Back to Search Start Over

Validation of Low-Cost Driving Simulator Based on Continuous Speed Profiles

Authors :
Ana María Pérez-Zuriaga
Javier Marín-Morales
David Llopis-Castelló
Juan F. Dols
Francisco Javier Camacho-Torregrosa
Alfredo García
Source :
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia, instname
Publication Year :
2016
Publisher :
Transportation Research Board, 2016.

Abstract

[EN] The number of road safety studies that are based on driving simulators is growing significantly. The Polytechnic University of Valencia, Spain, developed a low-cost driving simulator for the assessment, training, and rehabilitation of drivers (SE2RCO). The main objective of this research was the validation of the driving simulator so that studies about road safety and highway geometric design that considered human factors could be performed. The validation was based on continuous speed profiles collected from 28 volunteers on a 30-km-long, two-lane rural road section. The same volunteers drove through the same road section built in SE2RCO. Speed data of 79 curves and 52 tangents were selected for the analysis. Comparison of the real and simulated speeds ensured the simulator's objective validity according to average and operating speeds. Two models were developed to predict field speeds from simulated speeds. Results showed that a simulated average speed lower than approximately 90 km/h was linked to a similar real average speed. For higher simulated speeds, the average speed in the real environment was lower than the simulated one. In addition, the actual operating speed was around 5 km/h lower than the operating speed in the driving simulator. Most volunteers assessed the quality and similarity of the virtual environment compared with the real world as medium or high and assessed the driving tasks similarly, thus achieving subjective validation of the simulator.<br />The authors thank the Polytechnic University of Valencia, which subsidized the research project CONSIM-Desarrollo de un Modelo para la Evaluacion de la Consistencia del Diseno Geometric de Carreteras Convencionales Mediante Simuladores de Conduccion. The study presented here was also part of the research project titled CASEFU-Estudio Experimental de la Funcionalidad y Seguridad de las Carreteras Convencionales, which was subsidized by the Spanish Ministry of Economy and Competitiveness and the European Social Fund.

Details

Language :
English
Database :
OpenAIRE
Journal :
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia, instname
Accession number :
edsair.doi.dedup.....6915b912bc849aa96047658a2c3f4796
Full Text :
https://doi.org/10.3141/2602-13