Direct Power Control Method With Minimum Reactive Power Reference for Three-Phase AC-to-DC Matrix Rectifiers Using Space Vector Modulation

This paper proposes a direct power control (DPC) method with a minimum reactive power reference for ac-to-dc matrix rectifiers using space vector modulation. Based on the calculated active and reactive power reference values, the developed DPC algorithm directly controls both the active and reactive power components of the source by operating the three-phase matrix rectifiers, thereby obtaining the sinusoidal input currents and output dc voltage/current of the rectifier. The proposed DPC method instantaneously determines a source reactive power reference command to achieve a unity input power factor or maximum achievable power factor on given input and output conditions, because ac-to-dc matrix rectifiers cannot always attain a unity power factor due to the existence of the input capacitors. In addition, the developed algorithm calculates the minimum reactive power reference without using any circuit parameters. Thus, the proposed algorithm is free from any inevitable parameter uncertainty, resulting in a more robust and accurate power factor control for the rectifier. Based on the minimum reactive power reference, the proposed algorithm enables matrix rectifiers to operate at an input power factor that can be maximally obtained at all times. The effectiveness of the proposed method was verified by the simulations and experiments.