Search

In this study, shells of sea crab and fungus Aspergillus niger were subjected for chitosan extraction which has been done following demineralization, deproteination and deacetylation. Chitosan yield from crab shell and fungi was 37.5% and 39.3% respectively and water binding capacity was 58.44% and 60.21% respectively. The extracted chitosan was characterized using Fourier transform infrared spectroscopy (FTIR) and subjected for antibacterial activity against Urinary tract infection (UTI) pathogens – Klebsiella pneumoniae, Proteus mirabilis and E. coli. Chitosan of crab shell showed better antibacterial activity than fungal derived chitosan. Chitosan gel was prepared using the extracted chitosan where it was also showing good antibacterial activity.

Diabetes is a disorder in which blood glucose levels rise as a result of the body's cell's inability to adequately utilize glucose. Several drugs are used to lower the blood glucose level. Annona squamosa is an important plant that is used as an antidiabetic, antioxidant, and antimicrobial agent. In the present study, acetone and isopropyl alcohol extract of Annona squamosa have been used to find out its biological property and found that it has potential antimicrobial property which was identified by using Agar well diffusion assay and confirmed by using Minimal inhibitory concentration. Effect of extract on swarming motility of the test pathogens were also tested. The extract of the leaves was tested for amylase inhibition activity using plate assay method with crude amylase enzyme isolated from Bacillus sp. From the findings, it was clear that Annona squamosa L. is an effective bioactive agent which has antimicrobial and antiamylolytic properties. [ABSTRACT FROM AUTHOR]

In this study, parts consisting of spines, rind, seed coat and seed were sundried. The rind, seed coat and seed were powdered and subjected to ethanol extraction and subjected for characterization using Thin Layer Chromatography (TLC) and Fourier Transform Infrared Spectroscopy (FTIR). Anti-bacterial and Anti-fungal activity tests by well diffusion method in agar plates were performed. The powdered samples and spines were subjected to fiber extraction and subjected for FTIR analysis, and lignocellulosic content. Fibers from spines and powdered samples were used for removal of crystal violet and chromium in adsorption study. Rind has antimicrobial properties against S. aureus, E. coli, and C. albicans. Seed has antibacterial property against E. coli. Fibers of spine, rind, seed coating and seed all showed highest content of lignin and showed some adsorbent property. [ABSTRACT FROM AUTHOR]

In this study, aqueous extract of endosperm of Borassus flabellifer L. (Palmyra palm) seed was subjected for antimicrobial activity, antioxidant activity and antiproliferative activity. It was found to be more effective in suppressing UTI bacterial growth at the concentration of 25µl/well. Similar to how Aspergillus niger shown greatest zone of inhibition at concentration of 300 µl/ml, Aspergillus brasiliensis and A. flavus displayed highest zone of inhibition at 400 µl/ml. The extract was found to have good antiproliferative activity against Blood Cancer (MOLT – 4) cell lines. [ABSTRACT FROM AUTHOR]

Biological macromolecules like polysaccharides/proteins/glycoproteins have been widely used in the field of tissue engineering due to their ability to mimic the extracellular matrix of tissue. In addition to this, these macromolecules are found to have higher biocompatibility and no/lesser toxicity when compared to synthetic polymers. In recent years, scaffolds made up of proteins, polysaccharides, or glycoproteins have been highly used due to their tensile strength, biodegradability, and flexibility. This review is about the fabrication methods and applications of scaffolds made using various biological macromolecules, including polysaccharides like chitosan, agarose, cellulose, and dextran and proteins like soy proteins, zein proteins, etc. Biopolymer-based nanocomposite production and its application and limitations are also discussed in this review. This review also emphasizes the importance of using natural polymers rather than synthetic ones for developing scaffolds, as natural polymers have unique properties, like high biocompatibility, biodegradability, accessibility, stability, absence of toxicity, and low cost.

Metal nanoparticles, such as gold nanoparticles, silver nanoparticles, etc., have many benefits and have been in use for a very long time. Nevertheless, a number of concerns have been raised about the environmental impact and the possibility of exposure to various living systems at the moment. Thus, in this study, silver nanoparticles were synthesized by using plant gum from Bauhinia purpurea and characterization was done using UV-Visible Spectroscopy, Scanning Electron Microscopy, X-ray Diffraction, etc. To determine the accumulation and toxic effects caused by the nanoparticles, Eudrilus eugeniae , Danio rerio , and their embryos were exposed to the synthesized silver nanoparticles and evaluated using microscopic observation, histology, and Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES).

The aim of this investigation is to determine whether the methanolic extracts of Sargassum wightii can protect rats against isoproterenol-induced myocardial infarction. Four different groups of rats (6 rats in each group) were taken; where group 1 comprised of normal untreated rats, group 2 was injected with Isoproterenol (synthetic catecholamine), group 3 was considered as standard and hence, was injected with Isoproterenol + Simvastatin and group 4 was treated with Isoproterenol + Sargassum wightii's extract. Cardioprotective effects of Sargassum wightii was observed via the changes in the lipid profile, cardio marker enzymes and through histopathological studies. Rats treated with the extract of S. wightii showed a significant reduction in total cholesterol, LDL-cholesterol, serum triglycerides and increase in HDL- cholesterol level indicating an undamaged myocardial membrane. Likewise, low enzyme activity in Sargassum wightii treated rats clearly indicated the cardioprotective effects of Sargassum wightii. Histopathological studies were also done to observe the changes on the rats at the tissue level and no pathological changes were observed in Sargassum wightii treated rats. Hence, methanolic extract of Sargassum wightii is evidenced to possess cardioprotective activity against myocardial infarction. [ABSTRACT FROM AUTHOR]

