Sequential Error Disentanglement of Three-Phase Current Sensor for AC Machine in Standstill Conditions

This article proposes a compensation method for gain and offset errors in the current sensing of three-phase AC machine drives with three current sensor measurements during exact or close to standstill conditions. Errors are treated sequentially based on the elliptical trajectory method, a mathematical manipulation by demodulating faulted time-varying $d,q$ currents using the machine position. As three current sensors are used, a correction factor through measured neutral current is proposed such that the impact of machine resistance deviation and inverter non-idealities are minimized. The method does not incorporate any additional hardware, making it low-cost and straightforward in its implementation. It is proposed as a tool for initial commissioning before the machine runs. It is robust to rotor position perturbations and does not need a mechanical lock for compensation in standstill conditions. The effectiveness of the suggested approach is shown by analysis, modelling, and experimental findings acquired from a hardware prototype by mimicking the actual use of high-precision mechatronics.