Search

Antinutrients (ANs) interact with proteins changing its behavior and may affect Maillard reaction (MR). This work aimed to study the effect of phytic acid, tannic acid, and saponin on asparagine-glucose MR. The effect of AN concentration (0-1 mM) and reaction time (3-30 min at 150 °C) on the formation of melanoidins and acrylamide was determined. Other MR compounds were analyzed by gas chromatography and nuclear magnetic resonance. The ANs effect on asparagine-glucose thermal behavior was studied by differential scanning calorimetry. Results showed that ANs increase the melanoidins formation. Acrylamide content increased in saponin and phytic acid presence. The volatile profile was similar among the samples and formed mainly by pyrazines (>50%). ANs affect glucose's melting point, however, only phytic acid and saponin affect asparagine and glucose thermal behavior. The results presented in this work are important for food science and the industry to control MR in processed foods., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Plant-derived protein can present antinutrients (ANs) in its composition. The ANs can interact with the protein, affecting its solubility and functional properties, such as gelation. This work evaluated the effect of three ANs, namely phytic acid (PA), tannic acid (TA), and Quillaja bark saponin (QBS), on the gelation and solubility of soy (SPI), pea (PPI), and rice protein isolate (RPI). The ANs altered the protein isolates gelation and solubility. PA decreased the solubility and gelation of the three protein isolates at pH 3.0. The TA was the AN that most decreased the solubility and gelation characteristics of SPI and PPI at both pHs analyzed. QBS increased the gelation of SPI at pH 3.0 but decreased the final gel strength of RPI at the same pH. These results show that the knowledge of the presence of ANs in the protein isolates is of fundamental relevance for the processing of vegetable proteins., (© Association of Food Scientists & Technologists (India) 2020.)

Saponins are known for their bioactive and surfactant properties, showing applicability to the food, cosmetic and pharmaceutical industries. This work evaluated the saponins effects on Kluyveromyces lactis β-galactosidase activity and correlated these changes to the protein structure. Enzyme kinetic was evaluated by catalytic assay, protein structure was studied by circular dichroism and fluorescence, and isothermal titration calorimetry was used to evaluate the interactions forces. In vitro enzymatic activity assays indicated an increase in the protein activity due to the saponin-protein interaction. Circular dichroism shows that saponin changes the β-galactosidase secondary structure, favoring its protein-substrate interaction. Besides, changes in protein microenvironment due to the presence of saponin was observed by fluorescence spectroscopy. Isothermal titration calorimetry analyses suggested that saponins increased the affinity of β-galactosidase with the artificial substrate o-nitrophenyl-β-galactoside. The increase in the enzyme activity by saponins, demonstrated here, is important to new products development in food, cosmetic, and pharmaceutical industries., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Tannins, proteins, and divalent cations interactions are important for many processes in the food industry and human and animal nutrition and health. The effect of magnesium, calcium, and manganese on the interaction, turbidity, and in vitro protein digestibility of bovine serum albumin and tannic acid complexes was studied. The divalent cations increase the affinity and influence the enthalpy and entropy changes of the protein and tannin binding. Magnesium maintained the nature of interactions, and calcium and manganese changed the binding mechanism. The factor that most influenced turbidity was the tannic acid and divalent cations binary interaction. Samples containing tannic acid and magnesium and calcium decreased the protein digestibility. Manganese increased the in vitro protein digestibility when compared with samples without salt addition; nevertheless, the complexes formed was higher. These finds can help in the understanding of interactions involved food system and in physiological conditions., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Tannins are compounds with antinutrient properties that hinder food digestibility, prejudicing human and animal nutrition. This work aimed to evaluate the negative effects of tannic acid on Kluyveromyces lactis β-galactosidase catalytic activity and correlate these changes with the protein structure. β-Galactosidase activity decreased in the presence of tannins, which caused changes to the structure of the enzyme, as demonstrated by circular dichroism. It was verified that tannin binds to the protein by a static mechanism. Additionally, isothermal titration calorimetry suggested that tannic acid modified the molecular interaction between β-galactosidase and o-nitrophenyl-β-d-galactoside, reducing their affinity and prejudicing the protein activity. This study helps to understand the effects of tannins on the β-galactosidase structure and how they are related to the enzyme catalytic activity. The alterations in the conformation and activity of the enzyme should be taken into consideration when dairy products are consumed with tannin-rich food., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Phytate decreases mineral and protein availability and influences protein properties, such as solubility and stability. The binding constants and turbidity data can help with the understanding of the influence of phytate and divalent salts on protein behavior. Ternary complexes formed between bovine serum albumin, sodium phytate, and divalent salts were investigated by isothermal titration calorimetry, turbidity, and in vitro protein digestibility. Results showed a positive entropy change and a negative and small enthalpy change as a result of electrostatic binding forces and ternary and binary complex precipitation. The interaction was favored for the systems containing calcium and manganese, whereas those containing magnesium showed a low heat of interaction. Despite the high protein digestibility, the stability of divalent phytates in a wide pH range may decrease mineral bioavailability. These results can provide important insights for the study of mineral bioavailability and diverse processes that involve protein and minerals in several areas of knowledge.