Polyhydroxyalkanoate (PHA), specifically poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (P(3HB-co-3HHx), PHBHHx) with physical properties governed by the 3-hydroxyhexanoate (3HHx) mole fraction, is a promising bioplastic. Although engineered strains used to produce P(3HB-co-3HHx) with various 3HHx mole contents and fermentation techniques have been studied, mass production with specific 3HHx fractions and monomers depends on the batch, supply of substrates, and strains, resulting in the time-consuming development of strains and complex culture conditions for P(3HB-co-3HHx). To overcome these limitations, we blended poly(3-hydroxybutyrate) [(P(3HB), produced from C. necator H16] and P(3HB-co-20 mol%3HHx) [from C. necator 2668/pCB81] to prepare films with various 3HHx contents. We evaluated the molecular weight and physical, thermal, and mechanical properties of these films and confirmed the influence of the 3HHx monomer content on the mechanical and thermal properties as well as degradability of the blended P(3HB-co-3HHx) films containing various 3HHx mole fractions, similar to that of original microbial-based P(3HB-co-3HHx). Moreover, the degradation rate analyzed via Microbulbifer sp. was >76% at all blending ratios within 2 days, whereas a weaker effect of the 3HHx mole fraction of the blended polymer on degradation was observed. P(3HB-co-3HHx) could be produced via simple blending using abundantly produced P(3HB) and P(3HB-co-20 mol%HHx), and the resulting copolymer is applicable as a biodegradable plastic. [ABSTRACT FROM AUTHOR]

This study focused on the isolation of actinobacteria capable of producing extracellular keratinase from keratin-rich residues, which led to the selection of an actinobacterial strain referenced as Streptomyces strain DZ 06 (ES41). The Plackett–Burman screening plan was used for the statistical optimization of the enzymatic production medium, leading to the identification of five key parameters that achieved a maximum activity of 180.1 U/mL. Further refinement using response surface methodology (RSM) with a Box–Behnken design enhanced enzyme production to approximately 458 U/mL. Model validation, based on the statistical predictions, demonstrated that optimal keratinase activity of 489.24 U/mL could be attained with 6.13 g/L of chicken feather meal, a pH of 6.25, incubation at 40.65 °C for 4.11 days, and an inoculum size of 3.98 × 107 spores/mL. The optimized culture conditions yielded a 21.67-fold increase in keratinase compared with the initial non-optimized standard conditions. The results show that this bacterium is an excellent candidate for industrial applications when optimal conditions are used to minimize the overall costs of the enzyme production process. [ABSTRACT FROM AUTHOR]

The rising demand for effective bone regeneration has underscored the limitations of traditional methods like autografts and allografts, including donor site morbidity and insufficient biological signaling. This review examines nanoparticles (NPs) in tissue engineering (TE) to address these challenges, evaluating polymers, metals, ceramics, and composites for their potential to enhance osteogenesis and angiogenesis by mimicking the extracellular matrix (ECM) nanostructure. The methods involved synthesizing and characterizing nanoparticle-based scaffoldsand integrating hydroxyapatite (HAp) with polymers to enhance mechanical properties and osteogenic potential. The results showed that these NPs significantly promote cell growth, differentiation, and bone formation, with carbon-based NPs like graphene and carbon nanotubes showing promise. NPs offer versatile, biocompatible, and customizable scaffolds that enhance drug delivery and support bone repair. Despite promising results, challenges with cytotoxicity, biodistribution, and immune responses remain. Addressing these issues through surface modifications and biocompatible molecules can improve the biocompatibility and efficacy of nanomaterials. Future research should focus on long-term in vivo studies to assess the safety and efficacy of NP-based scaffolds and explore synergistic effects with other bioactive molecules or growth factors. This review underscores the transformative potential of NPs in advancing BTE and calls for further research to optimize these technologies for clinical applications. [ABSTRACT FROM AUTHOR]

Silver nanoparticles (AgNPs) are leading the way in nanotechnological innovation, combining the captivating properties of silver with the accuracy of nanoscale engineering, thus revolutionizing material science. Three main techniques arise within the alchemical domains of AgNP genesis: chemical, physical, and biological synthesis. Each possesses its distinct form of magic for controlling size, shape, and scalability—key factors necessary for achieving expertise in the practical application of nanoparticles. The story unravels, describing the careful coordination of chemical reduction, the environmentally sensitive charm of green synthesis utilizing plant extracts, and the precise accuracy of physical techniques. AgNPs are highly praised in the field of healthcare for their powerful antibacterial characteristics. These little warriors display a wide-ranging attack against bacteria, fungi, parasites, and viruses. Their critical significance in combating hospital-acquired and surgical site infections is highly praised, serving as a beacon of hope in the fight against the challenging problem of antibiotic resistance. In addition to their ability to kill bacteria, AgNPs are also known to promote tissue regeneration and facilitate wound healing. The field of cancer has also observed the adaptability of AgNPs. The review documents their role as innovative carriers of drugs, specifically designed to target cancer cells with accuracy, minimizing harm to healthy tissues. Additionally, it explores their potential as cancer therapy or anticancer agents capable of disrupting the growth of tumors. In the food business, AgNPs are utilized to enhance the durability of packing materials and coatings by infusing them with their bactericidal properties. This results in improved food safety measures and a significant increase in the duration that products can be stored, thereby tackling the crucial issue of food preservation. This academic analysis recognizes the many difficulties that come with the creation and incorporation of AgNPs. This statement pertains to the evaluation of environmental factors and the effort to enhance synthetic processes. The review predicts future academic pursuits, envisioning progress that will enhance the usefulness of AgNPs and increase their importance from being new to becoming essential within the realms of science and industry. Besides, AgNPs are not only a subject of scholarly interest but also a crucial component in the continuous effort to tackle some of the most urgent health and conservation concerns of contemporary society. This review aims to explore the complex process of AgNP synthesis and highlight their numerous uses, with a special focus on their growing importance in the healthcare and food business sectors. This review invites the scientific community to explore the extensive possibilities of AgNPs in order to fully understand and utilize their potential. [ABSTRACT FROM AUTHOR]

Corn silk (Stigma maydis) is one of the traditional medicines for treating many microbial infections. However, there is little literature on the bioactive compounds responsible for these activities. This study was designed to investigate the phytochemical constituents present in corn silk and to screen the isolated compounds for antimicrobial activity. The pulverized plant sample of 1.14 kg was extracted with 3.6 L of methanol by cold maceration for 3 days. The extract was screened for phytochemicals, followed by isolation of constituent phytochemicals, characterization, and identification of isolated compounds. The isolates were screened for antibacterial and antifungal activities. The phytochemical screening revealed the presence of alkaloids, flavonoids, coumarins, tannins, reducing sugars, saponins, terpenoids, sterols, and cardiac glycosides. Further phytochemical investigation of the chloroformic subfraction of the methanolic extract of the silk led to the isolation of behenic acid and stigmasterol after running column chromatography as well as other chromatographic methods. The identity of the isolated compounds was established based on extensive spectroscopic analyses of their IR, 1D, 2D NMR data and comparing the data to the reported literature. Stigmasterol was active against Staphylococcus aureus and the fungal strain Candida albicans at 25 µg/mL while the mean minimum inhibitory concentration of behenic acid against Staphylococcus aureus was 100 µg/mL, Tinea corporis and Klebsiella pneumoniae were susceptible at 25 µg/mL. The study showed that plant secondary metabolites might be responsible for the reported biological activities of corn silk. It is the first report of behenic acid isolated from corn silk. [ABSTRACT FROM AUTHOR]

