Effect of High Pressures in Combination with Temperature on the Inactivation of Spores of Nonproteolytic Clostridium botulinum Types B and F

The impact of high pressure processing on the inactivation of spores of nonproteolytic Clostridium botulinum is important in extended shelf life chilled low-acid foods. The three most resistant C. botulinum strains (Ham-B, Kap 9-B, and 610-F) were selected for comparison of their thermal and pressure-assisted thermal resistance after screening 17 nonproteolytic C. botulinum strains (8 type B, 7 type E, and 2 type F). Spores of strains Ham-B, Kap 9-B, and 610-F were prepared using a biphasic media method, diluted in N-(2-acetamido)-2-aminoethanesulfonic acid (ACES) buffer (0.05 M, pH 7.00) to 105 to 106 CFU/mL, placed into a modified sterile transfer pipette, heat sealed, and subjected to a combination of high pressures (600 to 750 MPa) and high temperatures (80 to 91°C) using laboratory and pilot-scale pressure test systems. Diluted spores from the same crops were placed in nuclear magnetic resonance tubes, which were heat sealed, and subjected to 80 to 91°C in a Fluke 7321 high precision bath with Duratheram S oil as the heat transfer fluid. After incubation for 3 months, survivors in both studies were determined by the five-tube most-probable-number method using Trypticase-peptone-glucose-yeast extract broth. The highest (>5.0) log reductions in spore counts for Ham-B, Kap 9-B, and 610-F occurred at the highest temperature and pressure combination tested (91°C and 750 MPa). Thermal D-values of Ham-B, Kap 9-B, and 610-F decreased as the process temperature increased from 80 to 87°C, decreasing to