Enhancing PV solar panel efficiency through integration with a passive Multi-layered PCMs cooling system: A numerical study

Photovoltaic (PV) solar cells are at the forefront of sustainable electricity generation technologies, yet they exhibit relatively low efficiency. Typically, less than 20 % of the solar energy absorbed is converted into electrical energy, with the remainder converts into heat. This heat increases the PV panel's operating temperature, negatively impacting its efficiency and life expectancy. To mitigate this, a novel approach using multi-layered phase change materials (PCMs) has been examined in this study. The approach involves integrating organic PCMs (OPCMs) with metallic PCMs (MPCMs), enhancing PV panel cooling efficiency by attaching the multi-layer PCM to the panel's rear. This study, employing ANSYS FLUENT software's solidification and melting model, explores the impact of multi PCM layers thickness and total multi layers thickness on PV cell temperature and electrical efficiency. The analysis reveals that a multi-layered PCMs configuration with a thickness ratio of 15:85 between MPCM (CERROLOW-117® alloy) and OPCM (RT44) significantly decreases temperature rise in PV cells, resulting in a temperature drop of 59.6 °C. This improvement boosts PV panel performance by an average of 35.8 % compared to panels lacking cooling systems during peak sun hours under hot climate conditions characterized by ambient temperatures of 40 °C and high solar radiation exceeding 1000 W/m². This suggests that a carefully optimized PCM layering approach could markedly improve PV system efficiency, offering a practical solution to the overheating problem and extending the operational life of PV installations.