Search

Background: This systematic review assessed the effectiveness of photodynamic therapy (PDT) in patients with recurrent oral squamous cell carcinoma (OSCC)., Methods: Clinical studies on recurrent OSCC treated with PDT alone were included. Combined treatment strategies were excluded. The search was performed on Medline/Pubmed, Cochrane Library, Embase, Web of Science and ClinicalTrials.gov, manual search, and grey literature., Results: The eleven included studies were observational. The risk of bias and methodological quality were evaluated using the Newcastle-Ottawa Quality Assessment Scale. The studies reported the use of hematoporphyrin derivative, Photofrin Ⓡ , Foscan Ⓡ and 5-aminolevulinic acid. Data on treatment response and survival was collected. Secondarily, postoperative courses and patient's quality of life/acceptance were reported whenever available. Photofrin Ⓡ and Foscan Ⓡ were the most used photosensitisers, with more complete responses. Lesions responding less favourably were on posterior regions or deep-seated in the tissue., Conclusions: Although treatment response differs between treatment protocols, PDT stands as a viable treatment option to be considered, as it can achieve therapeutic results and disease-free, long-lasting periods. Partial treatment responses may be of interest when achieving eligibility for other treatment strategies. Despite this study's limitations, which considered four photosensitisers, Photofrin Ⓡ was the most used but more recent photosensitisers like Foscan Ⓡ have greater chemical stability, tissue penetration, and may be more efficacious on recurrent OSCC., Competing Interests: Declaration of competing interest None, (Copyright © 2024. Published by Elsevier B.V.)

The United Nations estimates that by 2030, agricultural production must increase by 70% to meet food demand. Precision agriculture (PA) optimizes production through efficient resource use, with soil fertility being crucial for nutrient supply. Traditional nutrient quantification methods are costly and time-consuming. This study introduces a rapid (15 min), user-friendly, paper-based platform for determining four essential macronutrients-nitrate, magnesium, calcium, and ammonium-using colorimetric methods and a smartphone for data reading and storage. The sensor effectively detects typical soil nutrient concentrations, showing strong linearity and adequate detection limits. For nitrate, the RGB method resulted in an R 2 of 0.992, a detection range of 0.5 to 10.0 mmol L -1 , and an LOD of 0.299 mmol L -1 . Calcium quantification using grayscale displayed an R 2 of 0.993, a detection range of 2.0 to 6.0 mmol L -1 , and an LOD of 0.595 mmol L -1 . Magnesium was best quantified using the hue color space, with an R 2 of 0.999, a detection range of 1.0 to 6.0 mmol L -1 , and an LOD of 0.144 mmol L -1 . Similarly, ammonium detection using the hue color space had an R 2 of 0.988, a range of 0.5 to 2.5 mmol L -1 , and an LOD of 0.170 mmol L -1 . This device enhances soil fertility assessment accessibility, supporting PA implementation and higher food production., Competing Interests: The authors have no competing interests to declare that are relevant to the content of this article., (This journal is © The Royal Society of Chemistry.)

The applicability of nanomaterials has evolved in biomedical domains thanks to advances in biocompatibility strategies and the mitigation of cytotoxic effects, allowing diagnostics, imaging, and therapeutic approaches. The application of nanoparticles (NP), particularly metal nanoparticles (mNPs), such as gold (Au) and silver (Ag), includes inherent challenges related to the material characteristics, surface modification, and bioconjugation techniques. By tailoring the surface properties through appropriate coating with biocompatible molecules or functionalization with active biomolecules, researchers can reach a harmonious interaction with biological systems or samples (mostly fluids or tissues). Thus, this review highlights the mechanisms associated with the obtention of biocompatible mNP and presents a comprehensive overview of methods that facilitate safe and efficient production. Therefore, we consider this review to be a valuable resource for all researchers navigating this dynamic field.

Bioactive peptides (BAPs) derived from samples of animals and plants have been widely recommended and consumed for their beneficial properties to human health and to control several diseases. This work presents the applications of experimental designs (DoE) used to perform factor screening and/or optimization focused on finding the ideal hydrolysis condition to obtain BAPs with specific biological activities. The collection and discussion of articles revealed that Box Behnken Desing and Central Composite Design were the most used. The main parameters evaluated were pH, time, temperature and enzyme/substrate ratio. Among vegetable protein sources, soy was the most used in the generation of BAPs, and among animal proteins, milk and shrimp stood out as the most explored sources. The degree of hydrolysis and antioxidant activity were the most investigated responses in obtaining BAPs. This review brings new information that helps researchers apply these DoE to obtain high-quality BAPs with the desired biological activities., Competing Interests: Conflict of interestThe authors declare that no personal or financial interests may interfere with the work written in this article. We, CALJ and ECV, as the corresponding authors and on behalf of the staff, certify that there is no conflict of interest., (© The Korean Society of Food Science and Technology 2024. Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.)

(1) Background: The present scoping review aims to scrutinize all existing patient-reported outcomes and assess the perspectives of obstructive sleep apnea patients after maxillomandibular surgery. (2) Methods: The review was carried out according to the extensions for scoping reviews using the PRISMA-ScR guidelines. Several databases were used to carry out the initial search. This study included randomized controlled trials, cohort studies, cross-sectional and case-control studies. The included studies considered patients with obstructive sleep apnea who were submitted to orthognathic surgery as the main subjects, and the patient's perception of quality of life, satisfaction, treatment experience and side effects were assessed. (3) Results: From 1407 examined articles, a total of 16 were included. Most of the included studies used more than one questionnaire to assess quality of life, except for five articles. The most commonly referred instruments were the Epworth Sleepiness Scale, SF-36, the Functional Outcomes of Sleep and Ottawa Sleep Apnea. The most commonly assessed outcomes were sleep quality, daytime function, facial aesthetics, dental function and emotional health. (4) Conclusions: The number of variables that can be evaluated from a patient's perspective are endless, as are the tools available to assess them. Not all of these tools, which are generally questionnaires, assess all the various outcomes, and some do not compare the pre- and post-surgical situations. Most of them are generic and lack specificity for obstructive sleep apnea.

