Search

Background: Increased femoral anteversion (FAV) is crucial in the genesis of anterior knee pain (AKP) and a femoral derotational osteotomy (FDO) has demonstrated good clinical results. It remains unclear at what level of the femur the osteotomy should be performed. Resulting degrees of FAV measured by Murphy's method do not always correspond to the degrees that had been planned after an FDO. The hypothesis of this study is that the femur rotation axis and the osteotomy rotation axis do not coincide. Three-dimensional (3D) technology is used to objectify the discrepancy between these two axes and to find solutions so that the two axes can coincide. The objective is to demonstrate the reliability and reproducibility of the 3D technique for osteotomy adjustment through an intraobserver and interobserver study., Methods: Images of eight computed tomography scans of the femur, corresponding to seven patients with a diagnosis of AKP and increased FAV, were selected. Two surgeons performed the FAV measurement and simulation of FDO on 3D biomodels. The femoral osteotomies were defined at three levels, at 10°, 20°, 30°. To determine interobserver agreement, measurements were performed independently by two surgeons. To evaluate intraobserver differences each surgeon repeated all measurements after 15 days., Results: Interobserver and intraobserver agreement: intraclass correlation coefficient 0.930 (95% confidence interval (CI) 0.799-0.975) and 0.986 (95% CI 0.959-0.995). Significant differences between the resulting values were observed when the osteotomy was performed at the intertrochanteric level., Conclusions: The misalignment of the axes results in hypocorrection when the osteotomy is intertrochanteric. This phenomenon is not observed when the osteotomy is diaphyseal or supracondylar., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Introduction: Increased femoral anteversion (FAV) can have many clinical manifestations, including anterior knee pain (AKP). To our knowledge, no studies have measured the location of FAV in a cohort of female AKP patients. The objective of this research is to determine whether the increased FAV in AKP females originates above the lesser trochanter, below the lesser trochanter or at both levels., Materials and Methods: Thrity-seven consecutive AKP female patients (n = 66 femurs) were recruited prospectively. There were 17 patients (n = 26 femurs; mean age of 28 years) in whom the suspicion for the increased FAV of the femur was based on the clinical examination (pathological group-PG). The control group (CG) consisted of 20 patients (n = 40 femurs; mean age of 29 years) in whom there was no increased FAV from the clinical standpoint. All of them underwent a torsional computed tomography of the lower limbs. FAV was measured according to Murphy´s method. A segmental analysis of FAV was performed using the lesser trochanter as a landmark., Results: Significant differences in the total FAV (18.7 ± 5.52 vs. 42.46 ± 6.33; p < 0.001), the neck version (54.88 ± 9.64 vs. 64.27 ± 11.25; p = 0.0006) and the diaphysis version (- 36.17 ± 8.93 vs. - 21.81 ± 11.73; p < 0.001) were observed between the CG and the PG. The difference in the diaphyseal angle between CG and PG accounts for 60% of the total difference between healthy and pathological groups, while the difference between both groups in the angle of the neck accounts for 40%., Conclusion: In chronic AKP female patients with increased FAV, the two segments of the femur contribute to the total FAV, with a different pattern among patients and controls, being the compensation mechanism of the diaphysis much lower in the pathological femurs than in the controls., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Anterior knee pain (AKP) is a common pathology among adolescents and adults. Increased femoral anteversion (FAV) has many clinical manifestations, including AKP. There is growing evidence that increased FAV plays a major role in the genesis of AKP. Furthermore, this same evidence suggests that derotational femoral osteotomy is beneficial for these patients, as good clinical results have been reported. However, this type of surgery is not widely used among orthopedic surgeons. The first step in attracting orthopedic surgeons to the field of rotational osteotomy is to give them a methodology that simplifies preoperative surgical planning and allows for the previsualization of the results of surgical interventions on computers. To that end, our working group uses 3D technology. The imaging dataset used for surgical planning is based on a CT scan of the patient. This 3D method is open access (OA), meaning it is accessible to any orthopedic surgeon at no economic cost. Furthermore, it not only allows for the quantification of femoral torsion but also for carrying out virtual surgical planning. Interestingly, this 3D technology shows that the magnitude of the intertrochanteric rotational femoral osteotomy does not present a 1:1 relationship with the correction of the deformity. Additionally, this technology allows for the adjustment of the osteotomy so that the relationship between the magnitude of the osteotomy and the correction of the deformity is 1:1. This paper outlines this 3D protocol.