In this study, a comparative analysis of silver nanoparticles treatment and chitosan coating on packaging paper barrier properties was carried out. In order to examine the water, grease, and antibacterial barrier properties of silver nanoparticle-treated and chitosan-coated laboratory-obtained paper samples, a mixture of bleached softwood and hardwood celluloses was used. In order to conduct the comparative analysis SEM, water contact angle, Cobb60, and Kit tests were carried out on a cellulose sample, and four paper samples (three of them treated with silver nanoparticles—1, 2, and 3 mL/20 cm2 or chitosan coated—0.5, 1, and 2 g/m2) together with the inhibition activity against nine Gram-positive and Gram-negative bacteria, yeast, and fungal strains. The study found out that increasing the silver nanoparticle treatment and chitosan coating led to improved water resistance, while grease resistance was improved only for chitosan coated paper samples. Additionally, paper treated with 3 mL/20 cm2 of silver nanoparticles had the highest antibacterial protection (81.6%) against the Gram-positive bacterium Staphylococcus aureus, followed by Gram-negative Escherichia coli (75.8%). For the rest of the studied microorganisms, the average efficiency of the treated paper was 40.79%. The treatment of the paper with 1 and 2 mL/20 cm2 of silver nanoparticles was less effective—27.13 and 39.83%, respectively. The antibacterial protection of 2 g/m2 chitosan-coated paper samples was the most effective (average 79%) against the tested bacterial, yeast, and fungal strains. At 1 and 0.5 g/m2 chitosan coatings, the efficiency was 72.38% and 54.67%, respectively. Gram-positive bacteria, yeasts, and fungal strains were more sensitive to chitosan supplementation. [ABSTRACT FROM AUTHOR]

The industrial production of polyhydroxyalkanoates (PHAs) faces several limitations that hinder their competitiveness against traditional plastics, mainly due to high production costs and complex recovery processes. Innovations in microbial biotechnology offer promising solutions to overcome these challenges. The modification of the biosynthetic pathways is one of the main tactics; allowing for direct carbon flux toward PHA formation, increasing polymer accumulation and improving polymer properties. Additionally, techniques have been implemented to expand the range of renewable substrates used in PHA production. These feedstocks are inexpensive and plentiful but require costly and energy-intensive pretreatment. By removing the need for pretreatment and enabling the direct use of these raw materials, microbial biotechnology aims to reduce production costs. Furthermore, improving downstream processes to facilitate the separation of biomass from culture broth and the recovery of PHAs is critical. Genetic modifications that alter cell morphology and allow PHA secretion directly into the culture medium simplify the extraction and purification process, significantly reducing operating costs. These advances in microbial biotechnology not only enhance the efficient and sustainable production of PHAs, but also position these biopolymers as a viable and competitive alternative to petroleum-based plastics, contributing to a circular economy and reducing the dependence on fossil resources. [ABSTRACT FROM AUTHOR]

The application of biotechnology through the utilization of enzymes is considered an easy and inexpensive method of producing valuable products from waste resources. The present study describes the production of a keratinolytic enzyme from Pseudomonas aeruginosa S-04, which showed efficiency for feather biodegradation. The production of extracellular keratinase was improved 1.3-fold by optimizing various parameters through the one factor at a time (OFAT) approach. The keratinase was purified to homogeneity by ammonium sulfate precipitation and DEAE-cellulose anion exchange chromatography. The purified keratinase (35.5 kDa) displayed optimal activity at 60 °C and pH 9.5 and was stable between pH 7 and 9.5 and temperatures ranging from 4 to 40 °C for 2 h. The catalytic activity of keratinase was enhanced in the presence of Fe3+ and Mn2+ ions, Triton X-100, Tween 20, DMSO, isopropyl alcohol and ethanol, but reduced activity was recorded in the presence of methanol and acetone. Furthermore, the enzyme activity was deactivated by EDTA, suggesting that this keratinase belongs to a metalloprotease family. The Km and Vmax of the purified keratinase were 7.62 mg/ml and 200 U/mg protein, respectively. The partially purified keratinase displayed remarkable feather degradation capabilities (93% after 24 h), and the nutritional properties of the resulting feather hydrolysate make it a promising candidate for use as a poultry feed ingredient. Thus, thermostable alkaline keratinase from P. aeruginosa S-04 is a promising candidate that converts low-cost chicken feather waste into a value-added product, indicating a novel approach to feather waste treatment and utilization. [ABSTRACT FROM AUTHOR]

In recent years, biopolymer-based nano-drug delivery systems with antioxidative properties have gained significant attention in the field of pharmaceutical research. These systems offer promising strategies for targeted and controlled drug delivery while also providing antioxidant effects that can mitigate oxidative stress-related diseases. Generally, the healthcare landscape is constantly evolving, necessitating the continual development of innovative therapeutic approaches and drug delivery systems (DDSs). DDSs play a pivotal role in enhancing treatment efficacy, minimizing adverse effects, and optimizing patient compliance. Among these, nanotechnology-driven delivery approaches have garnered significant attention due to their unique properties, such as improved solubility, controlled release, and targeted delivery. Nanomaterials, including nanoparticles, nanocapsules, nanotubes, etc., offer versatile platforms for drug delivery and tissue engineering applications. Additionally, biopolymer-based DDSs hold immense promise, leveraging natural or synthetic biopolymers to encapsulate drugs and enable targeted and controlled release. These systems offer numerous advantages, including biocompatibility, biodegradability, and low immunogenicity. The utilization of polysaccharides, polynucleotides, proteins, and polyesters as biopolymer matrices further enhances the versatility and applicability of DDSs. Moreover, substances with antioxidative properties have emerged as key players in combating oxidative stress-related diseases, offering protection against cellular damage and chronic illnesses. The development of biopolymer-based nanoformulations with antioxidative properties represents a burgeoning research area, with a substantial increase in publications in recent years. This review provides a comprehensive overview of the recent developments within this area over the past five years. It discusses various biopolymer materials, fabrication techniques, stabilizers, factors influencing degradation, and drug release. Additionally, it highlights emerging trends, challenges, and prospects in this rapidly evolving field. [ABSTRACT FROM AUTHOR]