The use of microfluidic paper-based analytical devices (μPADs) for aiding medical diagnosis is a growing trend in the literature mainly due to their low cost, easy use, simple manufacturing, and great potential for application in low-resource settings. Many important biomarkers (proteins, ions, lipids, hormones, DNA, RNA, drugs, whole cells, and more) and biofluids are available for precise detection and diagnosis. We have reviewed the advances μPADs in medical diagnostics have achieved in the last few years, focusing on the most common human biofluids (whole blood/plasma, sweat, urine, tears, and saliva). The challenges of detecting specific biomarkers in each sample are discussed, along with innovative techniques that overcome such limitations. Finally, the difficulties of commercializing μPADs are considered, and future trends are presented, including wearable devices and integrating multiple steps in a single platform., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Objectives: The objective of this umbrella review is to evaluate the efficacy and adverse effects of different teeth whitening techniques in-office (IO) and at-home (AH), regarding chromatic changes and teeth sensitivity., Materials and Methods: The search was carried out from several databases. The included studies were all systematic reviews with or without meta-analysis of RCT or quasi-RCT. The participants were patients that underwent external dental bleaching in permanent vital teeth. The interventions were in-office (IO) bleaching techniques and at-home (AT) bleaching techniques with different bleaching agents and concentrations., Results: The search resulted in a total of 257 articles, and 28 SR were included in the qualitative analysis and nine in the quantitative analysis. There is no difference between in-office and at-home techniques in terms of color change ( p  = 0.95) and post-treatment sensitivity ( p  = 0.85). There is similarity risk and intensity of teeth sensitivity between AH and IO bleaching. IO bleaching with light-activated systems with low concentrations of bleaching agent showed similar results to IO bleaching techniques with high concentrated bleaching gels. With the application of the criteria of the AMSTAR 2 tool, the reviews were considered critically low to high., Conclusions: There are no significant differences in terms of color change between the different bleaching techniques compared. Teeth sensitivity is always present regardless of the technique used. The use of light activation systems did not increase the intensity and risk of post-operative sensitivity., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Authors.)

Objective: To study the impact of the use of progesterone on embryo morphokinetics and on the outcomes of intracytoplasmic sperm injection cycles., Design: Cohort study., Setting: Private university-affiliated in vitro fertilization center., Patient(s): This study included 236 freeze-all intracytoplasmic sperm injection cycles and the resultant 2,768 injected oocytes cultured in a time-lapse imaging incubation system. Patients were matched by age and divided into groups depending on the protocol used to prevent the luteinizing hormone surge: progestin-primed (144 cycles and 1,360 embryos) and gonadotropin hormone-releasing hormone (GnRH) antagonist (144 cycles and 1,408 embryos) groups., Intervention(s): The kinetic recorded markers were time to pronuclear appearance and fading, time to 2-8 cells, time to morulation, time to start of blastulation, and time to blastulation. The durations of cell cycles and time to complete synchronous divisions were calculated. The Known Implantation Data Score ranking was recorded. Morphokinetics and clinical outcomes were compared between the groups., Main Outcome Measure(s): Embryo morphokinetics and clinical outcomes., Results: Slower time to pronuclear appearance, time to 2 cells, time to 7 cells, time to start of blastulation, and time to blastulation were observed in embryos derived from progestin-primed cycles than in those from the GnRH antagonist group. No significant differences were noted in any other morphokinetic milestone. Significantly higher cancellation and implantation rates were observed in the progestin-primed group. However, no significant differences were noted in the pregnancy and miscarriage rates. The expenses for treatment using premature GnRH antagonist and progestins were US$318.18 and US$11.05, respectively., Conclusions: Exogenous progesterone replaces the GnRH antagonist for the prevention of premature luteinizing hormone surge, in freeze-all cycles, with the advantage of oral administration and potential cost reduction., Competing Interests: Declaration of interests D.P.d.A.F.B. has nothing to disclose. A.S. has nothing to disclose. E.C. has nothing to disclose. P.G. has nothing to disclose. A.I.J. has nothing to disclose. E.B. has nothing to disclose., (Copyright © 2023. Published by Elsevier Inc.)

Reversine is a purine derivative that has been investigated with regard to its biological effects, such as its anticancer properties and, mostly, its ability to induce the dedifferentiation of adult cells, increasing their plasticity. The obtained dedifferentiated cells have a high potential for use in regenerative procedures, such as regenerative dentistry (RD). Instead of replacing the lost or damaged oral tissues with synthetic materials, RD uses stem cells combined with matrices and an appropriate microenvironment to achieve tissue regeneration. However, the currently available stem cell sources present limitations, thus restricting the potential of RD. Based on this problem, new sources of stem cells are fundamental. This work aims to characterize mouse gingival fibroblasts (GFs) after dedifferentiation with reversine. Different administration protocols were tested, and the cells obtained were evaluated regarding their cell metabolism, protein and DNA contents, cell cycle changes, morphology, cell death, genotoxicity, and acquisition of stem cell characteristics. Additionally, their teratoma potential was evaluated after in vivo transplantation. Reversine caused toxicity at higher concentrations, with decreased cell metabolic activity and protein content. The cells obtained displayed polyploidy, a cycle arrest in the G2/M phase, and showed an enlarged size. Additionally, apoptosis and genotoxicity were found at higher reversine concentrations. A subpopulation of the GFs possessed stem properties, as supported by the increased expression of CD90, CD105, and TERT, the existence of a CD106+ population, and their trilineage differentiation capacity. The dedifferentiated cells did not induce teratoma formation. The extensive characterization performed shows that significant functional, morphological, and genetic changes occur during the dedifferentiation process. The dedifferentiated cells have some stem-like characteristics, which are of interest for RD.