A dynamic nuclear magnetic resonance study was made of the adamantylideneadamantane/Br2 system as a function of temperature and excess (Br2). Line shape analysis of the spectral region between delta 2.1 and 2.6 was used to investigate the bromine site exchange rate constants. The results indicated that the dynamic condition occurred through the rate-limiting dissociation of a 1:1 charge-transfer complex to liberate Ad=Ad + Br2.

Developing effective strategies to increase the chemical stability and to fine-tune the physico-chemical properties of melanin biopolymers by rational control of π-electron conjugation is an important goal in materials science for biomedical and technological applications. Herein we report that poly-1,8-dihydroxynaphthalene (pDHN), a non-nitrogenous, catechol-free fungal melanin mimic, displays a high degree of structural integrity (from MALDI-MS and CP/MAS 13 C NMR analysis), a strong radical scavenging capacity (DPPH and FRAP assays), and an unusually intense EPR signal (g=2.0030). Morphological and spectral characterization of pDHN, along with deassembly experiments in ionic liquids, indicated amorphous aggregates of small globular structures with an estimated stacking distance of 3.9 Å and broadband absorption throughout the visible range. These results indicate that DHN-based melanins exhibit a high structural integrity and enhanced antioxidant and free-radical properties of potentially greater biomedical and technological relevance than for typical indole-based eumelanins., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Four divalent ionic liquids based on imidazolium cations with alkyl or ether functionalized side-chains were synthesised and characterized: 3,3'-(tetraethyleneglycol-1,11-diyl)bis(1-methyl-1 H -imidazolium)bromide, [tetraEG(mim) 2 ][Br] 2 , 3,3'-(tetraethyleneglycol-1,11-diyl)bis(1-methyl-1 H -imidazolium)acetate, [tetraEG(mim) 2 ][OAc] 2 , 1-butyl-3-methylimidazolium malonate, [C 4 mim] 2 [Mal], and 3-butyl-1-methylimidazolium glutarate, [C 4 mim] 2 [Glut]. Their densities vary between 1.1 and 1.5 g cm -3 and their viscosities between 0.2 and 4 Pa s at 353 K. We found that the molar volumes are not additive, especially in the case of the divalent ionic liquids based on the double-charged imidazolium cations, meaning that they cannot be predicted using common group contribution methods. The reason for this behaviour could be explained by the structure of the cations, which is dominated by intramolecular hydrogen bonding. The carboxylate-based divalent ionic liquids absorb reversibly large quantities of carbon dioxide following a chemical mechanism described before. An improved 1 : 1 stoichiometry is achieved both in a double-charged imidazolium acetate ionic liquid and in imidazolium carboxylate salts with double charged anions. This behaviour places these ionic liquids amongst the best performing for carbon dioxide absorption.

Cannabis sativa L. is a multi-purpose crop, whose resilience, adaptability and soil-enriching properties make it a low-impact production. In the last years, the cultivation of the "industrial" hemp varieties (THC < 0.2%) has been promoted by many Countries, opening a whole new market of hemp-derived products, such as its essential oil (EO). Its distillation might represent an effective method to exploit a residue of the hemp fiber production (flowers), complying with the guidelines of the circular economy. In the present work, different concentrations of an ionic liquid (IL; 1,3-dimethyl-1H-imidazol-3-ium dimethylphosphate) have been studied as a pre-hydrodistillation maceration medium. The EO yields have been evaluated, and their compositions have been analyzed by GC-EIMS. The use of 100% and 90% IL concentrations gave a hydrodistillation yield increment of 250% and 200%, respectively. The 200% yield increase was maintained when the 100% IL was recycled after the hydrodistillation. The lower IL concentrations incremented the cannabinoid and oxygenated sesquiterpene contents, while the opposite was true for sesquiterpene hydrocarbons. The proposed IL-enhanced hydrodistillation medium applied to hemp, studied for the first time in the present work, might be used to both (i) noteworthy increment the hydrodistillation yield and (ii) modulate the obtained EO composition based on the desired final product.

