Indoor residual spray bio-efficacy and residual activity of a clothianidin-based formulation (SumiShield® 50WG) provides long persistence on various wall surfaces for malaria control in the Democratic Republic of the Congo

Abstract Background Bio-efficacy and residual activity of SumiShield® 50WG (50%, w/w) with active ingredient clothianidin, a neonicotinoid compound, was assessed using an insecticide-susceptible laboratory strain of Anopheles arabiensis. Implications of the findings are examined in the context of potential alternative insecticides for indoor residual spraying in Lualaba Province, Democratic Republic of the Congo. Methods Contact surface bioassays were conducted for 48 weeks on four types of walls (unbaked clay, baked clay, cement, painted cement) in simulated semi-field experimental conditions using two different doses of clothianidin active ingredient (200 mg ai/sq m and 300 mg ai/sq m). Additionally, two types of walls (painted cement and baked clay) were examined in occupied houses using the 300-mg dosage. Laboratory-reared An. arabiensis were exposed to treated surfaces or untreated (controls) for 30 min. Mortality was recorded at 24-h intervals for 120 h. Results Under semi-field experimental conditions, there was no significant difference in mortality over time between the two doses of clothianidin. The mortality rates remained above 60% up to 48 weeks on all four wall surface types. The formulation performed better on cement and unbaked clay with a mean final mortality rate above 90%. Under natural conditions, there was no significant difference in response between baked clay and painted cement walls with a mean final mortality rate above 90%. The insecticide also performed significantly better in natural settings compared to semi-field experimental conditions. Conclusion Depending on the type of experimental surface, the residual activity of the two doses of clothianidin was between 28 and 48 weeks based on a 60% mortality endpoint. Clothianidin at 300 mg ai/sq m applied on two house walls (baked clay or painted cement) performed equally well (> 80% mortality) on both surfaces up to week 41 (approximately 9.5 months). Extended bioassay holding periods (up to 120 h) may present with excess natural mortality in the untreated controls, thus complicating analysis.