The aim was to evaluate the effects of adding different functional monomers to experimental self-adhesive composites (SACs) on polymerization kinetics, cell metabolic activity, and sealing ability. SACs were formulated using urethane dimethacrylate as the base monomer and triethylene glycol dimethacrylate. Additionally, 10 wt.% of distinct functional monomers were added - 10-methacryloyloxydecyl dihydrogen phosphate, glycerol phosphate dimethacrylate (GPDM), 2-hydroxyethyl methacrylate (HEMA) or hydroxyethyl acrylamide (HEAA). ATR-FTIR was used to determine real-time polymerization kinetics (20 min, n = 3). The final extrapolated conversion and polymerization rates were determined ( D C ,max; R p ,max ). The D C ,max values were employed to calculate volumetric shrinkage. The MTT assay was performed on MDPC-23 cells using disc extracts at different concentrations ( n = 8). Class V cavities were prepared in 60 sound human molars, assigned to six groups ( n = 10), depending on the composite used and aging type (T0 or TC, if thermocycled for 10 000 cycles). One-way ANOVA, two-way, and Kruskal - Wallis tests were employed to treat the data ( ɑ = 0.05). Varying the functional monomers had a large impact on D C,max , as confirmed by one-way ANOVA ( p <0.001). The highest was obtained for HEMA (64 ± 3%). The HEMA and HEAA formulations were found to be significantly more toxic at concentrations below 100%. For microleakage, having a functional monomer or not did not show any improvement, irrespective of margin or aging period (Mann-Whitney U, p > 0.05). Larger functional monomers MDP and GPDM affected polymerization properties. Conversely, their acidity did not seem to be detrimental to cell metabolic activity. Regarding sealing ability, it seems that the functional monomers did not bring an advantage to the composites. Varying the functional monomer in SACs had a clear impact on the polymerization kinetics as well as on their cytotoxic potential. However, it did not confer better microleakage and sealing. Claiming self-adhesiveness based only on functional monomers seems dubious., (Creative Commons Attribution license.)

Background: Microorganisms and their by-products are responsible for establishing pulpal and periapical diseases. Healing is compromised in patients under bisphosphonate therapy, and the presence of periapical infections can potentially lead to the development of medication-related osteonecrosis of the jaw (MRONJ). This work aimed to evaluate if bisphosphonate therapy is a risk factor for MRONJ development in the presence of periapical lesions., Methods: Two groups of 10 female Wistar rats were used. The experimental group received zoledronate (0.1 mg/kg) intraperitoneally, and the control received a saline solution, three times a week for three weeks. One week after the last injection, apical periodontitis was induced through pulpal exposure in the mandibular first molars. Twenty-one days later, the animals were intravenously injected with 99m Tc-HMDP, and the radioactivity uptake by mandibular specimens was counted. In addition, sample radiographs and a histological examination were performed., Results: The bone loss was higher in the control group when compared to the experimental group ( p = 0.027). 99m Tc-HMDP uptake in the control was reduced compared with the experimental group, although without statistical significance., Conclusions: In the presence of zoledronate therapy, apical periodontitis does not increase the risk of MRONJ development, and periapical lesions have lower bone resorption when compared to the control group.

Electrochemical techniques are commonly applied to micro total analysis system (μTAS) devices mainly due to its high sensitivity and miniaturization capacity. Among many electrochemical techniques, capacitively coupled contactless conductivity detection (C 4 D) stands out for not requiring direct electrode-solution contact, avoiding several problems such as electrolysis, bubble formation, and metal degradation. Furthermore, the instrumentation required for C 4 D measurements is compact, low cost, and easy to use, allowing in situ measurements to be performed even by nonspecialized personal. Contrarily, the production of metallic electrodes and microchannels adequate for C 4 D measurements commonly requires specialized facilities and workers, increasing the costs of applying these methods. We propose alternatives to batch manufacture metallic electrodes and polymeric microchannels for C 4 D analysis using more straightforward equipment and lower-cost materials. Three devices with different dielectric layer compositions and electrode sizes were tested and compared regarding their analytical performance. The constructed platforms have shown a reduction of more than 64% in cost when compared to traditional techniques and displayed good linearity (R 2 ≥ 0.994), reproducibility (RSD ≤ 4.07%, n = 3), and limits of detection (≤0.26 mmol/L) when measuring standard NaCl samples. Therefore, the proposed methods were successfully validated and are available for further C 4 D applications such as diagnosis of dry-eye syndrome., (© 2021 Wiley-VCH GmbH.)