The fungal pathways of melanin synthesis have so far been little considered as a source of bio-inspiration in the field of functional materials, despite the interesting properties exhibited by Ascomycetes melanins from 1,8-dihydroxynaphthalene (1,8-DHN), including the ability to shield organisms from ionizing radiation. Herein, the processing techniques and characterizations of mycomelanin thin films obtained from the solid state polymerization of 1,8-DHN is reported for the first time. Overall, the results highlighted the role of synthetic mycomelanin thin films as a prototype of next generation bioinspired interfaces featuring high structural regularity and ultrasmooth morphology, high robustness against peroxidative bleaching and adhesion under water conditions, good biocompatibility and unprecedented effects in inducing the spontaneous differentiation of embryonic stem cells prevalently towards the endodermal lineages in the absence of added factors. These data open up new avenues towards the applications of this biomaterial in the fields of tissue engineering and regenerative medicine.

This paper reports the results of a spectroscopic study on the chemistry of some small papyrus fragments arising from three Egyptian excavation sites. The aim of this investigation was to verify the possibility to identify significant differences in ancient Egyptian papyri using noninvasive analytical methods, that is, ATR (attenuated total reflection)-FTIR (Fourier transform infrared) spectroscopic imaging and scanning electron microscopy-energy-dispersive X-ray spectroscopy. Differences in both lignin and cellulose compositions, which are difficult to detect with traditional FTIR and FTIR imaging spectral analysis, were revealed by the multivariate approach, and the second derivative spectroscopy was applied to enhance the spectrum resolution. Thus, it has been possible to recognize a fragment characterized by the presence of lead and of long chain aliphatic organic compound, which are not present in the other fragments, in the ink region. These data show not only that the combination of these techniques can provide important chemical information, such as to evidence the different compositions and manufacture of each papyrus, but also that metal inks were probably used also in ancient Egyptian papyri., Competing Interests: The authors declare no competing financial interest., (Copyright © 2019 American Chemical Society.)

In order to identify most suitable ionic liquids (ILs) for potential applications in infection prevention and control, in the present study we comparatively evaluated the antimicrobial potency and hemolytic activity of 15 ILs, including 11 previously described and four newly synthesized ILs, using standard microbiological procedures against Gram-positive and Gram-negative bacteria. ILs showing the lowest minimum inhibitory concentration (MIC) were tested for their hemolytic activity. Three ILs characterized by low MIC values and low hemolytic activity, namely 1-methyl-3-dodecylimidazolium bromide, 1-dodecyl-1-methylpyrrolidinium bromide, and 1-dodecyl-1-methylpiperidinium bromide were further investigated to determine their minimum bactericidal concentration (MBC), and their ability to inhibit biofilm formation by Staphylococcus aureus or Pseudomonas aeruginosa. Killing kinetics results revealed that both Gram-positive and Gram-negative bacteria are rapidly killed after exposure to MBC of the selected ILs. Furthermore, the selected ILs efficiently inhibited biofilm formation by S. aureus or P. aeruginosa. To our knowledge, this is the first systematic study investigating the antimicrobial potential of different types of ionic liquids using standard microbiological procedures. In the overall, the selected ILs showed low hemolytic and powerful antimicrobial activity, and efficient inhibition of biofilm formation, especially against S. aureus, suggesting their possible application as anti-biofilm agents., (Copyright © 2019 Elsevier B.V. All rights reserved.)

New thiol-functionalized carboxylate ionic liquids (ILs), varying both for the cation and for the anion structures, have been prepared as new potential redox switching systems by reacting either 3-mercapto propionic acid (3-MPA) or N -acetyl-cysteine (NAC) with commercially available methyl carbonate ILs. Different ratios of thiol/disulfide ILs were obtained depending both on the acid employed in the neutralization reaction and on the reaction conditions used. Surprisingly, the imidazolium ILs displayed limited thermal stability which resulted in the formation of an imidazole 2-thione and a new sulfide ionic liquid. Conversely, the formation of the imidazole 2-thione was not observed when phosphonium disulfide ILs were heated, thus confirming the involvement of the imidazolium ring in an unexpected side reaction. An insight into the mechanism of the decomposition has been provided by means of DFT calculations.

