterial activity, facilitates fibroblast migration, and modulates M1/M2 polarization of macrophages. In vivo hemorrhage experiments further confirm that the coacervate dramatically shortens the hemostatic time from hundreds to tens of seconds. In addition, full-thickness skin defect experiments demonstrate that the coacervate achieves the best therapeutic effect by significantly promoting collagen deposition, angiogenesis, and epithelialization. These results demonstrate that a PAA-based coacervate hydrogel is a promising wound dressing for medical translation., (© 2023 The Authors. Advanced Science published by Wiley-VCH GmbH.)

Microfluidic platforms represent a powerful approach to miniaturizing important characteristics of cancers, improving in vitro testing by increasing physiological relevance. Different tools can manipulate cells and materials at the microscale, but few offer the efficiency and versatility of light and optical technologies. Moreover, light-driven technologies englobe a broad toolbox for quantifying critical biological phenomena. Herein, the role of photonics in microfluidic 3D cancer modeling and biosensing from three major perspectives is reviewed. First, optical-driven technologies are looked upon, as these allow biomaterials and living cells to be manipulated with microsized precision and present opportunities to advance 3D microfluidic models by engineering cancer microenvironments' hallmarks, such as their architecture, cellular complexity, and vascularization. Second, the growing field of optofluidics is discussed, exploring how optical tools can directly interface microfluidic chips, enabling the extraction of relevant biological data, from single fluorescent signals to the complete 3D imaging of diseased cells within microchannels. Third, advances in optical cancer biosensing are reviewed, focusing on how light-matter interactions can detect biomarkers, rare circulating tumor cells, and cell-derived structures such as exosomes. Photonic technologies' current challenges and caveats in microfluidic 3D cancer models are overviewed, outlining future research avenues that may catapult the field., (© 2022 Wiley-VCH GmbH.)

Extracellular matrix (ECM)-based bioinks has attracted much attention in recent years for 3D printing of native-like tissue constructs. Due to organ unavailability, human placental ECM can be an alternative source for the construction of 3D print composite scaffolds for the treatment of deep wounds. In this study, we use different concentrations (1.5%, 3% and 5%w/v) of ECM derived from the placenta, sodium-alginate and gelatin to prepare a printable bioink biomimicking natural skin. The printed hydrogels' morphology, physical structure, mechanical behavior, biocompatibility, and angiogenic property are investigated. The optimized ECM (5%w/v) 3D printed scaffold is applied on full-thickness wounds created in a mouse model. Due to their unique native-like structure, the ECM-based scaffolds provide a non-cytotoxic microenvironment for cell adhesion, infiltration, angiogenesis, and proliferation. In contrast, they do not show any sign of immune response to the host. Notably, the biodegradation, swelling rate, mechanical property, cell adhesion and angiogenesis properties increase with the increase of ECM concentrations in the construct. The ECM 3D printed scaffold implanted into deep wounds increases granulation tissue formation, angiogenesis, and re-epithelialization due to the presence of ECM components in the construct, when compared with printed scaffold with no ECM and no treatment wound. Overall, our findings demonstrate that the 5% ECM 3D scaffold supports the best deep wound regeneration in vivo , produces a skin replacement with a cellular structure comparable to native skin., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2023 The Authors.)

Breast cancer is still the leading cause of women's death due to relapse and metastasis. In vitro tumor models are considered reliable tools for drug screening and understanding cancer-driving mechanisms due to the possibility of mimicking tumor heterogeneity. Herein, a 3D breast cancer model (3D-BCM) is developed based on enzymatically-crosslinked silk fibroin (eSF) hydrogels. Human MCF7 breast cancer cells are encapsulated into eSF hydrogels, with and without human mammary fibroblasts. The spontaneously occurring conformational change from random coil to β-sheet is correlated with increased eSF hydrogels' stiffness over time. Moreover, mechanical properties analysis confirms that the cells can modify the stiffness of the hydrogels, mimicking the microenvironment stiffening occurring in vivo. Fibroblasts support cancer cells growth and assembly in the eSF hydrogels up to 14 days of culture. Co-cultured 3D-BCM exhibits an upregulated expression of genes related to extracellular matrix remodeling and fibroblast activation. The 3D-BCM is subjected to doxorubicin and paclitaxel treatments, showing differential drug response. Overall, these results suggest that the co-culture of breast cancer cells and fibroblasts in eSF hydrogels allow the development of a mimetic in vitro platform to study cancer progression. This opens up new research avenues to investigate novel molecular targets for anti-cancer therapy., (© 2023 Wiley-VCH GmbH.)

The thymus coordinates the development and selection of T cells. It is structured into two main compartments: the cortex and the medulla. The replication of such complex 3D environment has been challenged by bioengineering approaches. Nevertheless, the effect of the scaffold microstructure on thymic epithelial cell (TEC) cultures has not been deeply investigated. Here, we developed bilayered porous silk fibroin scaffolds and tested their effect on TEC co-cultures. The small and large pore scaffolds presented a mean pore size of 84.33 ± 21.51 μm and 194.90 ± 61.38 μm, respectively. The highly porous bilayered scaffolds presented a high water absorption and water content (> 94 %), together with mechanical properties in the range of the native tissue. TEC (i.e., medullary (mTEC) and cortical (cTEC) cell lines) proliferation is increased in scaffolds with larger pores. The co-culture of both TEC lines in the bilayered porous silk scaffolds presents enhanced cell proliferation and metabolic activity when compared with mTEC in single culture. Also, when the co-culture occurred with cTEC in the small pores layer and mTEC in the large pores layer, a 9.2- and 18.9-fold increase in Foxn1 and Icam1 gene expression in cTEC is evident. These results suggest that scaffold microstructure and the co-culture influence TEC's behaviour. Bilayered silk scaffolds with adjusted microstructure are a valid alternative for TEC culture, having possible applications in advanced thymus bioengineering strategies., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)