Bioavailability of food nutrients can be reduced in the presence of antinutrients such as phytates and tannins. This work aimed to study bovine serum albumin binding to phytic acid and tannic acid, and its influence on in vitro protein digestibility. The effect of autoclaving and boiling on protein digestibility and the microstructure of complexes was also evaluated. Results showed that high ionic strength promotes greater affinity between tannic acid and bovine serum albumin, and decreases in vitro protein digestibility. For phytic acid and bovine serum albumin, the opposite behavior is observed because interactions are governed by electrostatic forces. A rise in temperature above that causing denaturation of the protein favors its interaction with phytic acid, and disfavors that with tannic acid, probably due to different protein binding site exposure. For both antinutrients, heating treatment increased protein hydrolysis, the size of complexes and their fragility., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

This work aimed to study the influence of pH (3.5 and 7.0) and CaCl 2 and MgCl 2 addition on heat-set gelation of a quinoa protein isolate at 10% and 15% (w/w). The protein isolate obtained was composed mainly of 11S globulin as was observed by electrophoresis and mass spectrometry analysis. Heat-set gelation occurred at both pH values studied. Nevertheless, the gels formed at pH 3.5 were more viscoelastic and denser than those formed at pH 7.0, that was coarser and presented syneresis. The CaCl 2 and MgCl 2 addition increased the gel strength during rheological analysis at pH 3.5, possibly due to the formation of fiber-like connections in the gel network. At pH 7.0, the divalent salts resulted in weaker gels formed by agglomerates, suggesting a neutralization of the protein surface charges. The differences in quinoa protein gelation were attributed to solubility, and the flexibility of proteins secondary structure at the pH studied., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

The impact of heat treatment, pH and phytic acid (PA) concentration on the aggregation behavior and digestibility of whey protein isolate (WPI) was investigated. The experimental results indicated that below the isoelectric point of WPI, heat treatment and elevated PA levels significantly increased turbidity and particle size, leading to the aggregation of WPI molecules. No new chemical bonds were formed and the thermodynamic parameters ΔH < 0, ΔS > 0 and ΔG < 0 suggested that the interaction between PA and WPI was primarily a spontaneous electrostatic interaction driven by enthalpy. After the small intestine stage, increasing phytic acid levels resulted in a significant decrease in hydrolysis degree from 16.2 ± 1.5% (PA0) to 10.9 ± 1.4% (0.5% PA). Conversely, above isoelectric point of WPI, there was no significant correlation between the presence of PA and the aggregation behavior or digestion characteristics of WPI. These results were attributed to steric hindrance caused by PA-WPI condensates, which prevented protease binding to hydrolysis sites on WPI. In summary, the effect of PA on protein aggregation behavior and digestive characteristics was not simply dependent on its presence but largely on the aggregation degree of PA-WPI induced by heat treatment, pH and PA concentration. The findings obtained here suggested that phytic acid may be utilized as an agent to modulate the digestion characteristics of proteins according to production requirements. Additionally, the agglomerates formed by heating phytic acid and protein below the isoelectric point could also be utilized for nutrient delivery. [ABSTRACT FROM AUTHOR]

Copyright of Science & Technology of Food Industry is the property of Science & Technology of Food Industry Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Molecular reactions occur through functional groups that drive covalent synthesis. These reactions often proceed via catalytic processes, leading to the formation of time crystals, which can be integrated into shared molecules or reactions—a concept referred to as the time crystal synthon. The concept of time crystal synthons, introduced by Sahoo, pushes these ideas into the temporal realm, where molecular assemblies exhibit periodic behavior over time. This temporal aspect allows the creation of materials with unique functionalities, such as enhanced stability and responsiveness to external stimuli. A molecular synthon generates a specifically designed molecule within a catalytic reaction cycle or a time crystal. If this molecule or any associated reaction steps can be transferred or shared with a neighboring time crystal to facilitate their integration, it can be identified as a time crystal synthon. Supramolecular synthons, in contrast, enable the assembly of complex structures through non-covalent interactions among the molecules, playing a crucial role in crystal engineering. This paper further explores the applications of these synthons in various domains, including supramolecular architecture design, the integration of time crystal cycles, and the development of advanced materials. By mastering these interconnected synthons, scientists can gain greater control over molecular and material properties, driving advances in nanotechnology, materials science, and beyond. This paper explores the interconnected paradigms of molecular, supramolecular, and time crystal synthons within their respective engineering fields. Molecular synthons are foundational units within molecules, essential for designing and synthesizing new compounds with targeted properties. [ABSTRACT FROM AUTHOR]

Copyright of China Condiment is the property of China Condiment and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Ara h1 was the highest content of peanut allergen protein, identified as a biomarker of peanut allergen. In this study, Ara h1 was covalently complexed with caffeic acid (CA) to research the effects of covalent conjugation on the antigenicity and protein structural properties of Ara h1. After the covalent complexing of Ara h1 and CA, the IgG‐binding capacity of Ara h1 was reduced compared with that of control Ara h1. Moreover, the structure of Ara h1 changed from ordered to disordered, the number of intermolecular hydrogen bonds decreased, and some hydrophobic groups were exposed or hydrophobic peptides were released. The carboxyl group in CA reacted with the amino group in Ara h1. The digestibility of Ara h1–CA was increased. The antigenicity of Ara h1–CA was undetectable after 30 min of digestion in vitro. These findings can serve as a reference for further research on hypoallergenic peanut products. [ABSTRACT FROM AUTHOR]

Copyright of Science & Technology of Food Industry is the property of Science & Technology of Food Industry Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Nanocomplexes, which possess immense potential to function as nanovehicles, can link diverse ligand compounds. The objective of the present study was to design and characterize resveratrol (RSV)- and tocopherol (TOC)-loaded 11S quinoa seed protein nanocomplexes. Firstly, molecular docking was performed to describe the probable binding sites between protein and ligands, and binding energies of −5.6 and −6.2 kcal/mol were found for RSV and TOC, respectively. Isothermal titration calorimetry allowed us to obtain the thermodynamic parameters that described the molecular interactions between RSV or TOC with the protein, finding the complexation process to be exothermic and spontaneous. 11S globulin intrinsic fluorescence spectra showed quenching effects exerted by RSV and TOC, demonstrating protein–bioactive compound interactions. The application of Stern–Volmer, Scatchard, and Förster resonance energy transfer models confirmed static quenching and allowed us to obtain parameters that described the 11S-RSV and 11S-TOC complexation processes. RSV has a higher tendency to bind 11S globulin according to ITC and fluorescence analysis. Secondly, the protein aggregation induced by bioactive compound interactions was confirmed by dynamic light scattering and atomic force microscopy, with diameters <150 nm detected by both techniques. Finally, it was found that the antioxidant capacity of a single 11S globulin did not decrease; meanwhile, it was additive for 11S-RSV. These nanocomplexes could constitute a real platform for the design of nutraceutical products. [ABSTRACT FROM AUTHOR]

