The Optimal Start Timing of Helical Scan for Coronary CT Angiography and CT Myocardial Perfusion Scan Using 64-MDCT

Purpose Ichihara et al. (Fujita Med J 2015; 1(1): 9-14) developed a method to simultaneously obtain both coronary computed tomography (CT) angiography and CT myocardial perfusion (CTP) using 64-multi detector CT (MDCT). An input-function (time enhancement curve, TEC) of the ascending aorta (Ao) and myocardial CT density are necessary to calculate absolute myocardial blood flow (ml/g/min) using a two-compartment model. Helical scan starting timing is important to capture the peak (P) of Ao time enhancement curve (TEC). The purpose is to search the optimal timing of starting helical scan to capture the P. Methods We performed 14 CTPs using Definition AS+ (SIEMENS). A dynamic scan at the Ao level was started at 7 s after contrast injection and helical scan was started at various trigger on bolus tracking. Definition AS+ needs 2 s (other scanner may need 4 s) for changing from a dynamic to helical scan mode. We created TECs of pulmonary artery (PA) and Ao using the fifth function fitting. We measured the time from trigger point to the P (t200, t250, t300 and tCP). Results Mean t200, t250, t300 and tCP were 9.1±1.9, 7.9±2.0, 6.6±1.9 and 3.9±1.2 s, respectively. In additional other 16 CTP studies using the cross point method, we can capture the P in all (100%) examinations. Conclusion Scan starting at the cross point is best for Definition AS+, and the Ao=300 HU may be best for other scanner that needs 4 s for changing scan mode to obtain a fine input function for calculating absolute myocardial blood flow.