Search

Carob pulp is a valuable source of cellulose-rich fraction (CRF) for many food applications. This study aimed to obtain and characterize a CRF derived from carob pulp waste after sugar removal and to evaluate its potential use in the 3D printing of cellulose-rich foods. Thus, the extraction of the CRF present in carob pulp (by obtaining the alcohol-insoluble residue) was carried out, accounting for nearly 45% dm (dry matter) of this byproduct. The CRF contained about 24% dm of cellulose. The functional properties (swelling capacity, water retention, and fat adsorption) related to this fraction were determined, showing a value of 5.9 mL/g of CRF and 4.0 and 6.5 g/g of CRF, respectively. Different gels were formulated with a total solids content of 15% wm (wet matter), using potato peel flour as a base and partially substituting with CRF (0% to 8% wm). The cellulose-based gels were characterized in terms of viscosity, water distribution (low-field Nuclear Magnetic Resonance), and printability, while the 3D printed samples were assessed for their textural properties. As the percentage of added CRF increased, the viscosity decreased while the water retention increased. Printability improved when small proportions of CRF (2% to 4%) were used, while it deteriorated for higher percentages (6% to 8%). The textural properties (hardness, adhesiveness, cohesiveness, and gumminess) showed significant changes caused by the addition of CRF, with gels containing 3% to 4% CRF exhibiting the most suitable printing values. In summary, this study demonstrates the significant potential of carob cellulose-based gel as an ingredient in the 3D printing of novel fiber-rich foods, contributing to reducing food waste and promoting sustainable practices within the framework of the circular economy.

This article explores the use of citrus residues as a source of different pectic materials for packaging film production: a water-soluble orange residue extract (WSE) (~5% pectin), semi-pure pectins extracted in citric acid (SP) (~50% pectin), and commercial pure citrus pectins (CP). First, these materials were characterized in terms of chemical composition. Then, films were produced using them pure or mixed with chitosan or glycerol through solvent-casting. Finally, antioxidant activity, functional properties (e.g., mechanical and gas barrier properties), and visual appearance of the films were assessed. WSE films showed the highest antioxidant activity but the lowest mechanical strength with the highest elongation at break (EB) (54%); incorporating chitosan increased the films' strength (Young's modulus 35.5 times higher). SP films showed intermediate mechanical properties, reinforced by chitosan addition (Young's modulus 4.7 times higher); they showed an outstanding dry O 2 barrier. CP films showed a similar O 2 barrier to SP films and had the highest Young's modulus (~29 MPa), but their brittleness required glycerol for improved pliability, and chitosan addition compromised their surface regularity. Overall, the type of pectic material determined the film's properties, with less-refined pectins offering just as many benefits as pure commercial ones.

The impact of cryogenic pretreatments on drying performance was studied in blueberries, seabuckthorn fruits and green grapes. The fruits were immersed in liquid nitrogen in 2 min freezing/thawing cycles (one to five). Untreated samples were used as the control. Drying experiments were carried out on treated and non-treated berries at 50 °C and 1 m/s (hot-air-drying), 50 °C and 25″ Hg vacuum (vacuum-drying), 30 mTorr total pressure and 25 °C shelf temperature (freeze-drying). The weight loss evolution of the foodstuffs was measured as a function of time. Microscopic (SEM and optical) determinations of the epicarp were performed. A visual inspection was performed and color changes and volume reductions were assessed before and after dehydration. The thickness of the berries' epicarp decreased between 20 and 50% (depending on the fruit) after 3-5 immersions in liquid N2. The drying kinetics was accelerated significantly for the three tested drying processes (i.e., drying time decreased from 48 to 16 h for blueberry freeze-drying). The best quality of dried berries was observed for pretreated blueberries after freeze-drying, keeping their volume, shape and color after the process. This work shows that "tailor-made" dried berry products with desired properties can be achieved and drying performance can be improved by the application of ultra-low temperature pretreatments.

Purpose: Neoadjuvant clinical trials with dual HER2 blockade with pertuzumab and trastuzumab plus chemotherapy demonstrated high rates of pathological complete response (pCR) in HER2-positive early breast cancer (BC). We investigated whether the benefit on pCR seen in clinical trials is confirmed in a real-world setting., Methods: Multicenter, retrospective study in patients with HER2-positive early BC receiving neoadjuvant treatment with pertuzumab and trastuzumab in routine clinical practice (n = 243). The primary endpoint was total pCR (tpCR) (ypT0/is ypN0)., Results: A total of 243 evaluable patients were included. Pertuzumab and trastuzumab were combined with anthracyclines and taxanes in 74.1% of patients, with single-agent taxane in 11.1% of patients and with platinum-based chemotherapy (CT) in 14.4% of patients. The tpCR rate was 66.4%:71% with anthracyclines and taxanes, 59.3% with single-agent taxane, and 48.6% with platinum-based combinations. The tpCR rate was higher among patients with hormone receptor (HR)-negative tumors (80.9%) vs HR-positive tumors (55.4%) (p < 0.001). A pCR in the breast (ypT0/is) was achieved in 67.6% of patients. Of 143 patients who showed radiological complete response (rCR) (62%), 112 (78.3%) patients also achieved tpCR. Assessment of rCR by magnetic resonance imaging (MRI) showed the highest negative predictive value (NPV) for predicting tpCR (83.5%). Breast-conserving surgery was performed in 58.7% of patients. Grade 3 and grade 4 toxicities were reported in 33 (18.2%) and 12 (6.6%) patients, respectively. No toxicity leading to death was reported., Conclusions: This real-world analysis shows that neoadjuvant pertuzumab, trastuzumab, and chemotherapy achieve comparable or even higher rates of tpCR than those seen in clinical trials. The pCR benefit is higher in HR-negative tumors. The assessment of rCR by MRI showed the highest ability for predicting pCR. In addition, this neoadjuvant strategy confers an acceptable safety profile.