This review presents a comparative analysis of gelation properties in plant-based versus animal-based proteins, emphasizing key factors such as pH, ionic environment, temperature, and anti-nutritional factors. Gelation, a crucial process in food texture formation, is influenced by these factors in varying ways for plant and animal proteins. Animal proteins, like casein, whey, meat, and egg, generally show stable gelation properties, responding predictably to pH, temperature, and ionic changes. In contrast, plant proteins such as soy, pea, wheat, and oilseed show more variable gelation, often requiring specific conditions, like the presence of NaCl or optimal pH, to form effective gels. Animal proteins tend to gel more reliably, while plant proteins require precise environmental adjustments for similar results. Understanding these factors is crucial for selecting and processing proteins to achieve desired textures and functionalities in food products. This review highlights how changing these key factors can optimize gel properties in both plant- and animal-based proteins. [ABSTRACT FROM AUTHOR]

The elucidation of the interaction mechanism between phospholipids and milk proteins within emulsions is pivotal for comprehending the properties of infant formula fat globules. In this study, multispectral methods and molecular docking were employed to explore the relationship between phosphatidylcholine (PC) and whey protein isolate (WPI). Observations indicate that the binding constant, alongside thermodynamic parameters, diminishes as temperature ascends, hinting at a predominantly static quenching mechanism. Predominantly, van der Waals forces and hydrogen bonds constitute the core interactions between WPI and PC. This assertion is further substantiated by Fourier transform infrared spectroscopy, which verifies PC's influence on WPI's secondary structure. A detailed assessment of thermodynamic parameters coupled with molecular docking reveals that PC predominantly adheres to specific sites within α‐lactalbumin, β‐lactoglobulin, and bovine serum albumin, propelled by a synergy of hydrophobic interactions, hydrogen bonding, and van der Waals forces, with binding energies noted at −5.59, −6.71, and −7.85 kcal/mol, respectively. An increment in PC concentration is observed to amplify the emulsification properties of WPI whilst concurrently diminishing the zeta potential. This study establishes a theoretical foundation for applying the PC–WPI interaction mechanism in food. [ABSTRACT FROM AUTHOR]

This study explored the mechanism of l‐lysine intervention in wheat gluten protein (WG) gel formation under a microwave (MW) field. The results showed that the MW treatment had higher ζ‐potential values at the same heating rate. After adding l‐lysine, the solution conductivity and dielectric loss were significantly increased. Moreover, the WG gel strength enhanced 4.40% under the MW treatment. The Fourier spectra showed that the α‐helix content was decreased 13.78% with the addition of lysine. The ultraviolet absorption spectra and fluorescence spectra indicated that MW irradiation impacted the interactions between WG molecules more effectively than the water bath heating, promoting the denaturation and unfolding of the protein structure. In addition, scanning electron microscopy analysis showed that the incorporation of lysine promoted an ordered network structure formation of the protein, which enhanced the gel properties. This indicated that the zwitterion of l‐lysine played a regulatory role in the aggregation of proteins in the MW field. [ABSTRACT FROM AUTHOR]

Copyright of Shipin Kexue/ Food Science is the property of Food Science Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Shipin Kexue/ Food Science is the property of Food Science Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Oxyresveratrol (ORV) is naturally found in Artocapus lakoocha Roxb. (AL), similar to resveratrol. This AL extract has demonstrated considerable importance in dietary supplements and cosmetics for its anti-tyrosinase and antioxidant properties. There is a great demand for ORV in the cosmetic and pharmaceutical industries. Traditionally, harsh solvents have been used to extract ORV from AL. This study aims to address this issue by introducing green technology with a ready-to-use extract for the enrichment of ORV extraction from AL using deep eutectic solvents (DESs). Thirty-three DESs were synthesized and characterized. The extraction efficiency of these DESs was evaluated by ORV content (g ORV/kg dried plant) and compared with the conventional solvents, analyzed by validated HPLC. Notably, two synthesized DESs, namely choline chloride/citric acid/water (2:1:3) (DES10) and choline chloride/xylose (1:1) (DES17), showed higher ORV content than the conventional solvents and were therefore selected for optimization of extraction conditions using Box–Behnken designs, considering three variable levels: time, temperature, and water as co-solvents. Interestingly, the biological activities of ORV-enriched extracts from DES10 and DES17 were evaluated, and the results showed that they were 74-fold and 252-fold more potent than kojic acid in terms of tyrosinase inhibitory activity. DES17 was 17-fold more potent antioxidants than ascorbic acid. The morphology of AL powder before and after extraction with DESs under SEM suggested that DESs have the same mechanism as classical organic solvents. These ORV-enriched extracts can be directly incorporated into cosmetic formulations and production scales without the need to prepare a stock solution and are therefore referred to as ready-to-use extracts. This study successfully pioneered the use of DESs for environmentally friendly and highly efficient ORV extraction from AL to produce ready-to-use extracts and applications for the pharmaceutical and cosmetic industries. [ABSTRACT FROM AUTHOR]

