ASSESSMENT OF SOLAR PV OUTPUT PERFORMANCE WITH VARYING TILT ANGLES AND WEATHER DATA FROM ERA5: CASE OF MUNTINLUPA CITY, PHILIPPINES

Solar photovoltaic (PV) technology has been gaining popularity in the Philippines as an alternative source of sustainable energy. In such technology, module tilt angle and weather conditions are among the system parameters that have substantial impacts on PV system performance. Previous studies have considered either tilt angles or weather conditions, but not the combined impact of these two parameters on solar PV power output. The objective of this study is to examine the effects of weather variables and tilt angle on the output of solar photovoltaic (PV) systems in Muntinlupa City, the Philippines. Three 120W monocrystalline solar PV panels were used and set up to three different tilt angles (i.e., 5°, 10°, and 15°). The fifth generation of the ECMWF's global climate and weather reanalysis (ERA5) dataset was used to gather hourly weather information such as surface solar radiation, wind speed, wind direction, relative humidity, ambient temperature, and total precipitation. Three principal components (PC), which together account for 95% of the variability, were identified using principal components analysis (PCA), which was used to address multicollinearity among the weather parameters. To assess the effects of tilt angle, time, and PCs on solar PV production, analysis of covariance (ANCOVA) was carried out. Results show that all weather variables, except for wind speed and total precipitation, have a significant impact on solar PV production with configuration producing the best results. Moreover, a significant difference in mean solar PV production was observed among the three tilt angles. From 6:00 AM to 2:00 PM, solar PV output gradually increases and declines thereafter. Outputs this study can help in optimizing the design and configuration of solar PV systems in the Philippines by considering weather variables and module tilt angle. Lastly, this study provides useful information for system designers, installers, and policymakers in improving energy generation and utilization, encouraging the use of renewable energy sources, and advancing sustainable energy objectives.