Melt Pool Changes Characterization in Laser-Processed H11 Hot Work Tool Steel Using Point-by-Point Scanning Mode towards LPBF Process Optimization

Additive manufacturing techniques employing laser-based metal melting have garnered significant attention within the scientific community. Despite a decade of comprehensive research on the fundamentals of these techniques, there still remain unexplored facets related to heat flux impact on metallic alloys’ properties. Particularly, the effects of point-by-point laser operation on melt pool formation in metallic materials still remain unclear. Thus, this study focuses on the implications of laser metal melting, particularly investigating a point-by-point laser mode operation’s influence on melt pool formation and its geometry in the phase-transformation-sensitive material H11 hot work tool steel. To examine the melt pool, singular laser tracks with various laser parameters were scanned across H11 sheet metal, which allowed for the elimination of layer-by-layer heat cycles’ influence on the melt pool’s microstructure. Samples were examined by means of metallography, revealing significant differences in the melt pool’s depth, influenced mostly by exposure time rather than volumetric energy density. Heat-affected zone effects were found to have a limited range and thus potentially marginal effects in layer-by-layer manufacturing conditions. At the same time, retained austenite concentrations near fusion lines have been found within melt pools, suggesting potential micro-segregation of the alloying additions. The results present guidelines towards laser melting processes optimization.