Background: Kenaf seeds are a rich source of protein; however, finding the best extraction method is crucial to obtaining high-quality protein from these underutilized seeds. This research devised an optimized extraction process for best recovery of kenaf seeds protein using response surface methodology. The key parameters affecting the yield and protein content were optimized, including extraction pH (2-11), seed:water ratio (5:1-50:1), temperature (30-90 °C), and duration (20-360 min). The physicochemical and techno-functional properties of kenaf seed protein isolates (KSPIs) were examined., Results: A maximum protein yield of 12.05 g/100 g with purity level 91.94 g/100 g was obtained using an optimized extraction with pH 11.0, seed:water ratio 50:1, 360 min duration, and temperature 50 °C. The oil and water retention capacities of KSPI were 1.14 mL g -1 and 1.37 mL g -1 respectively. After 30 min at pH 7, KSPIs demonstrated remarkable emulsion capacity (83.12%) and stability (75.63%), along with high foaming capacity (106%) and stability (18.3%). As per high-performance liquid chromatography analysis, arginine, glutamic acid, leucine, phenylalanine, and lysine were the most abundant amino acids detected in KPSIs. The KSPIs' globular protein structure was successfully verified using analytical approaches, including Fourier transform infrared spectroscopy, protein fraction ratios, and differential scanning calorimetry. Sodium dodecyl sulfate polyacrylamide gel electrophoresis analysis revealed that KPSI has a molecular weight distribution ranging from 10 kDa to 50 kDa., Conclusion: The results of this study support the application of the proposed response-surface-methodology-optimized extraction method for efficient recovery of high-quality kenaf seed proteins that meet the necessary physicochemical and techno-functional requirements. © 2024 Society of Chemical Industry., (© 2024 Society of Chemical Industry.)

Soft-packed ready-to-eat (RTE) shrimp has gradually become popular with consumers due to its portability and deliciousness. However, the browning caused by high-temperature sterilization is a non-negligible disadvantage affecting sensory quality. RTE shrimp is processed through "boiling + vacuum soft packing + high temperature and pressure sterilization". Ultraviolet-visible (UV) spectroscopy with CIELAB color measurement showed that phytic acid (PA) + lactic acid (LA), PA + citric acid (CA), and PA + LA + CA soaking before cooking alleviated browning, as well as UVabsorbance and the browning index (BI). Meanwhile, UV spectroscopy and fluorescence spectroscopy showed that organic acid soaking reduced the content of carbonyl, dityrosine, disulfide bonds, surface hydrophobicity, and protein solubility, but promoted the content of free sulfhydryl and protein aggregation. However, in vitro digestion simulations showed that organic acid soaking unexpectedly inhibited the degree of hydrolysis and protein digestibility. This study provides the basis for the application of organic acids as color protectors for RTE aquatic muscle product. [ABSTRACT FROM AUTHOR]

The binding process between three species of chromium and serum albumin (SA) was investigated, as well as the interaction between K2Cr2O7 and bovine serum albumin (BSA) under coexistence of different chromium forms. CrCl3, K2Cr2O7 and Crpic bound to SA spontaneously through Van der Waals force, and their binding constants were 103–104 M−1 at 298 K, respectively. K2Cr2O7 and Crpic both had strong binding affinity for BSA, and significantly affected the secondary structure of BSA and the microenvironment surrounding amino acid residues. Chromium exhibited a greater fluorescence quenching constant towards HSA than toward BSA, and K2Cr2O7 induced greater conformational changes in human serum albumin (HSA) than in BSA. A weak binding of CrCl3 to BSA had no significant effect on the binding affinity of K2Cr2O7 to BSA. K2Cr2O7 and BSA have a greater binding affinity when coexisting with Crpic, and K2Cr2O7 induces a greater conformational change in BSA. [ABSTRACT FROM AUTHOR]

Copyright of Çukurova Journal of Agriculture & Food Sciences is the property of Cukurova University and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Melanoidins, as macromolecular heterogeneous organic polymers, are produced from the Maillard reaction between amino and carbonyl groups during the thermal hydrolysis pretreatment (THP) of sludge. The brown color and recalcitrance of melanoidins pose a serious threat to wastewater treatment systems, such as invalidating UV disinfection and decreasing the efficiency of anaerobic digestion; thus, they have gradually received much concern in recent years. However, currently the study on THP-origin melanoidins is limited by a lack of reliable extraction and quantification methods. This paper presents a comprehensive review of the physical, chemical, and biological properties of melanoidins from different sources to fill the research gap on THP-origin melanoidins. The adverse effects of melanoidins on the management of wastewater and sludge are discussed, and for the first time, special attention is paid to the potential environmental hazards of THP-origin melanoidins to natural ecosystems. The removal technologies of melanoidins are summarized and compared as well. Finally, the suggested areas that future studies should focus on are provided. This review is dedicated to providing guidance on melanoidin research and management for the better development of the THP industry. [ABSTRACT FROM AUTHOR]

This work aimed to evaluate α-amylase activity and structure in the presence of Curcuma longa L. extracts obtained with deep eutectic solvent (DES) and curcumin. Isothermal titration calorimetry (ITC), fluorescence, circular dichroism (CD), and molecular docking were applied to study the effect of additives on enzyme activity and structure. Results showed that in the presence of turmeric extracts, there was a lower catalytic rate. Through the ITC analysis, a lower reaction rate was noticed, related to the inhibition of the enzymatic activity, both in the presence of the extract and of curcumin. The turmeric extracts interacted with the enzyme by a static mechanism as demonstrated by fluorescence. CD showed an increase in negative bands characteristic of hydrophobic interactions between the enzyme and the samples, which probably difficult the access of substrate to the enzyme's active site. Molecular docking showed that curcumin is capable to interact with the active site of α-amylase confirming results obtained by other techniques. Results presented in this work show the turmeric extracts potential for α-amylase inhibition which may be of interest to the pharmaceutical and food industry. [ABSTRACT FROM AUTHOR]

Different pre-treatments of pulses affect the content of antinutritional factors and protein digestibility. This study addresses the challenge of removing phytic acid, which is one of the major anti-nutritional factors present in faba beans. From this study, fluidized bed drying at 120 °C and 140 °C removed 8–22% of the phytic acid present. Phytic acid is thermally stable, and drying did not lead to a large reduction in concentration. Greater drying temperatures and drying times had little effect on the removal of phytic acid. Soaking the dehulled faba beans in 0.1% citric acid for 12 h at 37 °C removed 51 ± 11% of the phytic acid. After soaking for 12 h, microwaving the faba beans for two minutes removed over 70% of the phytic acid, including soaking in water or soaking in 0.1% citric acid solution. The mechanism for phytic acid reduction after microwaving appears to be linked with changes in the cotyledon cellular structure of the faba bean, as demonstrated using scanning electron microscopy. The protein secondary structure in the faba bean was modified after microwaving. The in vitro protein digestibility of dehulled faba beans used in this study increased by 15.7% compared with the fresh faba beans of 75.5 ± 0.5%. The in vitro digestibility of dehulled faba beans increased to 88.3 ± 0.6% after two minutes of microwaving, so both dehulling and microwaving improved the digestibility of the faba bean proteins. [ABSTRACT FROM AUTHOR]