This paper reports the development of a low-cost (< US$ 0.03 per device) immunosensor based on gold-modified screen-printed carbon electrodes (SPCEs). As a proof of concept, the immunosensor was tested for a fast and sensitive determination of S proteins from both SARS-CoV and SARS-CoV-2, by a single disposable device. Gold nanoparticles were electrochemically deposited via direct reduction of gold ions on the electrode using amperometry. Capture antibodies from spike (S) protein were covalently immobilized on carboxylic groups of self-assembled monolayers (SAM) of mercaptoacetic acid (MAA) attached to the gold nanoparticles. Label-free detection of S proteins from both SARS-CoV and SARS-CoV-2 was performed with electrochemical impedance spectroscopy (EIS). The immunosensor fabricated with 9 s gold deposition had a high performance in terms of selectivity, sensitivity, and low limit of detection (LOD) (3.16 pmol L -1 ), thus permitting the direct determination of the target proteins in spiked saliva samples. The complete analysis can be carried out within 35 min using a simple one-step assay protocol with small sample volumes (10 µL). With such features, the immunoplatform presented here can be deployed for mass testing in point-of-care settings., (© 2022. Springer-Verlag GmbH Germany, part of Springer Nature.)

Currently, composite resins have become the material of choice for the restoration of posterior teeth. Although bulk-fill resins represent a tempting alternative due to their lower complexity and faster use, some dentists are reluctant to use this material. The objective is to compare the performance of bulk-fill resins and conventional resins in direct restorations of posterior teeth based on the literature. The databases that were used to carry out the research were PubMed/MEDLINE, Embase, the Cochrane Library and the WOS. This umbrella literature review complies with PRISMA standards and assesses the quality of studies using the AMSTAR 2 tool. With the application of the criteria of the AMSTAR 2 tool, the reviews were considered low to moderate. The overall meta-analysis, although without statistical significance, favours mostly the use of conventional resin, as it is about five times more likely to obtain a favourable result than bulk-fill resin. Bulk-fill resins result in a simplification of the clinical process of posterior direct restorations, which is an advantage. The performance in terms of several properties of bulk-fill resins and conventional resins showed that they present similar behaviour.

(1) Background: Coronal microleakage can lead to endodontic treatment failure. This study aimed to compare the sealing ability of different temporary restorative materials used during endodontic treatment. (2) Methods: Eighty sheep incisors were collected, uniformized in length, and access cavities were performed, except for in the negative control group, where the teeth were left intact. The teeth were divided into six different groups. In the positive control group, the access cavity was made and left empty. In the experimental groups, access cavities were restored with three different temporary materials (IRM ® , Ketac™ Silver, and Cavit™) and with a definitive restorative material (Filtek Supreme™). The teeth were submitted to thermocycling, and two and four weeks later, they were infiltrated with 99m TcNaO 4 , and nuclear medicine imaging was performed. (3) Results: Filtek Supreme™ obtained the lowest infiltration values. Regarding the temporary materials, at two weeks, Ketac™ Silver presented the lowest infiltration, followed by IRM ® , whereas Cavit™ presented the highest infiltration. At four weeks, Ketac™ Silver remained with the lowest values, whereas Cavit™ decreased the infiltration, comparable to IRM ® . (4) Conclusion: Regarding temporary materials, Ketac™ Silver had the lowest infiltration at 2 and 4 weeks, whereas the highest infiltration was found in the Cavit™ group at two weeks and in the IRM ® group at 4 weeks.

Globalization has raised concerns about spreading diseases and emphasized the need for quick and efficient methods for drug screening. Established drug efficacy and toxicity approaches have proven obsolete, with a high failure rate in clinical trials. Organ-on-a-chip has emerged as an essential alternative to outdated techniques, precisely simulating important characteristics of organs and predicting drug pharmacokinetics more ethically and efficiently. Although promising, most organ-on-a-chip devices are still manufactured using principles and materials from the micromachining industry. The abusive use of plastic for traditional drug screening methods and device production should be considered when substituting technologies so that the compensation for the generation of plastic waste can be projected. This critical review outlines recent advances for organ-on-a-chip in the industry and estimates the possibility of scaling up its production. Moreover, it analyzes trends in organ-on-a-chip publications and provides suggestions for a more sustainable future for organ-on-a-chip research and production.

Although the exact mechanism of the pathogenesis of coronavirus SARS-CoV-2 (COVID-19) is not fully understood, oxidative stress and the release of pro-inflammatory cytokines have been highlighted as playing a vital role in the pathogenesis of the disease. In this sense, alternative treatments are needed to reduce the level of inflammation caused by COVID-19. Therefore, this study aimed to investigate the potential effect of red photobiomodulation (PBM) as an attractive therapy to downregulate the cytokine storm caused by COVID-19 in a zebrafish model. RT-qPCR analyses and protein-protein interaction prediction among SARS-CoV-2 and Danio rerio proteins showed that recombinant Spike protein (rSpike) was responsible for generating systemic inflammatory processes with significantly increased levels of pro-inflammatory ( il1b , il6 , tnfa , and nfkbiab ), oxidative stress ( romo1 ) and energy metabolism ( slc2a1a and coa1 ) mRNA markers, with a pattern similar to those observed in COVID-19 cases in humans. On the other hand, PBM treatment was able to decrease the mRNA levels of these pro-inflammatory and oxidative stress markers compared with rSpike in various tissues, promoting an anti-inflammatory response. Conversely, PBM promotes cellular and tissue repair of injured tissues and significantly increases the survival rate of rSpike-inoculated individuals. Additionally, metabolomics analysis showed that the most-impacted metabolic pathways between PBM and the rSpike treated groups were related to steroid metabolism, immune system, and lipid metabolism. Together, our findings suggest that the inflammatory process is an incisive feature of COVID-19 and red PBM can be used as a novel therapeutic agent for COVID-19 by regulating the inflammatory response. Nevertheless, the need for more clinical trials remains, and there is a significant gap to overcome before clinical trials can commence.

