Comparative studies on in-plane shear behavior of masonry wallettes retrofitted with mortar, UHPC, and ECC ferrocement: Shotcrete and prefabricated panels

Masonry walls, prevalent in many historical and contemporary structures, often require retrofitting to meet modern safety and performance standards. Motivated by the need for efficient and reliable retrofitting solutions, this research investigates the potential of various types of ferrocement, reinforced with high-strength steel meshes, to enhance the in-plane shear behavior of brick masonry walls. Through rigorous diagonal compression tests on nine masonry wallettes, the study evaluated the performance of ferrocement overlays in terms of overlay configuration (asymmetric or symmetric), cementitious material type (mortar, ECC, or UHPC), the presence or absence of steel mesh, and construction method (shotcrete or prefabricated panels). The results indicated that UHPC and ECC overlays significantly enhanced post-cracking deformation capacity. Compared to the asymmetric retrofit, the symmetric retrofit led to more uniform deformation in the retrofitted wallette, effectively improving the maximum shear by up to 119 %. While UHPC shotcrete was more effective in improving the shear strength, ECC shotcrete led to the highest rupture shear strain and pseudo-ductility for the retrofitted wallette, reaching 0.83 % and 17.2, respectively. Moreover, although steel mesh inclusion in the ferrocement overlay was crucial in enhancing post-peak ductility, its impact on shear strength of the retrofitted wallettes was minimal. The test results also demonstrated that the developed prefabricated UHPC panels emerged as an effective retrofitting solution to simultaneously improve the strength, deformation capacity, and ductility for masonry wallettes. In addition to the experimental investigation, a new strength model, accounting for various key design variables, was developed, offering reliable shear strength predictions for the retrofitted wallettes.