Back to Search Start Over

Channel Modeling and Over-the-Air Signal Quality at 3.5 GHz for 5G New Radio

Authors :
Elijah I. Adegoke
Erik Kampert
Matthew D. Higgins
Source :
IEEE Access, Vol 9, Pp 11183-11193 (2021)
Publication Year :
2021
Publisher :
IEEE, 2021.

Abstract

With the next generation of mobile communication being trialled across the world, 5G New Radio (NR) promises to provide a flexible radio interface that fits a diverse range of use cases. As trials and pilots progress, propagation studies are required that evaluate electromagnetic (EM) propagation effects for 5G NR signals. In this article, 5G NR signals are used to evaluate the over-the-air (OTA) error vector magnitude (EVM) within a line-of-sight (LoS) rural/urban environment. For the same receiver locations, time dispersion and propagation loss were measured via the root mean square (RMS) delay spread and path loss. The transmitter-receiver distance investigated ranged from 60 m to 450 m. From the measurement campaign, the path loss exponent (PLE) using a directional antenna at the receiver was 1.98, and 1.82 with an omnidirectional antenna. The root mean square error (RMSE) of the floating intercept/close-in (FI/CI) models for the path loss was 4.96/4.74 and 3.84/3.23 for directional and omnidirectional receivers. The delay spread using a cross polar configuration showed significant increase and a dependency of the delay spread on the path loss was observed. For the measurement route, the mean delay spread was 24 ns and 35 ns for directional and omnidirectional measurements. With regards to the EVM, 16 and 64-QAM transmissions were robust along the entire route for directional and omnidirectional antennas, whereas 256-QAM worked in locations where there was minimal obstruction to the propagation path. The average EVM (%) for 16, 64 and 256-QAM measured along the route was 4.5/5.3/3.9 and 3.4/4.3/3.6 for omnidirectional and directional antennas. The OTA results also show that using a directional antenna (as the receiver) significantly improves the obtainable signal quality of 5G NR signals and also reduces outages for higher modulation schemes. With the measurement results presented, system designers can design efficient receivers, estimate coverage and adequately provision services using 5G NR on the sub-6 GHz frequency band.

Details

Language :
English
ISSN :
21693536
Volume :
9
Database :
Directory of Open Access Journals
Journal :
IEEE Access
Publication Type :
Academic Journal
Accession number :
edsdoj.862dd5a55244659aeb4b1ef1534b28
Document Type :
article
Full Text :
https://doi.org/10.1109/ACCESS.2021.3051487