Back to Search
Start Over
Introduction of milled kaolinite obtained by mechanosynthesis to cement mixture for the production of mortar: Study of mechanical performance of modified mortar
- Source :
- Powder Technology, Powder Technology, Elsevier, 2019, 355, pp.340-348. ⟨10.1016/j.powtec.2019.07.062⟩
- Publication Year :
- 2019
- Publisher :
- HAL CCSD, 2019.
-
Abstract
- The effect of the substitution by 5%, 15%, 30% and 45% of cement in mortars by milled kaolinite has been studied. Milled Kaolinite clay is obtained by using planetary ball mill. The influence on the mechanical performance and on the pozzolanic reactions are discussed. For both CEM I and CEM II formulations, after only 7 days of curing, the compression strength of mortars with 5% of milled kaolinite is comparable to the one of reference mortars for milling times of 3 h and above. For CEM I mortar, the results of the compressive strength show that 15% of kaolinite milled for 9 h allows the best compressive gain for 28 curing days and 90 curing days with 18.5% and 25.6%, respectively. For CEM II mortar, 15% of kaolinite milled for 9 h exhibits the best values of compressive gain for 28 curing days and 90 curing days with 9.8% and 9.7% respectively.
- Subjects :
- Cement
Materials science
General Chemical Engineering
Mechanical performance
02 engineering and technology
Pozzolan
021001 nanoscience & nanotechnology
Pozzolanic reaction
Mortar
Ball milling
Compressive strength
020401 chemical engineering
Kaolinite
[SDE]Environmental Sciences
Mechanosynthesis
0204 chemical engineering
Composite material
0210 nano-technology
Ball mill
Curing (chemistry)
Subjects
Details
- Language :
- English
- ISSN :
- 00325910
- Database :
- OpenAIRE
- Journal :
- Powder Technology, Powder Technology, Elsevier, 2019, 355, pp.340-348. ⟨10.1016/j.powtec.2019.07.062⟩
- Accession number :
- edsair.doi.dedup.....2cbdaafef1541459b09e58bb342cf6d0