Flames and burners for furnaces

Publisher Summary This chapter attempts to provide sufficient knowledge to specify burners, critically assess a burner design and optimize furnace performance and heat transfer. The performance of the burners has a huge effect on furnace operation and efficiency, yet it is relatively rarely that burner design is fully integrated with the furnace heat transfer requirements; little wonder then that poor performance is often the result. A burner is a transducer since it transforms one form of energy into another form of energy. In the case of the burner, it transforms the chemical energy in the fuel into heat energy within the furnace using the chemical reactions in a flame. The effectiveness with which this is achieved is a measure of its performance. Gas burners are generally classified as premixed or turbulent jet diffusion burners, such as premixed burners, where the fuel and most of the air are mixed together prior to passing through the nozzle and turbulent jet diffusion burners, where the fuel and most of the air are introduced separately and are mixed within the furnace. Burners and furnaces are also classified by the air delivery system as natural draught, forced draught, induced draught and balanced draught. Oil burners have the added complexity of two-phase flow resulting from the spray of fuel. Pulverized coal firing has many advantages over other forms of coal firing and makes burning coal similar to oil firing from a process viewpoint. Pulverized coal burners are similar to oil burners but the atomizer is replaced with a coal nozzle. The fine coal is air conveyed to the nozzle. Burners are often specified and selected from a catalogue based on little more than the estimated heat liberation required for the furnace, the number of burners needed and the price of the burner.