Back to Search Start Over

Real-Time Measurements of Engine-Out Trace Elements: Application of a Novel Soot Particle Aerosol Mass Spectrometer for Emissions Characterization

Authors :
Lincoln Laboratory
Massachusetts Institute of Technology. Department of Civil and Environmental Engineering
Massachusetts Institute of Technology. Department of Materials Science and Engineering
Massachusetts Institute of Technology. Department of Mechanical Engineering
Cross, Eben
Sappok, Alexander Georg
Fortner, Elizabeth C.
Hunter, James Freeman
Wong, Victor W
Kroll, Jesse
Jayne, J. T.
Brooks, W. A.
Onasch, T. B.
Trimborn, A.
Worsnop, D. R.
Kroll, J. H.
Lincoln Laboratory
Massachusetts Institute of Technology. Department of Civil and Environmental Engineering
Massachusetts Institute of Technology. Department of Materials Science and Engineering
Massachusetts Institute of Technology. Department of Mechanical Engineering
Cross, Eben
Sappok, Alexander Georg
Fortner, Elizabeth C.
Hunter, James Freeman
Wong, Victor W
Kroll, Jesse
Jayne, J. T.
Brooks, W. A.
Onasch, T. B.
Trimborn, A.
Worsnop, D. R.
Kroll, J. H.
Source :
ASME
Publication Year :
2018

Abstract

Lubricant-derived trace element emissions are the largest contributors to the accumulation of incombustible ash in diesel particulate filters (DPF), eventually leading to filter plugging and an increase in engine fuel consumption. Particulate trace element emissions also pose adverse health effects and are the focus of increasingly stringent air quality regulations. To date, the rates and physical and chemical properties of lubricant-derived additive emissions are not well characterized, largely due to the difficulties associated with conducting the measurements. This work investigated the potential for conducting real-time measurements of lubricant-derived particle emissions. The experiment used the Soot Particle Aerosol Mass Spectrometer (SP-AMS) developed by Aerodyne Research to measure the size, mass and composition of submicron particles in the exhaust. Results confirm the ability of the SP-AMS to measure engine-out emissions of calcium, zinc, magnesium, phosphorous, and sulfur. Further, emissions of previously difficult to detect elements, such as boron, and low-level engine wear metals, such as lead, were also measured. This paper provides an overview of the results obtained with the SP-AMS, and demonstrates the utility of applying real-time techniques to engine-out and tailpipe-out trace element emissions. The SP-AMS used in this study was developed for real-time characterization of refractory particles (i.e. black carbon or soot) in the ambient atmosphere. The instrument consists of an intra-cavity laser (1064 nm) for particle vaporization followed by electron impact ionization and ion detection via a time-of-flight mass spectrometer. Application of the SP-AMS for engine exhaust characterization followed a two-part approach: (1) measurement validation, and (2) measurement of engine-out exhaust. Measurement validation utilized a diesel burner with precise control of lubricant consumption. Results showed a good correlation between CJ-4 oil consumption and mea<br />United States. Environmental Protection Agency (grant RD834560)<br />United States. Department of Energy (Contract DE-FG02-07ER84890 SBIR)<br />United States. National Aeronautics and Space Administration (Contract NNX10CA32C SBIR)<br />nited States. National Aeronautics and Space Administration (Contract NA09OAR4310125)<br />Camille and Henry Dreyfus Foundation (environmental chemistry postdoctoral fellowship)

Details

Database :
OAIster
Journal :
ASME
Notes :
application/pdf
Publication Type :
Electronic Resource
Accession number :
edsoai.on1049932982
Document Type :
Electronic Resource