In this study, the noncovalent interaction mechanisms between soybean 7S globulin and three polyphenols (gallic acid (GA), chlorogenic acid (CA) and (−)-epigallocatechin gallate (EGCG)) were explored and compared using various techniques. Fluorescence experiments showed that GA and EGCG had strong static quenching effects on 7S fluorescence, and that of CA was the result of multiple mechanisms. The interactions caused changes to the secondary and tertiary structure of 7S, and the surface hydrophobicity was decreased. Thermodynamic experiments showed that the combinations of polyphenols with 7S were exothermic processes. Hydrogen bonds and van der Waals forces were the primary driving forces promoting the binding of EGCG and CA to 7S. The combination of GA was mainly affected by electrostatic interaction. The results showed that the structure and molecular weight of polyphenols play an important role in their interactions. This work is helpful for developing products containing polyphenols and soybean protein. [ABSTRACT FROM AUTHOR]

BACKGROUND: Quinoa protein is enriched with a wide range of amino acids, including all nine essential amino acids necessary for the human body, and in appropriate proportions. However, as the main ingredient of gluten‐free food, it is difficult for quinoa to form a certain network structure for lack of gluten protein. The aim of this work was to enhance the gel properties of quinoa protein. Therefore, the texture characteristics of quinoa protein treated with different ultrasound intensities coupled with transglutaminase (TGase) were investigated. RESULTS: The gel strength of quinoa protein gel increased markedly by 94.12% with 600 W ultrasonic treatment, and the water holding capacity increased from 56.6% to 68.33%. The gel solubility was reduced and free amino content increased the apparent viscosity and the consistency index. Changes in the free sulfhydryl group and hydrophobicity indicated that ultrasound stretched protein molecules and exposed active sites. The enhanced intrinsic fluorescence intensity at 600 W demonstrated that ultrasonic treatment affected the conformation of quinoa protein. New bands emerged in sodium dodecylsulfate–polyacrylamide gel electrophoresis indicating that high‐molecular‐weight polymers were generated through TGase‐mediated isopeptide bonds. Furthermore, scanning electron microscopy showed that the gel network structure of TGase‐catalyzed quinoa protein was more uniform and denser, thereby improving the gel quality of quinoa protein. CONCLUSION: The results suggested that high‐intensity ultrasound combined with TGase would be an effective way to develop higher‐quality quinoa protein gel. © 2023 Society of Chemical Industry. [ABSTRACT FROM AUTHOR]

Copyright of Shipin Kexue/ Food Science is the property of Food Science Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Simple Summary: Peroxidase (PO) is effective at mitigating or eliminating mycotoxins in fish feeds. However, the literature does not describe how the free radicals produced during oxidation by PO can interact with other nutrients and active compounds present in such feeds, affecting their bioavailability and modifying both the metabolism of the species and the quality of the final product. The objective of this study was to evaluate the impact of using PO as a treatment against mycotoxins on the nutritional quality of the fatty acids and polyphenols present in a fish feed. The results demonstrate that applying PO may have unwanted side effects on long-chain polyunsaturated fatty acids and the digestive bioaccessibility of polyphenols. Peroxidase (PO) has been applied in different areas of industrial biotechnology, including the control of contaminants like aflatoxin B1 in fish feeds. However, its potential negative interactions with the macro and micro components of feeds have not been evaluated. The aim of this study was to evaluate the impact of PO's addition to a feed on compounds like fatty acids and polyphenols using an in vitro simulation of the digestive tract of the tilapia. The influence on fatty acids was determined by changes in the peroxide index, with the feed including PO presenting values four times higher than those of the control feed. On the other hand, the in vitro digestive simulation also evidenced an effect of PO on the bioaccessibility of polyphenols significantly influenced by the total digestion time and temperature. The bioaccessibility of polyphenol ranged from 2.09 to 16.23 μmol of the total Trolox equivalent antioxidant capacity for the combinations evaluated in the study. The greatest bioaccessibility was observed at the central point under the following conditions of digestive hydrolysis: pH of 7, 30 °C, 4.5 h of digestive hydrolysis and an absence of PO. [ABSTRACT FROM AUTHOR]

There have been significant advances in the formulation and stabilization of proteins in the liquid state over the past years since our previous review. Our mechanistic understanding of protein-excipient interactions has increased, allowing one to develop formulations in a more rational fashion. The field has moved towards more complex and challenging formulations, such as high concentration formulations to allow for subcutaneous administration and co-formulation. While much of the published work has focused on mAbs, the principles appear to apply to any therapeutic protein, although mAbs clearly have some distinctive features. In this review, we first discuss chemical degradation reactions. This is followed by a section on physical instability issues. Then, more specific topics are addressed: instability induced by interactions with interfaces, predictive methods for physical stability and interplay between chemical and physical instability. The final parts are devoted to discussions how all the above impacts (co-)formulation strategies, in particular for high protein concentration solutions.', (© 2024. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Background: Soymilk is a high-quality source of protein and minerals, such as calcium (Ca), iron (Fe), and zinc (Zn). However, phytic acid in soymilk restricts mineral and protein availability. We here investigated the effects of removing phytic acid on the physicochemical properties, mineral (Ca, Fe, and Zn) bioaccessibility, and protein digestibility of soymilk., Results: Physicochemical property analysis revealed that the removal of phytic acid reduced protein accumulation at the gastric stage, thereby facilitating soymilk matrix digestion. The removal of phytic acid significantly increased Zn bioaccessibility by 18.19% in low-protein soymilk and Ca and Fe bioaccessibility by 31.20% and 30.03%, respectively, in high-protein soymilk., Conclusion: Removing phytic acid was beneficial for the hydrolysis of high-molecular-weight proteins and increased the soluble protein content in soymilk, which was conducive to protein digestion. This study offers a feasible guide for developing plant-based milk with high nutrient bioaccessibility. © 2024 Society of Chemical Industry., (© 2024 Society of Chemical Industry.)

