A cyclic p-y elastoplastic model applied to lateral loaded pile in soft clays

The p-y method as a simplified analysis tool has been widely used to analyze the behavior of laterally loaded piles. This paper develops a novel cyclic p-y elastoplastic model within the framework of the single-surface bounding surface theory. The model can capture the soil stiffness degradation during cyclic loading by incorporating the cumulative plastic displacement to an interpolation function of the elastoplastic resistance coefficient. The model is relatively simple with only four parameters that can be determined from standard soil properties and stress-strain responses measured in direct simple shear tests. The performance of developed model is validated by predicting the cyclic lateral response of piles installed in soft clay during field and centrifuge tests published in the literature. The model can reliably simulate monotonic and cyclic responses of piles under different lateral loading patterns, and capture main characteristics of the pile-head load-displacement curve, such as nonlinearity, hysteresis, displacement accumulation, and stiffness degradation. It can also predict the evolution of the lateral deflection and sectional bending moment along the pile during cyclic loading. Key words: p-y curve, pile, lateral loading, bounding surface model, cyclic loading
1. Introduction In harsh offshore environmental conditions, offshore platforms and wind turbines supported by pile foundations are subjected to cyclic lateral loads due to wind, sea waves, and currents. Consequently, [...]