Per- and polyfluoroalkyl substances (PFAS), also known as forever chemicals, exhibit exceptional chemical stability and resistance to environmental degradation thanks to their strong C-F bonds and nonpolar nature. However, their widespread use and persistence have a devastating impact on the environment. This review examines the roles of PFAS in tribological applications, specifically in lubricants and lubricating systems. This article focuses on conventional and advanced lubricants, including ionic liquids (ILs) and their use in modern automotive vehicles. The objective of this paper is to provide a comprehensive overview of the adverse impacts of PFAS whilst acknowledging their outstanding performance in surface coatings, composite materials, and as additives in oils and greases. The pathways through which PFAS are introduced into the environment via lubricating systems such as in seals and O-rings are identified, alongside their subsequent dispersion routes and the interfaces across which they interact. Furthermore, we examine the toxicological implications of PFAS exposure on terrestrial and aquatic life forms, including plants, animals, and humans, along with the ecological consequences of bioaccumulation and biomagnification across trophic levels and ecosystems. This article ends with potential remediation strategies for PFAS use, including advanced treatment technologies, biodegradation, recovery and recycling methods, and the search for more environmentally benign alternatives. [ABSTRACT FROM AUTHOR]

Background: The elaboration of biocompatible nerve guide conduits (NGCs) has been studied in recent years as a treatment for total nerve rupture lesions (axonotmesis). Different natural polymers have been used in these studies, including cellulose associated with soy protein. The purpose of this report was to describe manufacturing NGCs suitable for nerve regeneration using the method of dip coating and evaporation of solvent with cellulose acetate (CA) functionalized with soy protein acid hydrolysate (SPAH). Methods: The manufacturing method and bacterial control precautions for the CA/SPAH NGCs were described. The structure of the NGCs was analyzed under a scanning electron microscope (SEM); porosity was analyzed with a degassing method using a porosimeter. Schwann cell (SCL 4.1/F7) biocompatibility of cell-seeded nerve guide conduits was evaluated with the MTT assay. Results: The method employed allowed an easy elaboration and customization of NGCs, free of bacteria, with pores in the internal surface, and the uniform wall thickness allowed manipulation, which showed flexibility; additionally, the sample was suturable. The NGCs showed initial biocompatibility with Schwann cells, revealing cells adhered to the NGC structure after 5 days. Conclusions: The fabricated CA/SPAH NGCs showed adequate features to be used for peripheral nerve regeneration studies. Future reports are necessary to discuss the ideal concentration of CA and SPAH and the mechanical and physicochemical properties of this biomaterial. [ABSTRACT FROM AUTHOR]

Bone regeneration and repair are complex processes with the potential of added complications, like delayed repair, fracture non-union, and post-surgical infections. These conditions remain a challenge globally, pressurizing the economy and patients suffering from these conditions. Applications of nanotechnology (NBT) in the field of medicine have provided a medium for several approaches to support these global challenges. Tissue engineering is one such field that has been on the rise in the last three decades through the utilization of NBT for addressing the challenges related to bone regeneration. First, NBT enables the formation of scaffolds at the nanoscale needed for bone tissue engineering (BTE) using natural and synthetic polymers, as well as with minerals and metals. Then, it aids the development of the nano-formulation strategized to deliver antimicrobial drugs and/or growth factors through various ways to enhance bone repair through the scaffold. Third, NBT facilitates the use of specialized nanoparticles to image and track cellular events in vitro as well as in vivo. This review is an effort to bring together the current knowledge in the field of BTE and present the scope of ever-evolving NBT, a contribution towards precision medicine. [ABSTRACT FROM AUTHOR]

The principles of creating biomedical materials based on biopolymers and their compositions for various medical applications are considered. The direction of creating materials with antimicrobial activity is especially emphasized using the example of polyhydroxyalkanoates. These biopolymers and composites based on them are most frequently used in the production of medical devices. Polyhydroxyalkanoates as a class of biopolymers, as well as polyhydroxybutyrate, the representative of this class most suitable for biomedical use, are analyzed in the context of increasing resistance to microorganisms. Progress in this direction achieved in recent years is reported. The influence of the supramolecular and molecular structure of the materials on the ability to biodegrade in the environment and a living organism is considered. The advantage of mixtures of biopolymers for achieving high degradation rates in comparison with the original polymers is noted. Promising antiseptics based on porphyrin metal complexes in combination with biopolymer nonwoven fibrous matrices are demonstrated. Characteristic features of preclinical tests of antiseptic materials are considered. A conclusion is drawn that the structural organization of a polymeric material or composite determines the level of intermolecular interactions during the formation of the material and thereby programs the set of functional properties and mechanism of degradation under the influence of aggressive external factors. [ABSTRACT FROM AUTHOR]

A great research effort is involved in polyhydroxyalkanoates (PHAs) production and characterization since they are an attractive degradable polyester family that potentially could substitute oil-based polymers. This is due to two main key factors: their production is sustainable, being that they are produced by microorganisms possibly fed by organic waste-derived products, and they are degradable. Moreover, PHAs' thermal and mechanical properties could be tuned by varying their monomeric composition through the proper selection of microorganism feedstock and bioreactor operative conditions. Hence, a rapid and facile determination of the PHA chemical structure by widely available instrumentation is useful. As an alternative to the standard gas-chromatographic method, a new procedure for the composition determination of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (P3HBV), the most common PHA copolymer, by attenuated total reflection FTIR (ATR-FTIR) is presented. It is based on the linear dependence of selected and normalized absorption band intensity with the molar fraction of repeating units. To break free from the crystallinity variability, which affects the result reproducibility and data scattering, the polymer sample was rapidly quenched from the melt directly on the surface of the ATR internal reflection element and analyzed. The data obtained from 14 samples with a molar fraction of 3-hydroxybutyrate repeating units (X3HB) ranging from 0.15 to 1 were analyzed. According to preliminary analyses, the normalized intensity of two absorption bands was selected to develop a calibration method able to predict X3HB of unknown samples and to evaluate the related uncertainty through prediction intervals of inverse regression. The proposed method proves to be useful for an easy and rapid estimation of P3HBV composition. [ABSTRACT FROM AUTHOR]