Dicationic ionic liquids (DILs) are a subclass of the ionic liquid (IL) family and are characterized by two cationic head groups linked by means of a spacer. While DILs are increasingly attracting interest due to their peculiar physico-chemical properties, there is still a lack of understanding of their intermolecular interactions. Herein, we report our investigations on the intermolecular vibrational modes of two bromide DILs and of a bistriflimide DIL. The minimal possible neutral cluster of ions was studied as a simplified model of these systems and was optimized at the DFT level. Normal modes of two sandwich-like conformers were then calculated using the harmonic approximation with analytical computation of the second derivatives of molecular energy with respect to the atomic coordinates. The calculated spectra were compared to far-infrared experimental spectra and two groups of peaks over three, for the two bromide DILs, and three over five, for the Tf 2 N - DIL, were described by the proposed neutral cluster model. Therefore, this model represents a reliable and computationally affordable model for the exploration of the intermolecular interactions of this kind of system., Competing Interests: The authors declare that there is no conflict of interest regarding the publication of this article., (This journal is © The Royal Society of Chemistry.)

Carba analogues of biologically relevant natural carbohydrates are promising structures for the development of future drugs endowed with enhanced hydrolytic stability. An open synthetic challenge in this field is the optimization of new methodologies for the stereo- and regioselective opening of α-gluco carbasugar 1,2-epoxides that allow for the preparation of pseudo mono- and disaccharides of great interest. Therefore, we investigated the effect of Lewis acids and solvate ionic liquids (SILs) on the epoxide ring opening of a model substrate. Of particular interest was the complete stereo- and regioselectivity, albeit limited to simple nucleophiles, toward the desired C(1) isomer that was observed using LiClO 4 . The results obtained with SILs were also remarkable. In particular, Li[NTf 2 ]/tetraglyme ( [Li(G4)]TFSI ) was able to function as a Lewis acid and to direct the attack of the nucleophile preferentially at the pseudo anomeric position, even with a more complex and synthetically interesting nucleophile. The regioselectivity observed for LiClO 4 and [Li(G4)]TFSI was tentatively ascribed to the formation of a bidentate chelating system, which changed the conformational equilibrium and ultimately permitted a trans-diaxial attack on C(1). To the best of our knowledge, we report here the first case in which SILs were successfully employed in a ring-opening process of epoxides.

Nanoscale disassembly of mussel-inspired polydopamine (PDA) in ionic liquids (ILs) was recently shown to induce an electron paramagnetic resonance (EPR)-detectable reorganization of free radical centers in the resulting nanoparticles (NPs) in an IL-controlled manner. Herein, we report electrical impedance spectroscopy (EIS) data showing that PDA NPs produced by suspending samples obtained in Tris and bicarbonate buffer (PDA-T and PDA-C) in different ILs display different redox activity as a result of structural control combined with IL-surface interactions. In particular, susceptibility to oxidation was found to correlate closely with the spin density in an ion pair-tunable fashion in ILs. Structural control over free radical properties and redox behavior of PDA NPs in ILs opens novel perspectives for the rational design of functional nanovectors of possible interest for drug delivery and theranostic applications.

