Fracture toughness in the transition temperature region

The steels fracture toughness was measured at two different temperature T= - 60°C and T = -90°C, at v=0.02 mm/min and v=0.5 mm/min. The following steels: CrMoV, 20MnMoNi55, A533B and A508 were tested with three different sizes of CT specimens 50 and 100 and 200. Those steels are weldable, although the authors investigated the fracture behaviour of base material. In order to satisfy statistical analyses, a large number of specimens were tested. Fracture behaviour has turned out to be typical, S-shaped curve for transitional fracture at low temperatures. Apart from the other variables, specimen’s width significantly affects measured toughness. Smaller specimens, CT50, might be considered of upper bound reliability while the CT200 specimens were shown to be the most conservative. In this way it has been shown that wider specimens are more reliable in a fracture assessment of the examined steels. In this paper, the fracture probabilities of specimens in function of fracture toughness were determined as well, and it could be concluded that the widest specimens are the most likely to be broken for the same values of the fracture toughness.