Photodynamic therapy using Hypericin (Hy-PDT) is an alternative non-invasive treatment that enables selective tumor inhibition and angiogenesis derived from the differential recruitment of endothelial cells in the tumor microenvironment. Most PDT studies were performed on in vitro models without vascular biomechanical simulation. Our work strives to develop a microchip that generates a constant shear stress force to investigate the Hy-PDT efficiency on human umbilical vein endothelial cells (HUVECs). The microchip with a single straight microchannel was composed of the bottom layer (polystyrene), the middle layer (double-sided biocompatible adhesive tape), and the top layer (polyester film) and could produce shear stress in the range of 1.4 - 7.0 dyn cm -2 . The quantification of vascular endothelial growth factor (VEGF), cell viability, and activities of caspases 3 and 7 were assayed to validate the microchip and Hy-PDT efficacy. After the endothelization, static and dynamic cell incubations with Hy were conducted in microchips. Compared to static systems, the shear stress displayed its effect on the increasing release of VEGF and promoted more cell damage and cell death via necrosis during Hy-PDT. In conclusion, the expressive shear stress-dependent manner during PDT treatments suggests that the microchip could be an essential approach in preclinical tests to evaluate the therapeutic outcome considering the endothelial shear stress microenvironment., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Craniofacial bone defects are one of the biggest clinical challenges in regenerative medicine, with secondary autologous bone grafting being the gold-standard technique. The development of new three-dimensional matrices intends to overcome the disadvantages of the gold-standard method. The aim of this paper is to put forth an in-depth review regarding the clinical efficiency of available 3D printed biomaterials for the correction of alveolar bone defects. A survey was carried out using the following databases: PubMed via Medline, Cochrane Library, Scopus, Web of Science, EMBASE, and gray literature. The inclusion criteria applied were the following: in vitro , in vivo , ex vivo , and clinical studies; and studies that assessed bone regeneration resorting to 3D printed biomaterials. The risk of bias of the in vitro and in vivo studies was performed using the guidelines for the reporting of pre-clinical studies on dental materials by Faggion Jr and the SYRCLE risk of bias tool, respectively. In total, 92 publications were included in the final sample. The most reported three-dimensional biomaterials were the PCL matrix, β-TCP matrix, and hydroxyapatite matrix. These biomaterials can be combined with different polymers and bioactive molecules such as rBMP-2. Most of the included studies had a high risk of bias. Despite the advances in the research on new three-dimensionally printed biomaterials in bone regeneration, the existing results are not sufficient to justify the application of these biomaterials in routine clinical practice.

Electrochemical biosensing devices are known for their simple operational procedures, low fabrication cost, and suitable real-time detection. Despite these advantages, they have shown some limitations in the immobilization of biochemicals. The development of alternative materials to overcome these drawbacks has attracted significant attention. Nanocellulose-based materials have revealed valuable features due to their capacity for the immobilization of biomolecules, structural flexibility, and biocompatibility. Bacterial nanocellulose (BNC) has gained a promising role as an alternative to antifouling surfaces. To widen its applicability as a biosensing device, BNC may form part of the supports for the immobilization of specific materials. The possibilities of modification methods and in situ and ex situ functionalization enable new BNC properties. With the new insights into nanoscale studies, we expect that many biosensors currently based on plastic, glass, or paper platforms will rely on renewable platforms, especially BNC ones. Moreover, substrates based on BNC seem to have paved the way for the development of sensing platforms with minimally invasive approaches, such as wearable devices, due to their mechanical flexibility and biocompatibility.

Aim: To investigate the association between root canal treatment outcome, diabetes mellitus, and alterations of the angiogenic process., Methodology: A retrospective observational study was conducted in healthy (control group, CG) and diabetic (type II diabetes mellitus group, DG) patients after root canal treatment. The follow-up appointments were performed to clinically and radiographically observe symptoms, the healing of periapical lesions and the quality of root fillings. In the animal model study, diabetic Goto-Kakizaki (GK) rats and control Wistar rats were used. After 21 days of pulp exposure and the development of apical periodontitis (AP), the mandibles were removed for scintigraphic, radiographic, histopathological and molecular analyses. Chi-square tests were performed to examine the variables related to endodontic outcome and differences between animal groups were assessed using the Student's t-test., Results: The group of patients with diabetes had a significantly lower rate of success following root canal treatment than the CG (p < .001). Logistic regression suggested that diabetes is a risk factor for success of root canal treatment. In the animal study, GK rats had significantly higher fasting glycaemia at t0 and t21 (p < .001) and triglycerides levels (p < .05) and area under the curve (AUC) during the insulin tolerance test at t21 (p < .001). AP area was significantly greater in GK rats (p < .05). Histologically, diabetic rats had increased signs of periodontal ligament inflammation 21 days after the induction of apical periodontitis, with fibro-hyaline matrix filling and vessel with undefined walls. Wistar rats had significantly increased vascular endothelial growth factor (VEGF) levels and VEGF/Ang-2 ratio 21 days after AP induction (p < .08; p < .07). GK rats had intrinsically lower levels of VEGF than control rats (p < .05), which did not change after AP., Conclusion: Diabetes mellitus should be considered as an important factor in the prognosis of root canal treatment and its outcomes over time. Future strategies to improve angiogenesis and tissue repair should be pursued to achieve better root canal treatment outcomes in diabetic patients., (© 2021 International Endodontic Journal. Published by John Wiley & Sons Ltd.)

