153 results on '"Jia, Fanghui"'
Search Results
2. Novel Fabrication of Ultra-thin Copper/SS304L Composite Microchannels
3. Exploring the use of graphene lubricant and TiO2 nanolubricants in micro deep drawing of stainless steel SUS301
4. Effects of TiB2 content on microstructural evolution, microhardness and tribological behaviours of Al matrix composites reinforced with TiB2 particles
5. Novel Fabrication of Ultra-thin Copper/SS304L Composite Microchannels
6. A microstructure-based multiscale approach to predict the formability of multiphase steels
7. Tribological behaviour of ultra-thin stainless steel in micro deep drawing with graphene nanosheets
8. Evolutions of microstructure and mechanical properties of copper/SS304L composite micro channels during micro rolling
9. Micro rolling fabrication of copper/SS304L micro composite channels
10. Investigation of microstructure and tribological performances of high-fraction TiC/graphene reinforced self-lubricating Al matrix composites
11. Ex situ analysis of high-strength quenched and micro-alloyed steel during austenitising bending process: numerical simulation and experimental investigation
12. A method for the determination of individual phase properties in multiphase steels
13. Experimental study on drawability of aluminium-copper composite in micro deep drawing
14. Investigation of compact tensile and fracture mechanical properties of a duplex stainless steel bimetal composite with the interfacial zone
15. Effects of inter-layer remelting frequency on the microstructure evolution and mechanical properties of equimolar CoCrFeNiMn high entropy alloys during in-situ powder-bed arc additive manufacturing (PBAAM) process
16. Microstructure, mechanical and thermal properties of ultrafine-grained Al2024–TiC-GNPs nanocomposite
17. Design of a novel austenitising bending process in forming characteristics of high-strength quenched and micro-alloyed steel: Experiment and simulation
18. Microstructure and texture evolution of cold-rolled low-Ni Cr–Mn–N austenitic stainless steel during bending
19. Understanding the role of water-based nanolubricants in micro flexible rolling of aluminium
20. Hot deformation behaviour and interfacial characteristics of bimetal composite at elevated temperatures
21. Interfacial characteristics and mechanical properties of duplex stainless steel bimetal composite by heat treatment
22. Analysis of flow behaviour and strain partitioning mechanism of bimetal composite under hot tensile conditions
23. Large rotating magnetocaloric effects in polycrystalline Ni-Mn-Ga melt-spun ribbons
24. Al-Cu Composite’s Springback in Micro Deep Drawing
25. Microstructural evaluation of WC and steel dissimilar bilayered composite obtained by spark plasma sintering
26. Experimental Investigation on Micro Deep Drawing of Stainless Steel Foils with Different Microstructural Characteristics
27. Effects of nano-particle lubrication on micro deep drawing of Mg-Li alloy
28. Effect of water-based nanolubricant containing nano-TiO2 on friction and wear behaviour of chrome steel at ambient and elevated temperatures
29. Study on edge cracking of copper foils in micro rolling
30. Analysis of bending characteristics of bimetal steel composite
31. Exploring the use of graphene lubricant and TiO2 nanolubricants in micro deep drawing of stainless steel SUS301.
32. Effect of Grain Orientation on Microstructure and Mechanical Properties of FeCoCrNi High-Entropy Alloy Produced via Laser Melting Deposition
33. Micro forming of metallic composites
34. Effects of Holding Time on the Sintering of Cemented Tungsten Carbide Powder and Bonding with High-Strength Steel Wire
35. Numerical and experimental investigation on the forming behaviour of stainless/carbon steel bimetal composite
36. In Situ Formation of Al3Ti and Its Effects on the Microstructure, Hardness and Tribological Properties of Al Matrix Composites with Various Ti Contents
37. Enhanced Performance of Micro Deep Drawing through the Application of TiO 2 Nanolubricant and Graphene Lubricants on SUS 301 Stainless Steel Foil.
38. Analysis of TiO2 Nanolubricant Influence in Micro Deep Drawing of Stainless Steel SUS301
39. Achieving balanced strength-ductility of heterostructured TiC/graphene nanoplatelets (GNPs) reinforced Al matrix composites by tuning TiC-to-GNPs ratio
40. Investigations of fracture on DP980 steel sheet in roll forming process
41. Lubrication Performance and Mechanism of Water-Based TiO2 Nanolubricants in Micro Deep Drawing of Pure Titanium Foils
42. Effect of heat treatment on the microstructure and mechanical properties of copper/SS304L composite sheets
43. In Situ Formation of Al 3 Ti and Its Effects on the Microstructure, Hardness and Tribological Properties of Al Matrix Composites with Various Ti Contents.
44. Analysis of TiO 2 Nanolubricant Influence in Micro Deep Drawing of Stainless Steel SUS301.
45. Simulation, microstructure and austenite reconstruction of a medium carbon micro-alloyed steel subjected to an austenitising bending process
46. Yielding Behavior and Strengthening Mechanisms of a High Strength Ultrafine‐Grained Cr–Mn–Ni–N Stainless Steel
47. Synergistic effects of TiC and graphene on the microstructure and tribological properties of Al2024 matrix composites
48. Lubrication Performance and Mechanism of Water-Based TiO 2 Nanolubricants in Micro Deep Drawing of Pure Titanium Foils.
49. Effects of forming velocity on micro deep drawing performance with different blank thickness
50. A study of influence of hydraulic pressure on micro-hydromechanical deep drawing considering size effects and surface roughness
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.