Calculation of conveyor system

Diplomsko delo Preračun transportne naprave opisuje načrtovanje in preračun členkastega transporterja. Na začetku diplomskega dela je uvod, v katerem so opisani namen, cilji in zahteve diplomskega dela. Temu sledi opis transportnih naprav. Glede na podane robne pogoje, ki so določeni od ostalih naprav, lahko izračunamo potrebno moč pogonskega motorja za transporter. Za konec diplomskega dela smo še modelirali transportno napravo s pomočjo programskega paketa Creo Parametric 2.0. Bistveno pri modeliranju je bilo sestavljanje pogonske enote in sestava vseh standardnih delov. Transporter je narejen tako, da prejema večje število steklenic in jih razvrsti v vrsto eno za drugo. Celotno diplomsko delo je bilo opravljeno v okviru praktičnega usposabljanja v podjetju ICS d.o.o. The diploma thesis Calculation of conveyor system, describes a designing and calculating the articulated conveyor. At the beginning of the thesis is the introduction, which describes the purpose, objectives and requirements of the thesis. This is followed by a description of the transport devices. According to the given boundary conditions, which are determined from other transport devices we can calculate the required power needed by the electric motor of the conveyor. At the end of the thesis, we have modeled the transport device using the software package Creo Parametric 2.0. It is essential for modeling the assembly of the drive unit and the composition of standard parts. Conveyor is designed to receive a greater number of bottles and placing them in series of one for the other. The entirte diploma thesis was conducted within the practical training at the company ICS d.o.o.