Secondary metabolites synthesized by the producer Streptomyces are widely used in the food, pharmaceutical, cosmetic, textile, and agricultural industries. These industries around the world are developing rapidly, as a result of which they need new engineering solutions that should increase the yield of the final product and optimize the production process. Understanding the dependence of the optimal correlation of the components of the nutrient medium on the increase in the biosynthesis of secondary metabolites by the producer Streptomyces will promote the development of these industries in economic and ecological aspects. In this study, we optimized the quantitative correlation of twelve (6+6) components of the nutrient fermentation medium for Streptomyces recifensis var. lyticus 2P-15. Foroptimization we used the simplex method of mathematical modeling of the optimization conditions of the biotechnological process. After optimization, a 6.36 times increase in the level of biosynthetic capacity was obtained compared to the control version of the medium. To determine the dynamics of biosynthesis, samples of culture fluid were taken. Sampling was carried out every 24 hours of cultivation, the dynamics of pH diapason, biomass accumulation in mg/ml and amylolytic activity in U/mL were determined. The correlation of amylolytic activity to the level of biomass accumulation was taken as the biosynthetic capacity of the strain. A photocolometric method based on the starch-iodine method was used to determine amylolytic activity. The volume of biomass accumulation was determined by a weighted method. As a result of the optimization, the composition of the nutrient medium was developed, in which the degree of synthesis of amylolytic enzymes increased by 6.11 times, and there was a significant increase in biomass accumulation, while the cost of the optimized medium was reduced by 1.5–2.0 times from the initial one. Positive dynamics were studied when new components were introduced into the environment, such as sodium glutamate and corn extract. Optimum concentrations of monosodium glutamate were established at 0.5% of the volume of the nutrient medium and corn extract at a concentration of 1%, respectively. The significance of the positive effect upon the introduction of heavy metal ions and some vitamins into the medium was also checked, the obtained results provide an opportunity for further research into these aspects of the composition of the nutrient medium. The advantage of biotechnological developments in matters of industrial enzymology is the opportunity to obtain not only raw materials for the pharmaceutical or other industries (where it will only acquire a final form), but also produce as a final product in a ready, convenient form. Enzyme preparations of microbial origin, which can be obtained from the studied strain, have unique properties (efficiency and specificity of action, non-toxicity, ability to work in mild conditions, to process various raw materials of plant and animal origin), in connection with which their use in industry will be profitable from the economic and ecological point of view. [ABSTRACT FROM AUTHOR]

The remarkable physicochemical properties of nanomaterials have attracted researchers due to the numerous applications in the field of chemistry, biology, and physics. Despite the various applications, superparamagnetic iron oxide nanoparticles (SPIONs) are harmful to living organisms and to the environment as they are released without any safety testing. In this study, SPIONs were synthesized and further characterized. The aim of the study was to examine the toxicity of synthesized SPIONs against animal models: Zebrafish—Danio rerio, Earthworm—Eudrilus eugeniae, and Drosophila—Drosophila melanogaster through histology using Hematoxylin–Eosin and Prussian Blue staining. The accumulation of SPIONs was further quantified by using Inductively Coupled Plasma Mass Spectrometry (ICP-MS). Through histology images, it was observed that the SPIONs had caused damages and a lower concentration of 0.001–0.002 μg/ml of metal accumulation was detected in the ICP-MS analysis. [ABSTRACT FROM AUTHOR]

Zea mays L. Poaceae stigma (corn silk, CS) is a byproduct of agricultural waste and is used as a traditional herb in many countries. CS is rich in chemical compounds known to benefit human health and is also a remedy for infectious diseases and has anti-proliferative effects on human cancer cell lines. In the present study, CS extract has been evaluated for its antioxidant, antibacterial, and anti-tyrosinase activities and its phytochemical composition. The higher total phenolic and flavonoid contents were found in the ethanolic extract of corn silk (CSA), at 28.27 ± 0.86 mg gallic acid equivalent/g extract and 4.71 ± 0.79 mg quercetin equivalent/g extract, respectively. Moreover, the antioxidant content of CSA was found at 5.22 ± 0.87 and 13.20 ± 0.42 mg gallic acid equivalent/g extract using DPPH and reducing power assays. Furthermore, the ethanolic extract of corn silk showed tyrosinase inhibition with an IC50 value of 12.45 µg/mL. The bacterial growth inhibition of CSA was tested using agar disc diffusion and broth dilution assays against Cutibacterium acnes and Staphylococcus epidermidis. It was found that CSA inhibited C. acnes and S. epidermidis with an inhibition zone of 11.7 ± 1.2 and 9.3 ± 0.6 mm, respectively. Moreover, the CSA showed MIC/MBC of 15.625 mg/mL against C. acnes. The following phytochemical compounds were detected in CSA: cardiac glycosides; n-hexadecanoic acid; hexadecanoic acid, ethyl ester; oleic acid; and 9,12-octadecadienoic acid, ethyl ester. After the corn silk cream product was formulated, the product demonstrated stability without phase separation. This research is beneficial for promoting effective ways to use agricultural waste while utilizing the antioxidant, anti-tyrosinase, and antibacterial activities of corn silk. Moreover, the use of technology and innovation to obtain high-value CS extract will benefit the development of commercial cosmetic products by providing safe, natural, and quality ingredients to the consumer. [ABSTRACT FROM AUTHOR]

Terminalia catappa L., which is also known as Indian almond, tropical almond, and ketapang, belongs to the family of Combretaceae and it forms layers of canopy, which provides shade to locals. The parts of the plant such as bark, fruit, leaf, rhizomes, and roots have been traditionally used in folk medicines for several treatment purposes, demonstrating its numerous biological activities. The current study evaluated phytochemical constituents in its leaf responsible for its biology activities and toxicity analysis by brine shrimp lethality test for ethanolic leaf extract of T. catappa L. (EKLE) to set a safe limit for future applications in studies. Phytochemical compounds such as squalene, phytol, DL-a-tocopherol, ß-sitosterol, stigmasterol, a-amyrin, and ß-amyrin were identified in EKLE through GC-MS analysis, which is believed to contribute to its biology activities such as antibacterial. This is the first time to report ß-sitosterol in the leaf of T. catappa L., though previous studies have reported in the bark of the tree and other parts of its genus. This is the first time to identify ß-amyrin in this tree. The LC50 value in the brine shrimp assay was above 100 µg/mL, suggesting the extract is biologically safe and non-toxic for humans. However, the application of the extract shall not be more than 11.61 mg/mL. [ABSTRACT FROM AUTHOR]

