In situ growth of copper-based metal-organic framework on a helical shape copper wire as a sorbent in stir-bar sorptive extraction of fenthion followed by corona discharge ion mobility spectrometry

In this paper, a helical copper wire, coated with copper-benzene-1,4-dicarboxylic acid metal-organic framework (Cu-BDC) was used as a sorbent for stir-bar sorptive extraction of fenthion from water and fruit samples. The homogenous coating was fabricated through two simple and fast steps. The chemical conversion of copper substrate to copper hydroxide nanotubes (Cu(OH)2 NTs) was performed in an alkaline solution and then Cu-BDC was formed through a neutralization reaction. Corona discharge ion mobility spectrometry in positive mode was applied for the detection of fenthion. To improve the sensitivity of the method, some synthesis and extraction parameters affecting the extraction efficiency such as benzene-1,4-dicarboxylic acid concentration, ionic strength, sample pH, stirring rate, extraction temperature, and extraction time were investigated. The linear dynamic range between 0.5 and 80 μg L-1 and detection limit of 0.1 μg L-1 were obtained under optimal conditions. The intra- and inter-day relative standard deviations were less than 6.4 and 8.6%, respectively. The applicability of the method was examined for the analysis of different samples (i.e., well water, agricultural wastewater, and orange). The recovery for the determination of fenthion in spiked samples varied from 88 to 111%.