Physical and Mechanical Properties of Oriented Strand Board Made from Eastern Canadian Softwood Species

This study aims to investigate the feasibility of producing OSB from softwood species used in the Eastern Canadian softwood lumber industry in the context of the overcapacity of softwood chips traditionally produced for the pulp and paper industry. Balsam fir, black spruce, and jack pine logs were used to make 15 mm thick OSB panels with a target density of 600 kg/m3. The panels were manufactured at a temperature of 210 °C during a pressing cycle of 300 s. Strands with different thicknesses were used to obtain a constant specific surface of 6.7 m2/kg for the three species. The bending modulus of the rupture and modulus of elasticity, internal bond, and thickness swelling of the OSB panels were determined and compared to the CSA standard requirements. The species significantly affected the physical and mechanical properties of OSB. The bending properties of OSB decreased with an increase in the species wood density. The internal bond strength of OSB increased with the increase in species wood density. The panels made from softwood species showed physical and mechanical properties exceeding the standard requirements, except for high thickness swelling. The combination of softwood and aspen strands significantly improved the thickness swelling of softwood-based OSB. The reduction in the surface layer density could also be explored to reduce the thickness swelling of the OSB made from the softwoods considered in this study.