The Effect of Glycerol on Microbial Community in Industrial Wastewater Treatment Plant

In this paper, a lab-scale reactor designed to simulate the operations of the North Water Saline Wastewater Treatment Plant (SWWTP) located in Delfzijl, The Netherlands, was constructed and assessed. Unlike conventional municipal wastewater treatment facilities, this industrial plant deals with wastewater containing stubborn chemicals that are difficult to break down, along with a high ratio of chemical oxygen demand (COD) to nitrogen and elevated sodium chloride levels. Furthermore, its treatment process diverges from standard industrial setups by employing an aerobic process preceding the anaerobic phase. The proposed lab-scale reactors were proven stable and effective in mimicking the conditions of the studied industrial SWWTP, particularly in the presence of abundant glycerol, a factor not explored in similar lab-scale models. Throughout the experiment, the removal of COD (specifically glycerol) and nitrogen were monitored, alongside changes in the microbial community within both reactors. The data enabled us to examine the proliferation of microbial populations within the sludge. The results indicated the complete removal of glycerol and ammonia from the system, with some residual nitrate detected in the effluent. The soluble COD decreased in the first reactor (R1) to approximately 50% of the influent and reduced further to less than 100 mg/L in the second reactor (R2), while nitrogen was majorly removed in the R1. By the experiment’s conclusion, Actinomycetales was identified as the dominant order in the anaerobic reactor (sometimes even exceeding 70% of the population), which is known for its utilization of glycerol as a carbon source and its tolerance to high salt concentrations in the influent. Conversely, the aerobic reactor was predominantly inhabited by the order Flavobacteriales, which correlates with ammonia concentration.