Rapid degradation of perfluorooctane sulfonic acid (PFOS) and perfluorononanoic acid (PFNA) through bimetallic catalyst of Fe2O3/Mn2O3 and unravelling the effect of support SiO2

Perfluoroalkyl substances (PFAS) are emerging contaminants present in various water sources. Their bioaccumulation and potential toxicity necessitate proper treatment to ensure safe water quality. Although iron-based monometallic photocatalysts have been reported to exhibit rapid and efficient PFAS degradation, the impact of bimetallic photocatalysts is unknown. In addition, the mechanistic effects of utilizing a support are poorly understood and solely based on physicochemical properties. This study investigates the efficacy of bimetallic photocatalysts (Fe2O3/Mn2O3) in inducing the photo-Fenton reaction for the degradation of perfluorooctane sulfonate (PFOS) and perfluorononanoic acid (PFNA) under various conditions. The rapid removal of both PFAS was observed within 10 min, with a maximum efficiency exceeding 97 % for PFOS under UV exposure, aided by the photocatalytic activation (photo-Fenton) of the oxidant (H2O2). Contrary to expectations, the use of the SiO2 support material did not significantly improve the removal efficiency. The efficacy of PFNA decreased despite SiO2 providing larger surface areas for Fe2O3/Mn2O3 loading. Further analysis revealed that the adsorption of PFAS onto the catalyst surfaces owing to electrostatic interactions contributed to the removal efficiency, where the degradation efficacy was worse than that of the catalyst with SiO2. This is because adsorption hindered the effective contact of H2O2 with catalytic reaction sites, thereby impeding the generation of hydroxyl (·OH) radicals. This study indicates the importance of considering chemical properties, including surface charge, in catalyst design to ensure effective degradation, focusing on physicochemical properties, such as surface area might overlook crucial factors.