Low-cost, instrument-free colorimetric tests were developed to detect SARS-CoV-2 using plasmonic biosensors with Au nanoparticles functionalized with polyclonal antibodies (f-AuNPs). Intense color changes were noted with the naked eye owing to plasmon coupling when f-AuNPs form clusters on the virus, with high sensitivity and a detection limit of 0.28 PFU mL -1 (PFU stands for plaque-forming units) in human saliva. Plasmon coupling was corroborated with computer simulations using the finite-difference time-domain (FDTD) method. The strategies based on preparing plasmonic biosensors with f-AuNPs are robust to permit SARS-CoV-2 detection via dynamic light scattering and UV-vis spectroscopy without interference from other viruses, such as influenza and dengue viruses. The diagnosis was made with a smartphone app after processing the images collected from the smartphone camera, measuring the concentration of SARS-CoV-2. Both image processing and machine learning algorithms were found to provide COVID-19 diagnosis with 100% accuracy for saliva samples. In subsidiary experiments, we observed that the biosensor could be used to detect the virus in river waters without pretreatment. With fast responses and requiring small sample amounts (only 20 μL), these colorimetric tests can be deployed in any location within the point-of-care diagnosis paradigm for epidemiological control.

After the elimination of dental caries lesions, some microorganisms may remain viable in the tooth structure. Thus, cavity disinfection is an important procedure. The aim of this study was to evaluate the effect of cavity disinfectants on the adhesion to dentin of permanent teeth. Sixty molars were ground flat and randomly assigned to six groups: control; chlorhexidine; Aloe vera; glutaraldehyde; EDTA; ethanol. Cavity disinfectants were applied, rinsed, and air-dried. The restorations were performed with the aid of polyethylene tubes. Shear bond strength, work to detachment, and shear modulus were evaluated. All data were statistically analyzed and the level of significance was set at 5%. The control group showed the lowest shear bond strength (8.34 ± 2.68 MPa). Aloe vera showed the lowest work to debonding (2284 J/m 2 ) while chlorhexidine showed the highest (9347 J/m 2 ). Regarding the shear modulus, ethanol, chlorhexidine, and EDTA presented similar values to the control group (216.11 kPa), and glutaraldehyde and Aloe vera presented values twice as high. The use of chlorhexidine, ethanol, EDTA, glutaraldehyde, and Aloe vera did not impair the adhesion established between the dentin of permanent teeth and composite resin. Even though there is a need for clinical studies to support these findings, all disinfectants seem to be good choices as pretreatment agents.

Background: Obturation represents a critical step in endodontic treatment, which relies on a core material and a sealer. This study aims to evaluate the sealing ability and bond strength to the root canal walls of an epoxy resin-based sealer (AH-Plus ® , Dentsply Sirona, Johnson City, TN, USA) and a bioceramic sealer (GuttaFlow Bioseal ® , Coltène/Whaledent, GmbH + Co. KG, Langenau, Germany)., Methods: Thirty-eight maxillary anterior teeth with single roots and identical round sections were separated into two experimental groups according to the root canal sealers used, namely, G1 = AH-Plus ® and G2 = GuttaFlow Bioseal ® , and two control groups, specifically, G3 = the negative control and G4 = the positive control. The sealing capacity was measured by the penetration of the radioactive isotope 99 mTc. For the push-out test, the compressive force test was performed in a universal machine and the force was applied by exerting pressure on the surface of the material to be tested in the apical to the coronal direction and using three test points with different diameters., Results: GuttaFlow Bioseal ® exhibited superior sealing ability compared to AH-Plus ® ( p = 0.003). Regarding the bond strength, AH-Plus ® provided higher adhesion values than GuttaFlow Bioseal ® in the three sections of the tooth root ( p = 0.001)., Conclusions: GuttaFlow Bioseal ® had significantly better sealing ability than AH-Plus ® but lower adhesion values in the three zones of the root canal, with statistically significant differences between the groups. However, it is important to note that for the action of endodontic sealers to be maximized, the root-filling technique must be most appropriate.

Oronasal fistula can persist after conventional secondary alveolar bone graft surgery, which may lead to functional issues, such as regurgitation of fluids from the oral to the nasal cavity. This manuscript describes a clinical case of a patient with a bilateral cleft lip and palate that underwent tongue graft surgery for closure of an oronasal fistula after three failed local mucosa flap surgeries. The multidisciplinary treatment was comprised of orthodontic treatment, mucosa and alveolar grafts for palate closure and aesthetic rehabilitation of the anterior maxillary teeth. Smile aesthetics were noticeably improved, enhancing the patient's self-perception and confidence.

The latest Eurocleft study reported several discrepancies in cleft care. Since then, no critical assessment has been performed. This study aimed to better understand the main strengths and inefficiencies of cleft care within Europe. The Google documents platform was used to create an online survey to investigate several aspects, i.e., provider characteristics, patient profile, services offered, and treatment protocols and complications. Descriptive statistics were calculated. The association between categorical variables was performed using Fisher's exact test. The significance level chosen was 0.05. A total of 69 individuals from 23 European countries completed the survey. Centralized care was the preferred system, and the majority of the countries have an association for cleft patients and professionals (53.6%). The largest percentage of patients was seen in the university hospital environment (Fisher's exact test p < 0.001). The majority of responders (98.6%) reported that an orthodontist was involved in cleft treatment, and 56.5% of them spend 76-100% of their time treating these patients. Despite cleft care having been reconfigured in Europe, a better consensus among the various centers regarding provider characteristics, services offered, and treatment protocols is still required. There is a need for better coordination between clinicians and national/international regulatory bodies.

