2D heterostructures of graphene oxide and MoS2 to improve sensitivity performance of flexible pressure sensor with shell biological structure

Inspired by the multilayer structure of the shellfish, a novel two-dimensional (2D) composite structure consisting of graphene oxide, MoS2 and graphene oxide (G/M/G) was integrated to the flexible pressure sensing. The composite structure was prepared by the vacuum suction filtration in order to imitate the high toughness of shellfish. Based on the strategy of strain engineering, a comprehensive experimental bench capable of meeting different strain conditions was connected to a push–pull meter and an LCR digital bridge, and then a computer was used to record the changes in transducer capacitance when an external load was applied to the meter. Graphene oxide (GO) and G/M/G supercells were constructed, and density functional theory (DFT) simulations of the initial energy band structure under strain-free conditions were carried out to determine the relationship between the band gap, conductivity, capacitance, and sensitivity of the G/M/G structure based on band gap theory, and to easily understand the mechanism of the shellfish heterostructure leading to enhanced sensitivity of the sensors. Using two-point bending and axial tensile tests, a flexible pressure sensing device was designed to realize positive strains in the ranges of 0%–5 % and 5%–50 %. The results show that the sensitivity of both GO and G/M/G capacitive pressure sensors decreased with increased strain, and the sensitivity of the G/M/G sensors was significantly improved by 75%–102 % compared to the GO sensors at the same strain. The parallel-plate capacitor model and crack growth theory well explain the experimental results at small and large strains. Our results provide new concepts for the design of novel flexible sonar with high sensitivity and large strain operating range by a simple vacuum filtration method, which can be extended to the design of other high-performance 2D flexible electronic devices.