In this study, the effects of soy protein isolate (SPI) concentration (0%, 50%, and 100%), sonication time (10, 20, and 30 min), and whipping time (5, 10, and 15 min) on the quality characteristics of the model food foam were investigated and optimized. In order to maximize both foaming capacity (FC) and foam stability (FS), it was aimed to select the optimum process parameters using a Taguchi‐based fuzzy logic method (TBFLM). The experiments were performed according to Taguchi L9 (33) orthogonal design, and the effects of process parameters on foam quality characteristics were investigated by analysis of variance. Optimization results revealed that optimum FC and FS values were obtained with 50% SPI, 30 min sonication, and 10 min whipping. SPI concentration was the most effective factor for the responses in Taguchi single‐response optimization. However, the whipping time has the greatest impact on the multiperformance characteristics index, accounting for 78.93% of the contribution to fuzzy logic multiresponse optimization. The verification experiments revealed that the TBFLM is a useful method for improving foam quality characteristics. Practical applications: FC and FS are the most important properties, which represent the quality characteristics of model food foams. The Taguchi method failed in multiresponse optimization in the model food application. A Taguchi‐based Fuzzy logic optimization method was successfully applied to optimize the quality characteristics of model food foam, and the optimal conditions were determined as soy protein isolate of 50%, sonication time of 30 min, and whipping time of 10 min. The contribution of whipping time to the multiperformance characteristics index was found to be the highest. [ABSTRACT FROM AUTHOR]

Kargil is a cold desert with hostile ecological conditions such as low temperature and precipitation, as well as difficult terrains. However, several wild mushrooms thrive well under such an extreme environment. Despite their abundance, the chemical composition of indigenous mushrooms has not been explored. This study aimed to assess the potential of two wild edible mushrooms from Kargil, Lactarius drassinus and Lactarius controversus, as food supplements by evaluating their nutritional and nutraceutical properties. Nutritional attributes such as total protein, available carbohydrates, soluble sugars, and vitamins were found to be high in the mushroom species. Furthermore, high mineral accumulation and relatively lower antinutrient concentrations resulted in higher bioavailabilities of Zn, Fe, Ca, and Mg. Gas-chromatography–mass-spectrometry-based metabolite profiling revealed that although the two mushroom species showed similar metabolite compositions, their relative concentrations differed. Sugars were the predominant compounds identified in both the species, with sugar alcohols being the major contributor. The second most abundant class of compound in L. drassinus was amino acids, with 5-oxoproline as the major contributor. On the other hand, fatty acids were the second most abundant compounds in L. controversus, with high oleic and linoleic acid concentrations. In the ultra-performance-liquid-chromatography-based quantification of phenolic compounds, chlorogenic acid was found to be highest in in terms of its concentration in both the mushrooms studied, followed by quercetin dihydrate and gallic acid in L. drassinus and L. controversus, respectively. Moreover, high antioxidant activities attributable to their high phenol, flavonoid, and carotenoid concentrations were observed. Overall, the two mushrooms offer well-balanced sources of nutritional and nutraceutical compounds, making them healthy foods. [ABSTRACT FROM AUTHOR]

Chemical flooding is a beneficial approach to enhance oil recovery from hydrocarbon reservoirs. Surfactant flooding due to the capability of oil/water interfacial tension (IFT) reduction is a very well-known approach. However, the adsorption of surfactants on the rocks' surface makes this approach less feasible and too complex to model. This study attempts to analyze the adsorption behavior of saponin on sandstone rocks. Saponin is a natural surfactant found in more than 500 plant species. The adsorption behavior of this surfactant follows the Langmuir isotherm model with a negligible error of 0.98%. Experimental studies revealed that saponin adsorption capacity decreases when the temperature rises, but the behavior still follows the Langmuir isotherm model in elevated temperatures. Furthermore, the effect of particle size on adsorption behavior was also investigated experimentally, whereas smaller particles were found to provide higher adsorption capacities for saponin molecules. In the current research, a model based on thermodynamic equations has been constructed capable of predicting the adsorption behavior of saponin on sandstone rocks in extended conditions. Experimental data were also employed to verify the model performance. Moreover, the core plug and batch adsorption capacities were compared to each other, which showed that the core adsorption capacity is much lower than the batch condition. Comparing results achieved in this study with other natural surfactants, it is explicit that saponin induces a ten times lower critical micelles concentration (CMC) and adsorption tendency on sandstone rocks, which can make saponin a superior natural surfactant with invaluable applications in chemical EOR jobs. [ABSTRACT FROM AUTHOR]

Whole-biomass adhesives are the research hotspot of wood adhesives andcan improve the competitiveness of adhesives. The tannin–sucrose adhesive studied by our research group shows good bonding performance, but poor bonding stability induced by low viscosity. In this study, the tannin–sucrose adhesive was modified by isolated soybean protein (SPI), the effect of the SPI substitution ratio for tannin on the properties of the tannin–sucrose–SPI composite adhesive was investigated, and the bonding mechanism was explored using Fourier-transform infrared spectroscopy (FT-IR), thermogravimetry (TG), X-ray diffraction (XRD), and gas chromatography–mass spectroscopy (GC–MS). The results showed that: (1) when the SPI substitution ratio was above 40%, the viscosity of the composite adhesive increased significantly, which effectively avoided adhesive leakage. (2) The tannin–sucrose–SPI composite adhesive displayed high bonding performance and water resistance. (3) The FTIR and GC–MS results revealed that the curing mechanism of the tannin–sucrose–SPI adhesive was very complicated, but it was certain that the conversion of sucrose into furan compounds, especially 5-hydroxymethylfurfural (5-HMF), was the core of the cross-linking reaction of the adhesive when elevating temperature. (4) The macromolecules and high reactivity of SPI compensated for the shortage of high temperature required for the conversion of sucrose into furanic cross-linkers so that the tannin–sucrose–SPI adhesive experienced an efficient curing reaction at a low temperature, and the reaction degree and thermal stability of the curing product increased. [ABSTRACT FROM AUTHOR]