More than 80% of the energy from fossil fuels is utilized in homes and industries. Increased use of fossil fuels not only depletes them but also contributes to global warming. By 2050, the usage of fossil fuels will be approximately lower than 80% than it is today. There is no yearly variation in the amount of CO2 in the atmosphere due to soil and land plants. Therefore, an alternative source of energy is required to overcome these problems. Biohydrogen is considered to be a renewable source of energy, which is useful for electricity generation rather than relying on harmful fossil fuels. Hydrogen can be produced from a variety of sources and technologies and has numerous applications including electricity generation, being a clean energy carrier, and as an alternative fuel. In this review, a detailed elaboration about different kinds of sources involved in biohydrogen production, various biohydrogen production routes, and their applications in electricity generation is provided. [ABSTRACT FROM AUTHOR]

Corn silk, the yellowish thread-like strands, is a waste material from corn cultivation. Corn silk bioactive components such as polyphenols and flavonoids provide benefits that can be tapped as potential natural anti-oxidant product for healthcare applications. The study aimed to determine the effect of different drying methods on colour parameters and that of different extraction solvents on total polyphenols, flavonoids and anti-oxidant activity of corn silk. Corn silk samples were either lyophilized or tray-dried at 40 and 60°C. Bioactive compounds from powdered corn silk sample were extracted using 80 per cent ethanol, methanol, water or acetone. Colour analysis revealed that tray drying caused more browning of the sample compared to lyophilizing. Significantly higher (p < 0.05) Total phenolic content (TPC) and Total flavonoid content (TFC) were observed in 80 per cent ethanolic extract of lyophilized sample (35.86 ± 0.83 mg GAE and 38.05 ± 0.22 mg RE/g sample) followed by 60°C (20.31 ± 0.19 mg GAE and 20.56 ± 0.32 mg RE/g sample) and 40°C (5.68 ± 0.04 mg GAE and 8.88 ± 0.02 mg RE/g sample) tray dried sample. In line with this, antioxidant activities by DPPH (2,2-diphenyl-1-picryl-hydrazyl), ABTS+(azinobistetrazolium sulfate cation) and FRAP (Ferric ion reducing antioxidant power) models, were also respectively affected by drying methods. TPC, TFC and antioxidant capacity was found to be in decreasing order with the corresponding solvents used: 80 per cent ethanol > methanol > aqueous > acetone. Correlation analysis presented a significantly positive correlation (p< 0.01) of antioxidant activity with TPC and TFC. The study revealed that lyophilization was the most effective drying method with highest yield of bioactive compounds in 80 per cent ethanol as the solvent. The results provide the evidence required for utilization of corn silk as a potential source of natural antioxidants. [ABSTRACT FROM AUTHOR]

The use of polysaccharides with good film-forming properties in food packaging systems is a promising area of research. Xanthan gum (XG), an extracellular polysaccharide, has many industrial uses, including as a common food additive (E415). It is an effective thickening agent, emulsifier, and stabilizer that prevents ingredients from separating. Nevertheless, XG-based polymer films have some disadvantages, such as poor mechanical properties and high hydrophilic features, which reduce their stability when exposed to moisture and create difficulties in processing and handling. Thus, the objective of this work was to stabilize a XG matrix by cross-linking it with glycerol diglycidyl ether, 1,4-butanediol diglycidyl ether, or epichlorohydrin below the freezing point of the reaction mixture. Cryogelation is an ecological, friendly, and versatile method of preparing biomaterials with improved physicochemical properties. Using this technique, XG-based cryogels were successfully prepared in the form of microspheres, monoliths, and films. The XG-based cryogels were characterized by FTIR, SEM, AFM, swelling kinetics, and compressive tests. A heterogeneous morphology with interconnected pores, with an average pore size depending on both the nature of the cross-linker and the cross-linking ratio, was found. The use of a larger amount of cross-linker led to both a much more compact structure of the pore walls and to a significant decrease in the average pore size. The uniaxial compression tests indicated that the XG-based cryogels cross-linked with 1,4-butanediol diglycidyl ether exhibited the best elasticity, sustaining maximum deformations of 97.67%, 90.10%, and 81.80%, respectively. [ABSTRACT FROM AUTHOR]

Nanofiber scaffolds have emerged as a revolutionary drug delivery platform for promoting wound healing, due to their unique properties, including high surface area, interconnected porosity, excellent breathability, and moisture absorption, as well as their spatial structure which mimics the extracellular matrix. However, the use of nanofibers to achieve controlled drug loading and release still presents many challenges, with ongoing research still exploring how to load drugs onto nanofiber scaffolds without loss of activity and how to control their release in a specific spatiotemporal manner. This comprehensive study systematically reviews the applications and recent advances related to drug-laden nanofiber scaffolds for skin-wound management. First, we introduce commonly used methods for nanofiber preparation, including electrostatic spinning, sol–gel, molecular self-assembly, thermally induced phase separation, and 3D-printing techniques. Next, we summarize the polymers used in the preparation of nanofibers and drug delivery methods utilizing nanofiber scaffolds. We then review the application of drug-loaded nanofiber scaffolds for wound healing, considering the different stages of wound healing in which the drug acts. Finally, we briefly describe stimulus-responsive drug delivery schemes for nanofiber scaffolds, as well as other exciting drug delivery systems. [ABSTRACT FROM AUTHOR]

