Heat Transfer Analysis of Nanostructured Material Flow over an Exponentially Stretching Surface: A Comparative Study

The objective of the present research is to obtain enhanced heat and reduce skin friction rates. Different nanofluids are employed over an exponentially stretching surface to analyze the heat transfer coefficients. The mathematical model for the problem has been derived with the help of the Rivilin–Erickson tensor and an appropriate boundary layer approximation theory. The current problem has been tackled with the help of the boundary value problem algorithm in Matlab. The convergence criterion, or tolerance for this particular problem, is set at 10−6. The outcomes are obtained to demonstrate the characteristics of different parameters, such as the temperature exponent, volume fraction, and stretching ratio parameter graphically. Silver-water nanofluid proved to have a high-temperature transfer rate when compared with zinc-water and copper-water nanofluid. Moreover, the outcomes of the study are validated by providing a comparison with already published work. The results of this study were found to be in complete agreement with those of Magyari and Keller and also with Lui for heat transfer. The novelty of this work is the comparative inspection of enhanced heat transfer rates and reduced drag and lift coefficients, particularly for three nanofluids, namely, zinc-water, copper-water, and silver-water, over an exponentially stretching. In general, this study suggests more frequent exploitation of all the examined nanofluids, especially Ag-water nanofluid. Moreover, specifically under the obtained outcomes in this research, the examined nanofluid, Ag-water, has great potential to be used in flat plate solar collectors. Ag-water can also be tested in natural convective flat plate solar collector systems under real solar effects.