Back to Search
Start Over
Forced response numerical investigation of a transonic compressor rotor
- Publication Year :
- 2023
-
Abstract
- The present thesis discusses the forced response of a rotor’s bladed-disk when excited by the periodic force produced by a wake generator, or Inlet Guide Vane (IGV),with 8 equally-spaced blades. These components are part of an axial transonic compressor rig, moreover the Transonic Compressor Darmstadt 1 (TCD1), located at the Technical University of Darmstadt. The investigation is within the ARIAS (Advanced Research Into Aeromechanical Solutions) project, that aims to improve the predictive capabilities of the design methods used in the aircraft propulsion engine’s industry to study aerodynamically induced blade vibrations. The methodology comprised a set of numerical analyses that were conducted using the software Ansys, addressing both the structural and the aerodynamics sides of the aeroelastic problem, in a co-dependent way. At first, steady-state CFD simulations were conducted to study the mesh convergence and to analyse the operation of the compressor at N80 speed, obtaining its compressor map and its peak efficiency operation point. From these, the aerodynamic static force being applied on theblade was obtained, allowing to determine the pre-stresses of the bladed-disk, orblisk. With a modal analysis, the natural modes of the rotor blisk at N80 speed were obtained and the resonance crossing M2 EO8 was identified, plotting the Campbell and ZZENF diagrams. From the modal displacements of the critical mode, a blade flutter analysis was conducted in order to compute the aerodynamic damping ratio of the rotor blisk. With a transient CFD analysis, the periodic forcing being applied onthe rotor blisk that arises from the IGV wake pattern was determined and exported as Fourier coefficients. Finally, a harmonic simulation was carried out to analyse the forced response of the blisk, introducing both the aerodynamic damping value and the unsteady forcing mapped onto the blade. As a result, the frequency response of both the blade maximum alternating deflections and equi
Details
- Database :
- OAIster
- Notes :
- application/pdf, English
- Publication Type :
- Electronic Resource
- Accession number :
- edsoai.on1387572682
- Document Type :
- Electronic Resource