Velopharyngeal insufficiency may occur as a result of an anatomical or structural defect and may be present in patients with cleft lip and palate. The treatment options presented in the literature are varied, covering invasive and non-invasive methods. However, although these approaches have been employed and their outcomes reviewed, no conclusions have been made about which approach is the gold-standard. This umbrella review aimed to synthesize the current literature regarding velopharyngeal insufficiency treatments in cleft lip and palate patients, evaluating their effectiveness based on systematic reviews. A standardized search was carried out in several electronic databases, namely PubMed via Medline, Web of Science, Cochrane Library, and Embase. The quality of the included studies was evaluated using AMSTAR2 and degree of overlap was analyzed using Corrected Covered Area. Thirteen articles were included in the qualitative review, with only 1 in the non-invasive method category, and 12 in the invasive method category. All reviewed articles were judged to be of low quality. In symptomatic patients, treatment did not solely comprise speech therapy, as surgical intervention was often necessary. Although there was no surgical technique considered to be the gold standard for the correction of velopharyngeal insufficiency, the Furlow Z-plasty technique and minimal incision palatopharyngoplasty were the best among reported techniques.

A low-cost and disposable graphene polylactic (G-PLA) 3D-printed electrode modified with gold particles (AuPs) was explored to detect the cDNA of SARS-CoV-2 and creatinine, a potential biomarker for COVID-19. For that, a simple, non-enzymatic electrochemical sensor, based on a Au-modified G-PLA platform was applied. The AuPs deposited on the electrode were involved in a complexation reaction with creatinine, resulting in a decrease in the analytical response, and thus providing a fast and simple electroanalytical device. Physicochemical characterizations were performed by SEM, EIS, FTIR, and cyclic voltammetry. Square wave voltammetry was employed for the creatinine detection, and the sensor presented a linear response with a detection limit of 0.016 mmol L -1 . Finally, a biosensor for the detection of SARS-CoV-2 was developed based on the immobilization of a capture sequence of the viral cDNA upon the Au-modified 3D-printed electrode. The concentration, immobilization time, and hybridization time were evaluated in presence of the DNA target, resulting in a biosensor with rapid and low-cost analysis, capable of sensing the cDNA of the virus with a good limit of detection (0.30 µmol L -1 ), and high sensitivity (0.583 µA µmol -1 L). Reproducible results were obtained (RSD = 1.14%, n = 3), attesting to the potentiality of 3D-printed platforms for the production of biosensors., Competing Interests: The authors declare no conflict of interest. The funders had no role in the design of the study; in the collection, analyses, or interpretation of data; in the writing of the manuscript or in the decision to publish the results.

The coronavirus disease 2019 (Covid-19), which caused respiratory problems in many patients worldwide, led to more than 5 million deaths by the end of 2021. Experienced symptoms vary from mild to severe illness. Understanding the infection severity to reach a better prognosis could be useful to the clinics, and one study area to fulfill one piece of this biological puzzle is metabolomics. The metabolite profile and/or levels being monitored can help predict phenotype properties. Therefore, this study evaluated plasma metabolomes of 110 individual samples, 57 from control patients and 53 from recent positive cases of Covid-19 (IgM 98% reagent), representing mild to severe symptoms, before any clinical intervention. Polar metabolites from plasma samples were analyzed by quantitative 1 H NMR. Glycerol, 3-aminoisobutyrate, formate, and glucuronate levels showed alterations in Covid-19 patients compared to those in the control group (Tukey's HSD p -value cutoff = 0.05), affecting the lactate, phenylalanine, tyrosine, and tryptophan biosynthesis and d-glutamine, d-glutamate, and glycerolipid metabolisms. These metabolic alterations show that SARS-CoV-2 infection led to disturbance in the energetic system, supporting the viral replication and corroborating with the severe clinical conditions of patients. Six polar metabolites (glycerol, acetate, 3-aminoisobutyrate, formate, glucuronate, and lactate) were revealed by PLS-DA and predicted by ROC curves and ANOVA to be potential prognostic metabolite panels for Covid-19 and considered clinically relevant for predicting infection severity due to their straight roles in the lipid and energy metabolism. Thus, metabolomics from samples of Covid-19 patients is a powerful tool for a better understanding of the disease mechanism of action and metabolic consequences of the infection in the human body and may corroborate allowing clinicians to intervene quickly according to the needs of Covid-19 patients.

The Caries Management by Risk Assessment (CAMBRA) protocol consists of analyzing the patient's profile by assessing the risk and protective factors and assigning a risk level to the patient to allow an individualized treatment plan, which combines restorative treatments with a preventive chemical therapy. This systematic review and critical appraisal aim to evaluate the effectiveness of the CAMBRA protocol in reducing the incidence of caries lesions and oral bacterial load. An electronic search was carried out in the Cochrane Library, PubMed, Web of Science, Scopus, and Embase databases. Clinical studies evaluating the incidence of dental caries lesions and/or the reduction of cariogenic bacterial load ( Streptococcus mutans and/or Lactobacilli spp.), with at least an intervention group that follows the CAMBRA protocol and a control group published up until January 2022, were included. The methodological quality assessment of the included clinical studies was assessed through the Revised Cochrane risk-of-bias tool for randomized trials (RoB 2). The quality of the case-control study was evaluated according to the Methodological Index for Non-Randomized Studies (ROBINS-I). There is currently no scientific evidence to recommend the integration of the CAMBRA protocol into clinical practice. The results reported by the studies included in the systematic review do not suggest a decrease in the incidence of dental caries lesions and/or bacterial load. There is a clear need for the development of new clinical studies with an adequate methodology and follow-up, both for the CAMBRA protocol and for its components individually.

