Freeze–Thaw Pre-Treatment of Cassava Tubers to Improve Efficiency of Mechanical Peeling

The effect of a freeze−thaw pre-treatment (FTP) on the peeling process of cassava tubers was investigated in this study. The length and weight of the cassava tubers varied from 200 to 280 mm and 500 to 900 g, respectively. A prototype abrasive cassava peeling machine was used. The operational parameters were the rotational speed of the brushes (550−1150 rpm), peeling time (1−5 min), thawing temperature (50−90 °C), and incubation time of the thawing treatment (0−120 s). Response surface methodology was applied to optimize FTP to improve the peeling process of cassava tubers. Peeled surface area and peel loss were measured as the responses. Results revealed that the peeled surface area and peel loss were significantly influenced by the rotational speed of the brushes, peeling time, and the incubation time of the thawing treatment (p < 0.05). Under optimal peeling conditions, with a rotational speed of 1000 rpm, a peeling time of 3.4 min, a thawing temperature of 59 °C, and an incubation time of 90 s, the peeled surface and the peel loss were approximately 99.5 and 19%, respectively. The results show that the use of FTP can improve cassava peeling by softening the peels and increasing the peeled surface area.