MHD double diffusive mixed convection and heat generation / absorption in a lid-driven inclined wavy enclosure filled with a ferrofluid

The magneto-hydrodynamics (MHD) double-diffusive mixed convection and heat generation/absorption in a lid-driven inclined wavy enclosure filled with (Fe3O4/ water) ferrofluid is quantitatively investigated in this paper. The present study focuses on improving the efficiency of mass and thermal performance of a system. Both the left and right sidewalls of the cavity are allowed to move with a constant velocity in the upward and downward directions, respectively. The finite difference approach was applied to discretize the subsequent governing equations followed by the Bi-Conjugate Gradient Stabilized (Bi-CGStab) method to solve them. The numerical simulation was performed for a variety of parameters, including the Hartmann number varied as 0 ≤ Ha ≤ 45, the inclination angle of the enclosure varied as 0° ≤ δ ≤ 180°, the buoyancy ratio varied as -2 ≤ N ≤ 2, heat generation or absorption parameter varied as −10 ≤ Qo ≤ 10, Richardson number varied as 0.01 ≤ Ri ≤ 10, and solid volume fraction varied as 0 ≤ ϕ ≤ 0.06. The numerical simulation results were presented in terms of streamlines, isotherms, isoconcentrations, average Nusselt number, and average Sherwood number. The heat and mass transfer rates were found to decrease with the increase in Ha but increase with N, Ri, and Φ. Also, both of them reach their peak values at Ri = 10. In addition, the heat generation parameter enhances both thermal and mass performance as they reach their maximum values at Qo = 10. Increasing the heat generation factor from Qo = 5 to Qo = 10 increases the Nusselt number by 3.5 times. The outcomes of the study have significant importance for modern industrial applications specifically in the discipline of electronic device cooling.