Objective: This review aims to systematically examine the effectiveness of photodynamic therapy for the treatment of patients with recurrent oral squamous cell carcinoma., Introduction: Oral squamous cell carcinoma is a significant public health problem, and is the seventh most common cancer. Its incidence is mainly due to tobacco use, alcohol consumption, and HPV infection. The survival rates are poor due to diagnosis at advanced stages, with high recurrence rates. Although current evidence does not point to photodynamic therapy as a first-line option, this treatment might be suitable for treating recurrent stages of the cancer where conventional treatments were ineffective. Despite the potential of photodynamic therapy, there is a need to verify the scientific evidence to support its indication for the treatment of recurrent oral squamous cell carcinoma., Inclusion Criteria: This review will consider studies on any stage of recurrent oral squamous cell carcinoma treated with photodynamic therapy after receiving first-line conventional treatments. Patients of any age, gender, and geographic location will be included. The primary outcomes will be to evaluate response to treatment, focusing on remission, recurrence, change in size of the lesion, alleviation of symptoms, and survival. Secondary outcomes will be postoperative complications, presence of necrosis, patient quality of life after treatment, and patient satisfaction., Methods: Studies will be searched using a combination of index terms and keywords in MEDLINE, Cochrane Central, Web of Science, Embase, and ClinicalTrials.gov. No date limits will be applied. Articles written in English, French, Spanish, or Portuguese will be considered. Findings will be provided as a narrative synthesis, structured around the photodynamic therapy protocol used. A meta-analysis is planned and subgroup analysis will be conducted if possible. The certainty of findings will be assessed., Systematic Review Registration Number: PROSPERO CRD42020141075., Competing Interests: The authors declare no conflict of interest., (Copyright © 2021 JBI.)

Direct pulp capping consists of a procedure in which a material is directly placed over the exposed pulp to maintain dental vitality. Although still widely used in clinical practice, previous in vitro studies found that the biomaterial Life ® presented high cytotoxicity, leading to cell death. This study aimed to identify the Life ® constituents responsible for its cytotoxic effects on odontoblast-like cells (MDPC-23). Aqueous medium conditioned with Life ® was subjected to liquid-liquid extraction with ethyl acetate. After solvent removal, cells were treated with residues isolated from the organic and aqueous fractions. MTT and Trypan blue assays were carried out to evaluate the metabolic activity and cell death. The organic phase residue promoted a significant decrease in metabolic activity and increased cell death. On the contrary, no cytotoxic effects were observed with the mixture from the aqueous fraction. Spectroscopic and spectrometric methods allowed the identification of the toxic compounds. A mixture of the regioisomers ortho , para, and meta of N -ethyl-toluenesulfonamide was identified as the agent responsible for the toxicity of biomaterial Life ® in MDPC-23 cells. These findings contribute to improving biomaterial research and development.

Three-dimensional (3D) resin medical-dental devices have been increasingly used in recent years after the emergence of digital technologies. In Orthodontics, therapies with aligners have gained popularity, mainly due to the aggressive promotion policies developed by the industry. However, their systemic effects are largely unknown, with few studies evaluating the systemic toxicity of these materials. The release of bisphenol A and other residual monomers have cytotoxic, genotoxic, and estrogenic effects. This systematic review aims to analyze the release of toxic substances from 3D resins used in Orthodontics and their toxic systemic effects systematically. The PICO question asked was, "Does the use of 3D resins in orthodontic devices induce cytotoxic effects or changes in estrogen levels?". The search was carried out in several databases and according to PRISMA guidelines. In vitro, in vivo, and clinical studies were included. The in vitro studies' risk of bias was assessed using the guidelines for the reporting of pre-clinical studies on dental materials by Faggion Jr. For the in vivo studies, the SYRCLE risk of bias tool was used, and for the clinical studies, the Cochrane tool. A total of 400 articles retrieved from the databases were initially scrutinized. Fourteen articles were included for qualitative analysis. The risk of bias was considered medium to high. Cytotoxic effects or estrogen levels cannot be confirmed based on the limited preliminary evidence given by in vitro studies. Evidence of the release of bisphenol A and other monomers from 3D resin devices, either in vitro or clinical studies, remains ambiguous. The few robust results in the current literature demonstrate the absolute need for further studies, especially given the possible implications for the young patient's fertility, which constitutes one of the largest groups of patients using these orthodontic devices.

Background : There has been an increase in demand for orthodontic treatment within the adult population, who likely receive restorative treatments using ceramic structures. The current state of the art regarding the most effective method to achieve an appropriate bond strength of brackets on ceramic surfaces isn't consensual. This systematic review aims to compare the available surface treatments to ceramics and determine the one that allows to obtain the best bond strength. Methods : This systematic review followed the PRISMA guidelines and the PICO methodology was used, with the question "What is the most effective technique for bonding brackets on ceramic crowns or veneers?". The research was carried out in PubMed, Web of Science, Embase and Cochrane Library databases. In vitro and ex vivo studies were included. The methodological quality was evaluated using the guidelines for reporting of preclinical studies on dental materials by Faggion Jr. Results : A total of 655 articles searched in various databases were initially scrutinized. Sevety one articles were chosen for quality analysis. The risk of bias was considered medium to high in most studies. The use of hydrofluoric acid (HF), silane and laser afforded the overall best results. HF and HF plus laser achieved significantly highest bond strength scores in felsdphatic porcelain, while laser was the best treatment in lithium disilicate ceramics. Conclusions : The most effective technique for bonding brackets on ceramic is dependent on the type of ceramic.