A microelectrode/microelectronic hybrid device for brain implantable neuroprosthesis applications

We have designed, fabricated, and characterized a microminiaturized 'neuroport' for brain implantable neuroprosthesis applications, using an analog CMOS integrated circuit and a silicon based microelectrode array. An ultra-low power, low-noise CMOS preamplifier array with integral multiplexing was designed to accommodate stringent thermal and electrophysiological requirements for implantation in the brain, and a hybrid integration approach was developed to fabricate a functional microminiaturized neuroprobe device. Measurements showed that our fully scalable 16-channel CMOS amplifier chip had an average gain of 44 dB, bandwidth from 10 Hz to 7.3 kHz, and an equivalent input noise of approximately 9 [micro][V.sub.rms] with an average power consumption per preamplifier of 52 [micro]W, which is consistent with simulation results. As a proof-of-concept demonstration, we have measured local field potentials from thalamocortical brain slices of rats, showing oscillatory behavior with an amplitude about 0.5 mV and a period ranging 80-120 ms. The results suggest that the hybrid integrated neuroport can form a prime platform for the development of a next level microminiaturized neural interface to the brain in a single implantable unit. Index Terms--Brain computer interface, integrated neural probe array, low-noise preamplifier, neuroprosthesis.