Stingless bees are endemic in northeastern Brazil, where they are exploited for honey production and crop pollination. The therapeutic use of honey can be attributed to its antibacterial and antioxidant activities. The effects of time and storage temperature on Melipona scutellaris honey were evaluated by physicochemical and microbiological parameters as well as by the analysis of bioactive compounds and antioxidant activity. Fresh honey samples were monitored at 5 and 30 °C for 150 days. The total acidity and HMF increased, while pH and diastase activity significantly decreased over time at 30 °C (p < 0.05). Fresh honey met all the established parameters. In contrast, due to storage, it failed to meet the criteria set in the current legislation for Melipona with the most drastic shortcomings observed at 30 °C. Unlike monosaccharides, acetic and lactic acid concentrations increased, indicating fermentation. During storage, the total phenolic compounds and flavonoids contents were reduced along with antioxidant activities measured by DPPH, ABTS, and FRAP methods. On the 60th day of storage at 5 °C, dextrose crystallization began, and the water content increased. Storage at 5 °C for up to 60 days resulted in minor changes, but after 150 days, storage at 30 °C showed reduced bioactive degradation and higher antioxidant activity. Therefore, the storage conditions associated with crystallization were found to control the stability of Melipona scutellaris honey. [ABSTRACT FROM AUTHOR]

Persian gum is an Iranian native gum which obtains from the trunk and branches of wild almond tree. This gum is found in different colors and there is a direct relation between its color and tannin content: the darker the color, the higher the amount of tannin. Since the bioavailability of proteins and minerals is limited by tannins, they are known as anti -nutrient compounds; hence, it is essential to remove tannin from Persian gum in order to increase its quality and amount of utilization in the food industry. Thereupon, tannin removal from Persian gum using different thermal and non -thermal methods was the main aim of this research. In this regard, soaking either in water or saline solutions (mono - and divalent salts) was considered as non -thermal method. On the other hand, autoclaving (121 ̊C for 20 min) and boiling (5, 10 and 15 min) were applied as thermal methods for tannin removal of Persian gum which was categorized based on color: white, yellow and brownish. As well, weight reduction of gum granules and rheological properties were investigated after tannin removal. According to the results, the highest tannin removal was observed in the case of brownish Persian gum and the most yield of tannin removal belonged to soaking in water for 180 min (75.67 ± 0.25 %), using CaCl 2 solution at the concentration of 1% (w/w) (74.32 ± 0.54 %) and boiling for 15 min (67.08 ± 0.19 %), respectively (p < 0.05). Based on rheological analysis, apparent viscosity of samples after soaking either in water or CaCl 2 solution as well as boiling was higher than control sample. However, the suitable rheological model for control and the treated gums was Herschel - Bulkley, indicating that type of flow behavior did not been affected by tannin removal. [ABSTRACT FROM AUTHOR]

Kelulut (stingless bee) honey (KH) possesses a wide range of benefits for human consumption and can exhibit medical effects. Due to its high value, this premium honey is often adulterated with different types of cheaper sugars, causing low nutrients and potential food safety threats in the final product. This study aims to determine the physicochemical, rheological, and antibacterial properties of sugar-based adulterated KH from the stingless bee species Heterotrigona itama. Adulterated samples were prepared using pure honey mixed with different concentrations of high fructose corn syrup (HFCS), i.e., 10%, 20%, 30%, 40%, and 50%. Water activity, colour, total soluble solids, pH, turbidity, viscosity, and antimicrobial activity of KH were determined. In addition, the primary sugar composition (fructose, glucose, and trehalulose) was determined by high-performance liquid chromatography with evaporative light-scattering detection (HPLC-ELSD). This study shows that the increasing percentage of HFCS addition in the KH samples significantly increases (p < 0.05) the total soluble solids, colour, pH, turbidity, viscosity, glucose, and fructose content; meanwhile, the water activity and trehalulose were reduced significantly (p < 0.05). Antimicrobial activity against S. aureus was reduced significantly (p = 0.006) by an increased percentage of HFCS compared to Control. Antimicrobial activity against P. aeruginosa was also found to be reduced significantly but showed non-significant effect from an increased percentage of HFCS in honey (p = 0.413). The bacterium S. aureus was more vulnerable to treatment with honey from both Control and adulterated groups compared to P. aeruginosa. In conclusion, HFCS-adulterated KH and authentic KH can be differentiated using all the parameters investigated. These data are vital for the governing bodies to ensure that KH sold in the markets is free from HFCS adulteration. [ABSTRACT FROM AUTHOR]

Flos sophorae immaturus (FSI) is considered to be a natural hypoglycemic product with the potential for a-glucosidase inhibitory activity. In this work, the polyphenols with α-glucosidase inhibition in FSI were identified, and then their potential mechanisms were investigated by omission assay, interaction, type of inhibition, fluorescence spectroscopy, circular dichroism, isothermal titration calorimetry and molecular docking analysis. The results showed that five polyphenols, namely rutin, quercetin, hyperoside, quercitrin and kaempferol, were identified as a-glucosidase inhibitors with IC50 values of 57, 0.21, 12.77, 25.37 and 0.55 mg/mL, respectively. Quercetin plays a considerable a-glucosidase inhibition role in FSI. Furthermore, the combination of quercetin with kaempferol generated a subadditive effect, and the combination of quercetin with rutin, hyperoside and quercitrin exhibited an interference effect. The results of inhibition kinetics, fluorescence spectroscopy, isothermal titration calorimetry and molecular docking analysis showed that the five polyphenols were mixed inhibitors and significantly burst the fluorescence intensity of α-glucosidase. Moreover, the isothermal titration calorimetry and molecular docking analysis showed that the binding to α-glucosidase was a spontaneous heat-trapping process, with hydrophobic interactions and hydrogen bonding being the key drivers. In general, rutin, quercetin, hyperoside, quercitrin and kaempferol in FSI are potential α-glucosidase inhibitors. [ABSTRACT FROM AUTHOR]

