Evaluation of Bruising Susceptibility and Response of Pears under Impact Loading through Finite Element Analysis

Mechanical damage and bruising of fruit is a critical problem in the food industry. Minimizing brusing and damage can be achieved by designing energy-absorbing structures and packaging systems in order to ensure the long-term quality of fresh produce. The aim of this study is to investigate the response and bruise susceptibility of pears under impact loading conditions through finite element analysis (FEA) methods. In this paper, three impact heights (0.25 m, 0.5 m, and 1.0 m), four impact material surfaces (poplar wood, rubber, cardboard, and acrylonitrile butadiene styrene (ABS) plastic), two packaging sizes (standard 0.22″ and sandwich lattice 2.1″), and three impact design structures (rigid, corrugated, and honeycomb) are considered. Based on mesh sensitivity analysis, a mesh element of 1.5 mm was adopted for all simulations, assuring the accuracy of results and considering the trade-off between mesh size and computational time. The response surface analysis approach was utilized in order to develop predictive empirical models related to pear bruising. Results revealed that the rubber-based impact platform yielded minimal bruise susceptibility at all heights, while standard-sized corrugated cardboard performed best at a height of 0.25 m. Furthermore, single, double, and triple layers of packaging cardboard were tested. We observed that adding a second soft layer of corrugated cardboard reduced the stress on the pear by around 33%. However, adding a third layer only reduced stress by 5%. The 3D-printed honeycomb ABS has potential as protective packaging but would require further investigations and parameter optimization. Stacking multiple layers of cardboard on top of each other is a cost-effective solution that could improve damping and, therefore, ensure good quality and increase the shelf life of the fresh produce. This study will help decision-makers select the optimal energy-absorbing material for cushioning and packaging designs in order to improve the handling and post-harvesting logistics of fresh produce.