Search

This work presents a generalized angle-dependent ray transfer function that can accurately map the angular and spatial distribution of light intensities on the tissue surface onto a camera image plane in a non-contact camera-based imaging system. The method developed here goes beyond existing ray transfer models that apply to angle-averaged tomographic data alone. The angle-dependent ray transfer operator was constructed using backward ray tracing based on radiation surface theory. The proposed method was validated using numerical phantoms and experimental data from an actual non-contact imaging system. [ABSTRACT FROM AUTHOR]

These authors contributed equally: Xiangfeng Jia and Jingfei Chen. Correction to: I Scientific Reports i https://doi.org/10.1038/s41598-023-33166-3, published online 18 April 2023 Feiyong Chen was omitted from the author list in the original version of this Article. [Extracted from the article]

Molecular dynamics simulation method was used to study the aggregation of Na and Ca salts in different concentrations of Naphthalene-dipeptide (2NapFF) solutions. The results show that high-valence Ca2+ triggers the formation of a gel at a certain dipeptide concentration, and the low-valence Na+ system follows the aggregation law of general surfactants. The results also show that hydrophobic and electrostatic forces are the main driving forces for the formation of dipeptide aggregates, and that hydrogen bonds do not play a major role in the formation of dipeptide solution aggregates. Hydrophobic and electrostatic effects are the main driving forces for the formation of gels in dipeptide solutions triggered by Ca2+. Electrostatic attraction drives Ca2+ to form a weak coordination with four oxygen atoms on two carboxyl groups, which causes the dipeptide molecules to form a gel with a branched network structure. [ABSTRACT FROM AUTHOR]

Si3N4 whiskers were modified with triethoxysilane as a means to improve the interfacial interaction with a poly-amide imide (PAI). The Si3N4/PAI composites were prepared by in-situ polymerization as an approach to improve the friction behavior and mechanical properties in order to meet the performance needs of electrical transformers and motors in harsh environments. 4,4′-diamino diphenyl ether, m-phenylenediamine, triethylamine, trimellitic anhydride chloride, and Si3N4 whiskers were used to manufacture Si3N4/PAI composite, which was then characterized for friction and mechanical behavior. The research showed that the addition of Si3N4 whiskers improved the mechanical properties and friction properties of PAI. When the whisker content was 10 wt%, the tensile strength of the composite was 137.5 MPa, which is 15% higher than pure PAI, and the wear rate was 0.69 × 10-8 g/N·m, which is 57% lower than pure PAI, and the friction coefficient was 0.47, which was an increase of 9%. In aerospace, machinery, and transportation applications, these materials may have better performance due to their improved combination of properties. [ABSTRACT FROM AUTHOR]