Analysis of aerodynamic and aeroacoustics of full scale landing gear

The aerodynamic noise of a landing gear is an important source of airframe noise. The analysis of its noise characteristics plays an important role in the design of a low-noise landing gear. Based on the FL-52 acoustic wind tunnel test technology, the coupled scale adaptive model and the acoustic disturbance equation, the results on aerodynamic noise of a full-scale landing gear model are analyzed. The high-fidelity model includes transverse strut, torsion arm, piston rod, wheel and other parts. The characteristics of static pressure distribution, power spectrum density of pulsating pressure, aerodynamic noise source distribution and directivity of overall sound pressure level are analyzed. The noise characteristics of the far-field microphone are compared with the local microphone installed in the wheel cavity. In this way, we characterize the directivity of pure tone in the wheel cavity and understand its contribution to the far-field noise. The results show that the aerodynamic noise of the landing gear can be quantified accurately by the hybrid numerical method. The pure tone has two frequencies inside and outside the wheel of the landing gear: 560 Hz and 960 Hz. The peak of the loudest sound pressure level reaches 136 dB, and the pure tone radiates to the surface of the non-separation area of the wheel of the landing gear. However, the wall pressure spectrum of the points located in the turbulence region shows a wide-frequency characteristic, and there is no obvious pure tone. From the point of view of the far-field noise directivity, the forward noise of the landing gear is larger than the rear noise, and there is a small overall sound pressure level area at the points of 65 and 110 degrees respectively. When the monitoring points are far away, the far-field noise of the landing gear shows the characteristics of wide frequency, and no obvious pure tone appears. The method can provide the technical support for predicting the aeroacoustics of a landing gear and designing a low-noise land gear.