Selective and potent matrix metalloproteinase 12 (MMP-12) inhibitors endowed with improved hydrophilicity are highly sought for potential use in the treatment of lung and cardiovascular diseases. In the present paper, we modified the structure of a nanomolar MMP-12 inhibitor by incorporating an ionic liquid (IL) moiety to improve aqueous solubility. Four biologically active salts were obtained by linking the sulfonamide moiety of the MMP-12 inhibitor to imidazolium-, pyrrolidinium-, piperidinium-, and DABCO-based ILs. The imidazolium-based bioactive salt was tested on human recombinant MMPs and on monocyte-derived dendritic cells, showing activity similar to that of the parent compound, but improved water solubility. The imidazolium-based bioactive salt was then used to prepare electrostatically stabilized MMP inhibitor-coated gold nanoparticles (AuNPs) able to selectively bind MMP-12. These AuNPs were used to study subcellular localization of MMP-12 in monocyte-derived dendritic cells by transmission electron microscopy analysis., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Dicationic ionic liquids (DILs), a subset of the ionic liquid (IL) family, have attracted growing interest in recent years, and the range of applications within which they are investigated is constantly expanding. However, data which allows structure to property correlation of a DIL is still limited, and thus selecting an appropriate salt to address a specific challenge can be problematic. In comparison to traditional ILs, DILs physico-chemical properties can be tuned by changing the length and type of spacer which connects the cationic heads as well as the type of cation. This in turn could give rise to symmetrical or asymmetrical DILs. In this work, a systematic study of a homogeneous class of 12 dibromide DILs and 12 di-carboxylate salts has been performed. The latter class of DILs were also compared to mono cation derivatives. The different traditional exchange methods to prepare carboxylate DILs have been evaluated and an insight into the drawbacks encountered is also presented. Prepared DILs were characterized (NMR, TGA, DSC) allowing the influence of the structure on their thermal stability to be understood. Most DILs were obtained as solid salts after careful drying. For some of these compounds, a new possible application was studied, namely their use as hydrogen bond acceptors (HBA) of deep eutectic mixtures, showing again some significant structural related effects.

The cycloisomerization of readily available 2-alkynylbenzoic acids 1 in ionic liquids (ILs) as recyclable reaction media has been studied under the catalytic action of CuCl 2 . With substrates bearing an aryl group on the triple bond, a mixture of ( Z)-3-alkylideneisobenzofuran-1(3 H)-ones (from 5- exo- dig cyclization) and 1 H-isochromen-1-ones (from 6- endo- dig cyclization) was observed in 1-ethyl-3-methylimidazolium ethyl sulfate (EmimEtSO 4 ), while the reaction turned out to be selective toward the formation of the isobenzofuranone only using N-ethyl- N-methylmorpholinium dicyanamide [Mor 1,2 N(CN) 2 ] as the solvent. The 5-membered product was also obtained selectively when the substrate bearing a terminal triple bond was employed, either in EmimEtSO 4 or Mor 1,2 N(CN) 2 . On the other hand, 2-alkynylbenzoic acids bearing an alkyl or an alkenyl group on the triple bond selectively led, in EmimEtSO 4 , to 1 H-isochromen-1-ones, while the formation of a regioisomeric mixture was observed in Mor 1,2 N(CN) 2 . In any case, the solvent/catalyst system could be easily recycled after extraction of the product from the reaction mixture with diethyl ether. DFT calculations have been carried out to clarify the reaction outcome depending on reaction conditions, and the structures of two representative products, which are ( Z)-3-benzylideneisobenzofuran-1(3 H)-one and ( Z)-3-(4-methylphenylmethylidene)isobenzofuran-1(3 H)-one, have been confirmed by X-ray diffraction analysis.

Supported chiral ionic liquids (SILs) were prepared choosing the starting material for the ionic liquid part from the enantiopure stock of the chiral pool (monoterpenoids and an amino acid) and the sporopollenin as an environmentally friendly support. Sporopollenins are microcapsules with naturally well-defined sizes and shapes that can be obtained from pollen grains after removal of the internal cytoplasm and the second shell layer. As thermally stable organic biocompatible structures, sporopollenins have attracted increasing interest in recent years for several applications. Herein, bio-based ILs were anchored onto the surface of sporopollenins obtained from the pollen of Populus deltoides , selected as a model pollen grain. These new structures, which present an external positively charged shell, were characterized by physico-chemical techniques (ATR-FTIR, TGA, SEM, EDX, and solid-state 13 C NMR). A metathesis reaction was also performed on selected bio-based IL modified sporopollenins, demonstrating the possibility to switch the surface properties by exploiting well-known IL chemistry., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)