Laboratory investigation on inhibition of polyvinyl alcohol used for wireline coring drilling

Abstract To address the problems of wall collapse, cuttings slurrying, and scaling on the inner wall of the drill pipe, which often occur in small-diameter diamond wireline core drilling, the inhibition properties of polyvinyl alcohol (PVA) was investigated, and the formulation of solids-free drilling fluid with PVA as the inhibitor were completed. PVA has the advantages of fast adsorption and easy regulation of rheological properties Firstly the inhibition effect of PVA was compared with that of common inorganic salts (sodium chloride, NaCl, potassium chloride, KCl) by bentonite dispersion test, linear swelling test, shale rolling recovery test and mud ball immersion test in this study. Then, the inhibition mechanism of PVA was analyzed with potentiometric particle size tests, Fourier transform infrared (FT-IR) and X-ray Diffraction (XRD) measurements. Based on the outstanding inhibition performance of PVA, tackifiers and filtration reducers were preferred through the compatibility test. And finally, the effects of various contaminants on the comprehensive performance of the formulated solids-free drilling fluids were evaluated. The results showed that PVA exhibited better inhibition of clay hydration and dispersion in shale recovery and linear swelling compared to NaCl and KCl, which was particularly evident in the mud ball immersion test. FT-IR and XRD tests revealed that the inorganic salts were used to replace the cations with larger radius and high degree of hydration in the clay layer by ion exchange ti achieve the effect of clay de-watering by reducing the spacing of the clay interlayer and the electrostatic repulsion between the particles. However, PVA is strongly adsorbed on the clay surface in the form of hydrogen bonds due to its unique multi-hydroxyl chain structure, forming a hydrophobic barrier to prevent water molecules from entering the clay layer, thus inhibiting the hydration and swelling of the clay. Using PVA as an inhibitor, compounded with xanthan gum, sulfonated lignite resin and sulfonated gilsonite (FT-1), the solids-free drilling fluid is promising for use in diamond wireline core drilling in complex formations.