Economic and thermal performance analysis of two-stage thin-film solar thermoelectric power generator

One of the performance enhancement strategies in thermoelectric technology is application of two-stage leg instead of normal single stage leg structure. However, for a thin-film solar thermoelectric generator applying this strategy requires many in-depth considerations including economic -cost and reliability aspects. In this research, attempts are made to identify the economic and performance characteristics of a two-stage thin-film solar thermoelectric generator under various geometrical conditions and then compare with normal single stage configuration. Generally, in addition to being cost-effective compared to the single-stage design, the double-stage design can produce more power if the appropriate material is selected. The results of numerical simulations show that the use of bismuth tellurides in single stage thermoelectric generator (SATEG) legs improves the performance of the system in terms of power generation. But the use of skutterudites in the lower layer and bismuth tellurides in the upper layer of the two-stage case, in addition to increasing the output power, significantly reduces the dollar/watt value. Furthermore, the highest output power and exergy efficiency are obtained in the lower layer angle ratio of 0.8–1 and in the upper layer angle ratio of 2. Among the geometrical parameters, the radius of heated area (Rh) has the greatest effect on the performance of double-stage solar annular thermoelectric generator (DSATEG). The highest power output is obtained at Rh = 1.5, which is equal to 1.323W.