Hydrinimo procesų indukuoti struktūriniai virsmai Mg-Ni dangose

We investigated thin film samples of Mg2NiH4 with two intentions. First of all, we wanted to ascertain if the same nanomaterial (Mg2NiH4) prepared by magnetron sputtering and ball milling can exhibit different hydrogen storage properties and to see possible advantages/disadvantages of employing of magnetron sputtering for synthesis of nanometerials for hydrogenstorage. Furthermore, we wanted to see if thin film samples of Mg2NiH4 could be used in a switchable mirror or window device by utilizing the high to low temperature transition at about 510 K. In powder samples, this transition, between a monoclinic conducting low temperature phase to an FCC non-conducting high temperature phase, have been demonstrated in a mechanical reversible conductor–insulator transition [Blomqvist and Nor��us, J. Appl. Phys 91(2002)5141]. The new thin film Mg2NiH4 samples were produced by reacting hydrogen with magnetron sputtered Mg2Ni films on quartz glass or CaF2 substrates. But we could not obtain the monoclinic low temperature phase upon cooling the samples. Instead a cubic phase, related but not identical to the cubic high temperature phase, was formed at temperatures both below and above 510 K. TEM pictures revealed the new cubic phase in the films to have the same cell parameter as the FCC high temperature phase. But the symmetry was lower with similar streaking patterns as observed for the monoclinic low temperature phase. IR-spectroscopy indicated an identical vibrational frequency for... [to full text] Tiriamojo darbo metu magnetroniniu garinimu suformuotos Mg-Ni dangos, kurios hidrintos esant aukštai temperatūrai ir vandenilio slėgiui. Hidrintos dangos ištirtos įvairiais analizės metodais, siekiant nustatyti magnetronio garinimo būdu suformuotos medžiagos (magnio nikelio hidrido) skirtumus nuo rutulinio trynimo metodu gautos analogiškos medžiagos. Darbe išanalizuoti duomenys ir pateiktas aiškinamasis modelis, kuris atskleidžia plonų dangų ypatybes, dėl kurių dangose pilnai neįvyksta dangos relaksacijos procesai. Nustatyta, kad dėl tų pačių priežasčių, dangų panaudojimo „įjungiamiesiems veidrodžiams“ galimybės yra ribotos.