Adaptive Residual Life Prediction for Small Samples of Mechanical Products Based on Feature Matching Preprocessor-LSTM

In order to solve the problem of predicting the residual life of mechanical products accurately based on small-sample data, this paper proposes a small-sample adaptive residual life prediction model of mechanical products based on feature matching preprocessor-LSTM. First, aiming at the problem of low accuracy of remaining life prediction for small samples of mechanical products caused by multiple time scales and multiple fault states, the failure time data and performance degradation data are fused, and the failure rate and standard deviation are used as the remaining life prediction criteria to intuitively reflect The possibility of failure of a component or system at a certain point in time. Considering the demand of adaptive small-sample residual life prediction data, this paper establishes the adaptive matching pre-processor model of life characteristics. On this basis, the LSTM neural network is used to establish a small-sample adaptive residual life prediction model. Then, the XJTU-SY bearing life data set and the test data of the small-sample life characteristics measured by the RV reducer are used as the research objects, and a small amount of the data set is randomly selected. The remaining life expectancy is predicted from the sample data and compared with its standard remaining life, respectively. The comparison results show that the overall prediction error is small. This study shows that the remaining life prediction model established can better predict the remaining life of mechanical product sub-sample data and provides a feasible method for predicting the remaining life of mechanical product sub-samples.