The intended circular economy for plastics envisages that they will be partially replaced by bio-based polymers in the future. In this work, the natural polyester polyhydroxybutyrate (PHB) was produced by Azohydromonas lata using cheese whey (CW) as a low-cost substrate. Initially, CW was evaluated as the sole carbon source for PHB production; it was found to be efficient and comparable to PHB production with pure sugars, such as saccharose or glucose, even when mild (with dilute acid) hydrolysis of cheese whey was performed instead of enzymatic hydrolysis. An additional series of experiments was statistically designed using the Taguchi method, and a dual optimization approach was applied to maximize the intracellular biopolymer content (%PHB, selected as a quantitative key performance indicator, KPI) and the weight average molecular weight of PHB (Mw, set as a qualitative KPI). Two different sets of conditions for the values of the selected bioprocess parameters were identified: (1) a carbon-to-nitrogen ratio (C/N) of 10 w/w, a carbon-to-phosphorous ratio (C/P) of 1.9 w/w, a dissolved oxygen concentration (DO) of 20%, and a residence time in the stationary phase (RT) of 1 h, resulting in the maximum %PHB (61.66% w/w), and (2) a C/N of 13.3 w/w, a C/P of 5 w/w, a DO of 20%, and a RT of 1 h, leading to the maximum Mw (900 kDa). A final sensitivity analysis confirmed that DO was the most significant parameter for %PHB, whereas C/N was the most important parameter for Mw. [ABSTRACT FROM AUTHOR]

The disposal of keratinous wastes produced by several leather industries is evolving into a global problem. Around 1 billion tonnes of keratin waste are released into the environment each year. In the breakdown of tannery waste, certain enzymes, such as keratinases produced from microorganisms, might be a better substitute for synthetic enzymes. Keratinase enzymes are able to hydrolyze gelatin, casein, bovine serum albumin and insoluble protein present in wool, feather. Therefore, in this study, bacterial strains from tannery effluent-contaminated soil and bovine tannery hide were isolated and assessed for their ability to produce the keratinolytic enzyme. Among the six isolates, the strain NS1P showed the highest keratinase activity (298 U/ml) and was identified as Comamonas testosterone through biochemical and molecular characterization. Several bioprocess parameters such as pH, temperature, inoculum size, carbon sources, and nitrogen sources were optimized in order to maximize crude enzyme production. The optimized media were used for inoculum preparation and subsequent biodegradation of hide hairs. The degradation efficacy of the keratinase enzyme produced by Comamonas testosterone was examined by degrading bovine tannery hide hairs, and it was found to be 73.6% after 30 days. The morphology of the deteriorated hair was examined using a field emission scanning electron microscope (FE-SEM), which revealed significant degradation. Thus, our research work has led to the conclusion that Comamonas testosterone may be a promising keratinolytic strain for the biodegradation of tannery bovine hide hair waste and the industrial production of keratinases. [ABSTRACT FROM AUTHOR]

Corn silk (CS) extracts are reported to contain flavonoids (appx. 59.65 mg quercetin/g), polysaccharides (appx. 58.75 w.%), steroids (appx. 38.3 × 10−3 to 368.9 × 10−3 mg/mL), polyphenols (appx. 77.89 mg/GAE/g) and other functional biological substances. This study investigated the antioxidant activity of corn silk extracts related to their functional compounds. The radical scavenging effect of corn silk extracts was evaluated by the spin-trapping electron paramagnetic resonance (EPR) technique, 1,1-diphenyl-2-picrylhydrazyl (DPPH), 2,2′-azino-bis(3-ethylbenzo-thiazoline-6-sulfonate) (ABTS•+) free radical measurement, ferric ion-reducing antioxidant power, and copper ion reductive capacity. It was found that the maturity stage of CS plant materials and the applied extraction procedure of their bioactive compounds have a profound effect on the radical scavenging capacity. Differences in the antioxidant activity of the studied corn silk samples based on their maturity were also confirmed. The strongest DPPH radical scavenging effect was observed for the corn silk mature stage (CS-M)stage (CS-MS) (65.20 ± 0.90)%, followed by the silky stage (CS-S) (59.33 ± 0.61)% and the milky stage (CS-M) (59.20 ± 0.92)%, respectively. In general, the final maturity stage (CS-MS) provided the most potent antioxidant effect, followed by the earliest maturity stage (CS-S) and the second maturity stage (CS-M). [ABSTRACT FROM AUTHOR]

Valorization of chicken feather is a long‐sought approach for its sustainable disposal. Being protein rich, hydrolyzed chicken feather has a wide range of applications, not limited to formulation of microbiological culture media, animal feed, and biofertilizers, but extends to synthesis of bioplastic films, cosmetics, and biomedicals. In this study, a potent keratinolytic isolate was recovered from soil and identified by 16S rRNA as Bacillus thuringiensis. Feather degradation by the isolate was optimized through response surface methodology. First, one‐variable‐at‐a‐time technique to assign the factors that affect feather degradation, then Box–Behnken central composite design model were employed. The model, involving three independent variables (initial pH, inoculum size, and concentration of supplementary glucose), was significant (R2 = 0.9716). According to the model, complete feather degradation is obtained at an inoculum size of B. thuringiensis B4 equal to 1 × 1010 CFU/ml, when feather meal broth is supplemented with 1.5% (w/v) glucose and pH adjusted to 8.5. Protein content of the lysate was 327.8 ± 25 μg/ml, and no carbohydrates were detected. SEM/EDX analysis has shown that the hydrolysate consisted mainly of O, P, S, and Se in addition to carbon, while FTIR images assured the presence of carboxyl and amino groups characteristic of peptides and amino acids. [ABSTRACT FROM AUTHOR]

Dextran methacrylate (Dex-MA) is a biodegradable polysaccharide derivative that can be cross-linked by ionizing radiation. It is therefore considered a potential replacement for synthetic hydrophilic polymers in current radiation technologies used for synthesizing hydrophilic cross-linked polymer structures such as hydrogels, mainly for medical applications. This work is focused on the initial steps of radiation-induced cross-linking polymerization of Dex-MA in water. Rate constants of two major transient water radiolysis products—hydroxyl radicals (•OH) and hydrated electrons ( e aq − )—with various samples of Dex-MA (based on 6–500 kDa dextrans of molar degree of substitution or DS with methacrylate groups up to 0.66) as well as non-substituted dextran were determined by pulse radiolysis with spectrophotometric detection. It has been demonstrated that these rate constants depend on both the molecular weight and DS; reasons for these effects are discussed and reaction mechanisms are proposed. Selected spectral data of the transient species formed by •OH- and e aq − -induced reactions are used to support the discussion. The kinetic data obtained in this work and their interpretation are expected to be useful for controlled synthesis of polysaccharide-based hydrogels and nanogels of predefined structure and properties. [ABSTRACT FROM AUTHOR]

