The Effect of a Dual-Layer Coating for High-Capacity Silicon/Graphite Negative Electrodes on the Electrochemical Performance of Lithium-Ion Batteries

Silicon-based electrodes offer a high theoretical capacity and a low cost, making them a promising option for next-generation lithium-ion batteries. However, their practical use is limited due to significant volume changes during charge/discharge cycles, which negatively impact electrochemical performance. This study proposes a practical method to increase silicon content in lithium-ion batteries with minimal changes to the manufacturing process by using dual-layer electrodes (DLEs). These DLEs are fabricated with two slurries containing silicon and graphite as active materials. Notably, the electrode with the silicon as the outermost layer on top of the graphite layer (Si-on-top) demonstrated a superior initial capacity of 935 mAh/g and retained 70% of its capacity (537 mAh/g) after 100 cycles at 0.5 C. In contrast, a single-layered electrode (SLE) with a silicon–graphite mixture retained only 50.3% of its capacity (370 mAh/g) under the same conditions. These findings suggest that DLEs, particularly with the silicon layer located on top, effectively increase silicon content in the negative electrode while remaining compatible with existing manufacturing processes. This approach offers a realistic strategy for enhancing the performance of lithium-ion batteries without significant process modifications.