Orange byproduct (flavedo and albedo) from juice extraction, was used as raw material for this study. Kinetics of total phenolic and total flavonoid contents and antioxidant activity was experimentally determined during both conventional (agitation at 80 rpm) and ultrasound assisted (at 520 and 790 W/L) aqueous extraction from orange byproduct at 5, 15, and 25 °C. An extraction mathematical model was also developed. Significant increase of biocompounds extraction yields was observed as temperature and acoustic power density increased. Ultrasound assistance allowed higher yields at lower temperatures and shorter times. Yields of total phenolic and total flavonoid contents and antioxidant activity obtained with ultrasound extraction (790 W/L, 25 °C, 3 min) were 29%, 39%, and 197% higher, respectively, than those obtained by conventional extraction. The extraction kinetics curves were properly represented by the Weibull model for both conventional and acoustic extraction (mean relative error lower than 5%). Naringin, neohesperidin, and hesperidin were the main phenolic compounds found in the extracts, followed by ferulic, sinapic, and cuomaric acids. Neohesperidin, hesperidin, coumaric acid, and sinapic acid presented the highest yields, especially when extraction was assisted by ultrasound. Meanwhile, naringin and ferulic acid were extracted in a lesser extent, most likely due to their lipophilic character.

Background: Imaging the lower extremity reproducibly and accurately remains an elusive goal. This is particularly true in the high risk diabetic foot, where tissue loss, edema, and color changes are often concomitant. The purpose of this study was to evaluate the reproducibility of a novel and inexpensive stereotaxic frame in assessment of wound healing., Methods: The main idea is to keep constant and reproducible the relative position of extremities related to the sensor used for the examination during a serial studies by stereotaxic digital photographic sequence. Ten healthy volunteers were evaluated at 10 different time moments to estimate the foot position variations in the stereotaxic frame. The evolution of 40 of DFU patients under treatment was evaluated before and during the epidemical grow factor intralesional treatment., Results: The wound closing and granulation speeds, the relative contribution of the contraction and tissue restauration mechanism were evaluated by stereotaxic digital photography., Conclusions: The results of this study suggest that the stereotaxic frame is a robust platform for serial study of the evolution of wound healing which allow to obtain consistent information from a variety of visible and hyperspectral measurement technologies. New stereotaxic digital photography evidences related to the diabetic foot ulcer healing process under treatment has been presented.

Copyright of Redes (1414-7106) is the property of Associacao Pro-Ensino em Santa Cruz do Sul - APESC and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Purpose: The present study aims to determine any existing association between airway dimensions, measured with cone beam computed tomography (CBCT), and the different patient craniofacial morphologies., Material and Methods: Sixty CBCT (Dental Picasso Master 3D) images, from patients treated at the Orthodontics Master at Valencia University were selected. The program InVivoDental 5.1 was used to visualize sections, analyze three-dimensional images, and perform airway measurements in the three planes of the space. Intra- and interobserver error methods were recorded. After that, measurements at three different levels of the airway (upper, medium, lower) were taken, in both the anteroposterior and transversal directions of the airway space. The area (mm(2)) of the airway space at the three levels was also measured., Results: In the anteroposterior airway measurements, there were differences between the measurements by level. The magnitude of these differences depended on the skeletal pattern of the individual. In the transversal airway measurements and in the area airway measurements, there were no differences according to the skeletal pattern. However, in the transversal direction, measurements in the lower level were significantly higher than in the superior level in all cases. When measuring the area, significantly higher measurements in the upper level were recorded. The homogeneity between medium and lower levels decreased gradually from class I to class III subjects., Conclusions: No statistically significant results were observed that related the anteroposterior and vertical skeletal craniofacial morphology with airway dimensions, although some specific associations have been detected for certain airway levels or for pattern combinations., (Copyright © 2015 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.)

This study aimed to isolate, purify, and characterize a lipase from the gut symbiont Bacillus megaterium F25 (GenBank accession: MF597792) of the aquatic insect Rhantus suturalis, with a focus on its potential applications in biodiesel and food industries. Under optimized culture conditions, B. megaterium F25 could produce 583 U/L of lipase in shaking flask culture. The purified lipase (PL) exhibited a specific activity with 113.89 U/mg, and its molecular weight was determined as 34 kDa. The activity of PL was enhanced by methanol, ethanol, Tween‐80, Triton X‐100, Ca2+, and Mg2+, while β‐mercaptoethanol, EDTA, SDS, Fe2+, Mn2+, and Cu2+ were inhibitory. PL showed optimal activity and stability at neutral and slightly acidic pHs, as well as in a temperature range of 20°C–30°C. PL displayed strong hydrolytic activity toward plant oils and animal fats, indicating its potency for both the food industry and the remediation of oil‐contaminated environments. When tested as a catalyst, PL provided biodiesel production with a transesterification yield of 86.8% under optimized conditions (36 h reaction time, 4 mL enzyme solution, 30°C, pH 7.0, and waste cooking oil:methanol ratio of 10 mL/40 mL). This is the first report on the lipase‐producing potential of gut microbial symbionts of aquatic insects. Furthermore, B. megaterium lipase was tested for the first time as a biocatalyst for biodiesel production. [ABSTRACT FROM AUTHOR]