Corn silk, the major byproduct obtained after corn processing, is collected in large quantities and dumped as an agricultural waste. Corn silk, scientifically known as Maydis stigma, has a morphological characteristic of thread-like structures interlinked with the ear of corn. Traditionally, it has been used to treat various disorders owing to its pharmacological properties viz. antioxidant, anti-diabetic, anti-fatigue and anti-inflammatory effect. Corn silk is nutritionally rich in carbohydrates, protein, fibre and bioactive compounds namely, flavonoids, phenolic acids, flavones, volatile oils, pigments etc. which favours its incorporation in therapeutic foods to prevent chronic illness. The utilization of corn silk will contribute to enhance overall health, increase farmers' economy and can be promoted as a value-added functional food product. The current review focuses on the varietal difference in nutritional composition and phytochemical composition, health-promoting properties and its utilization. Recent findings discussed in the current review validate the utilization of corn silk despite si being a waste, in food-grade, cosmetics, or as herbal medicine and henceforth, offer numerous opportunities to develop functional and therapeutic value-added food products. [ABSTRACT FROM AUTHOR]

The global cancer incidence and its high mortality rate indicate limitations in its current treatment and chemotherapeutic strategies. This sparked a worldwide interest in the demand for chemical diversity in searching for therapeutic drugs derived from natural products. Natural products from medicinal plants, whether as pure compounds or crude extracts, offer inexhaustible sources of new drugs because of their unparalleled chemical diversity. This review aims to disseminate detailed information on the anticancer potential of Malaysian medicinal plants, focusing on the bioactive phytochemicals and mechanisms of action against cancer development in both in vitro and in vivo studies. A comprehensive search of PubMed, Google Scholar, Scopus, and ScienceDirect databases was conducted to find relevant articles on the anticancer activity of Malaysian medicinal plants. A total of hundred and twenty-two (122) articles on the anticancer activity of Malaysian medicinal plants was identified and reviewed. Eighty-five (85) plants (in vitro) and 16 plants (in vivo) have been identified to possess anticancer activity. The activity reported was attributed primarily to diverse chemical groups of naturally occurring phytochemicals such as flavonoids, phenolics, glycosides, quercetin, and gallic acid. Henceforth, the findings will hope to aid further research in understanding the underlaying mechanism and the efficiency of the isolation of the bioactive compounds. [ABSTRACT FROM AUTHOR]

Nanotechnology is used in a variety of scientific, medical, and research domains. It is significant to mention that there are negative and severe repercussions of nanotechnology on both individuals and the environment. The toxic effect of nanoparticles exerted on living beings is termed as nanotoxicity. Nanoparticles are synthesized by various methods such as chemical, biological, physical, etc. These nanoparticles' nanotoxicity has been observed to vary depending on the synthesis process, precursors, size of the particles, etc. Nanoparticles can enter the cell in different ways and can cause cytotoxic effects. In this review, the toxicity caused in the reproductive system and the role of the antioxidants against the nanotoxicity are briefly explained. [ABSTRACT FROM AUTHOR]

Biogenic nanoparticles (NPs) have emerged as promising therapeutic formulations in effective drug delivery. Despite of various positive attributes, these NPs are often conjugated with various cytotoxic organic fluorophores for bioimaging, thereby reducing its effectiveness as a potential carrier. Herein, we aim to formulate biogenic fluorescent pigmented polyhydroxybutyrate (PHB) NPs from Rhodanobacter sp. strain KT31 (OK001852) for drug delivery. The bacterial strain produced 0.5 g L -1 of polyhydroxyalkanoates (PHAs) from 2.04 g L -1 of dry cell weight (DCW) under optimised conditions via submerged fermentation. Further, structural, thermal, and morphological charactersiation of the extracted PHAs was conducted using advance analytical technologies. IR spectra at 1719.25 cm -1 confirmed presence of C = O functional group PHB. NMR and XRD analysis validated the chemical structure and crystallinity of PHB. TG-DTA revealed Tm (168 °C), Td (292 °C), and Xc (35%) of the PHB. FE-SEM imaging indicated rough surface of the PHB film and the biodegradability was confirmed from open windro composting. WST1 assay showed no significant cell death (> 50%) from 100 to 500 µg/mL, endorsing non-cytotoxic nature of PHB. PHB NPs were uniform, smooth and spherical with size distribution and mean zeta potential 44.73 nm and 0.5 mV. IR and XRD peaks obtained at 1721.75 cm -1 and 48.42 Å denoted C = O and crystalline nature of PHB. Cell proliferation rate of PHB NPs was quite significant at 50 µg/mL, establishing the non-cytotoxic nature of NPs. Further, in vitro efficacy of the PHB NPs needs to be evaluated prior to the biomedical applications., (© 2024. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

Microbial fuel cells (MFCs) have gained considerable importance for the production of bioelectricity and other value-added products recovery along with the concomitant treatment of wastewater. However, the poor power output of MFC as a result of sluggish oxygen reduction reaction (ORR) remains one of the major setbacks of this green technology. Application of metal composite as cathode catalyst has shown tremendous potential in this regard to the augmentation of power generation through MFC. Thus, this review article pivots around the role of bimetallic catalysts in boosting the ORR and critically evaluates different metal composites employed in lab-scale as well as field-scale MFCs chiefly in terms of power generation. In this regard, bimetallic catalyst such as Cu-Sn have shown the maximum power density of 470.2 ± 27.3 mW/m2 and coulombic efficiency of 36.4 ± 2.1% compared to the power density obtained by the MFC with Pt/C as cathode catalyst (465.3 ± 27.1 mW/m2), which shows that bimetallic catalysts possess excellent ORR activity and are more sustainable with respect to expensive Pt based catalyst. Similarly, Cu–Zn bimetallic catalysts have shown the competence for application in both lab- and field-scale. Moreover, the effect of synthesis procedure, structural morphology, and electrochemical behavior of bimetallic catalysts has been scrutinized and summarized in this review. Therefore, this review is an attempt to fill the existing knowledge void on composite metal catalysts and would aid budding scholars in carrying out influential research work in the future. [ABSTRACT FROM AUTHOR]