Deep eutectic solvents (DES), as a green alternative to traditional organic solvents in biocatalysis, not only activate proteins but even increase the efficiency of enzymatic reactions. Here, DES were used in a combinatorial enzyme-catalyzed system containing β-glucosidase BGLAt and β-galactosidase BGALAo to produce deglycosylated ginsenosides (De-g) from ginseng extracts (GE). The results showed that DES prepared with betaine and ethylene glycol (molar ratio, 1:2) could significantly stimulate the activity of the combinatorial enzymes as well as improve the acid resistance and temperature stability. The DES-based combinatorial enzyme-catalyzed system could convert 5 g of GE into 1.24 g of De-g (F1, F2, 20 (S)-PPT, and CK) at 24 h, which was 1.1 times that of the buffer sample. As confirmed by the spectral data, the changes in the conformations of the combinatorial enzymes were more favorable for the binding reaction with the substrates. Moreover, the constructed DES-based aqueous two-phase system enabled the recovery of substantial amounts of DES and De-g from the top phase. These results demonstrated that DES shows great application as a reaction solvent for the scale-up production of De-g and provide insights for the green extraction of natural products. [ABSTRACT FROM AUTHOR]

Antinutrients such as phytic acids, tannins, saponin, and enzyme inhibitors are phytochemicals that can decrease the bioavailability of micro- and macronutrients, thus causing them to be unavailable for absorptions in the digestive system. Antinutrients are a major concern especially in countries where plant-based commodities such as wheat, legumes, and cereals are staple foods, for the antinutrients can cause not only mineral deficiencies, but also lead to more serious health issues. Although various thermal and non-thermal processing methods such as cooking, boiling, and fermentation processes have been practiced to decrease the level of antinutrients, these processes may also undesirably influence the final products. More advanced practices, such as ozonation and cold plasma processing (CPP), have been applied to decrease the antinutrients without majorly affecting the physicochemical and nutritional aspects of the commodities postprocessing. This review will cover the types of antinutrients that are commonly found in plants, and the available processing methods that can be used, either singly or in combination, to significantly decrease the antinutrients, thus rendering the foods safe for consumption. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Food Safety & Quality is the property of Journal of Food Safety & Quality Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Spring blossom honey from regions with many rape fields tends to crystalize rapidly after harvesting. The crystallization process needs to be controlled by stirring in order to avoid the formation of coarse crystals and to ensure the creaminess of honey. The aim of this study was to investigate how various parameters of the stirring process influence the creaminess of spring blossom honey in order to give recommendations for beekeeping practices. The creaminess was quantified by measuring the crystal size by microscopic analysis, measuring the whiteness index by color analysis using CIE Lab and by sensory analysis. We investigated the influence of five stirring parameters, including the type of stirring device, honey pretreatment, stirring temperature (14 °C to room temperature), stirring interval (1 to 24 times) and stirring time (1–15 min) on the creaminess of honey. We found that the stirring temperature is the most important factor for honey creaminess. At the optimal temperature of 14 °C, other factors like seed honey, stirring time and stirring interval have only a neglectable effect. If the optimal temperature of 14 °C cannot be maintained, as it may happen in beekeepers' practice, sieving the honey with a mesh size of 200 µm before stirring, the addition of seed honey prepared with a kitchen food processor, and using a stirring screw and stirring several times per day is recommended. [ABSTRACT FROM AUTHOR]

Simple Summary: An increasing global population will lead to an increased demand for protein and a protein deficit. The production of soy, the most common protein source in animal nutrition, is often associated with deforestation and long transport distances. In this context, duckweed can be considered an alternative protein source for animal nutrition. The term duckweed describes a group of small plants floating on the water surface with sizes up to 1.5 cm. Three different duckweed batches consisting of different species were tested as feed for broiler chickens. They showed different impacts on feed intake, animal growth, and digestibility. Digestibility describes the share of nutrients resorbed within the digestive system. Possible compounds that inhibited the digestibility were identified. The results suggest that the nutritional value of duckweed and its influence on animal performance are variable. Hence, a stable duckweed biomass quality adapted to the requirements of broilers is needed. Duckweed is gaining attention in animal nutrition and is considered as a potential alternative protein source for broiler chickens. In order to evaluate the nutritional value of duckweed, three individual batches were investigated. They consisted of a mixture of Lemna minuta and Lemna minor (A, 17.5% crude protein), Spirodela polyrhiza (B, 24.6% crude protein) and Lemna obscura (C, 37.0% crude protein). Treatment diets contained 50% batch A, 50% batch B, and 25, 50 and 75% of batch C. All diets were fed to broiler chickens (Ross 308) from an age of 21 to 27 days. Diets with a share of 50 and 75% of batch C led to decreased feed intake (109.3 and 74.9 g/day, respectively) compared to the control. Standardized ileal digestibility of crude protein and amino acids differed significantly between duckweed batches, at values for methionine between 49.9 and 90.4%. For all amino acids, batch A consistently had the lowest and batch C the highest digestibility. Batches had different tannin contents of 2943, 2890 and 303 mg/kg for batches A, B and C, respectively. The apparent ileal digestibility of phosphorus differed significantly between all batches (50.8–78.9%). Duckweed can be used as a protein feed for broiler chickens. However, a defined and stable biomass composition optimized for the requirements of broiler chickens is needed. [ABSTRACT FROM AUTHOR]