Investigation of fracture characteristics of cracked granite suffered from different thermal treatments and water-cooling time

Rock mass may be exposed to high temperature and cooled by water in fire, geothermal resource exploitation and deep underground engineering, which affects the safety of these engineering. In this study, cracked straight through Brazilian disc (CSTBD) specimen was used to study the fracture properties of granite treated with different water-cooling time from 25 °C to 800 °C. A camera was used to record the fracture process of the specimen, the evolution of strain at the specimen surface was obtained by using digital image correlation technology, and the morphological characteristics of fracture surface were observed by using scanning electron microscopy. The results show that water-cooling time has some effects on fracture properties of granite, but its effect is less than the temperature. With the increase of water-cooling time, the mode I fracture toughness decreases first, then increases and finally decreases at the same temperature, and the fracture toughness ranges from 0.419 MPa m1/2 to 0.567 MPa m1/2 at 400 °C. The crack tip opening displacement (CTOD), crack propagation path and fracture surface are related to the energy released during the specimen failure. When the temperature is 25 °C or 200 °C, the energy released is large and the fracture surface is relatively flat with irregular sharp edges, the main cracks are straight lines. At 600 °C, the main crack is zigzag, the CTOD and the maximum principal strain in order can reach 0.143 mm and 0.731 %. This study can help to understand the effect of water-cooling time on engineering rock mass.