Back to Search
Start Over
Radiological characterisation of alkali-activated construction materials containing red mud, fly ash and ground granulated blast-furnace slag
- Source :
- Sas, Z, Sha, W, Soutsos, M, Doherty, R, Bondar, D, Gijbels, K & Schroeyers, W 2019, ' Radiological characterisation of alkali-activated construction materials containing red mud, fly ash and ground granulated blast-furnace slag ', Science of the Total Environment, vol. 659, pp. 1496-1504 . https://doi.org/10.1016/j.scitotenv.2019.01.006
- Publication Year :
- 2018
-
Abstract
- Poor storage of industrial wastes has been a cause of land contamination issues. These wastes or by-products have the potential to be used as secondary raw materials in construction, promoting the concept of a circular economy that will avoid land contamination. Here we evaluate radiological environmental impacts when wastes that contain elevated levels of naturally occurring radionuclides (NORs) such as red mud, fly ash and ground granulated blast furnace slag are made into ‘green cements’ such as geopolymers or alkali-activated materials (AAMs). During the study, three AAM concrete and mortar series with various mixing ratios were prepared and investigated. The NOR content, I-Index, radon emanation and exhalation of the precursor waste materials and their cement products were measured and calculated and the strength of the cement products was compared. The emanation and the exhalation properties were calculated for the final products, weighing the data of the components as a function of their mixing ratio. The I-index alone suggested that the AAMs would be suitable products. AAMs containing ground granulated blast furnace slag exhibited the lowest radon exhalation and higher compressive strength, while the fly ash and red mud AAMs had increased final radon exhalation. In the case of fly ash, alkaline activation of fly ash dramatically increased the radon exhalation; the highest measured fly ash exhalation was 1.49 times of the theoretically calculated exhalation value. This highlights the increased risk of using fly ash as a component in AAMs and the need to carry out testing on the final products as well as individual secondary raw materials. The project leading to this paper has received funding from the The project leading to this paper has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no 701932. R. Doherty's time was also supported by the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 643087. Sklodowska-Curie grant agreement no. 643087.
- Subjects :
- Environmental Engineering
Radon emanation
010504 meteorology & atmospheric sciences
010501 environmental sciences
Raw material
Geopolymer
7. Clean energy
01 natural sciences
12. Responsible consumption
SDG 3 - Good Health and Well-being
Alkali-activated material
Environmental Chemistry
Gamma spectrometry
Radon exhalation
Secondary raw materials
Waste Management and Disposal
0105 earth and related environmental sciences
Cement
Waste management
SDG 8 - Decent Work and Economic Growth
Pollution
SDG 11 - Sustainable Cities and Communities
Red mud
Compressive strength
13. Climate action
Ground granulated blast-furnace slag
Fly ash
Environmental science
Mortar
SDG 12 - Responsible Consumption and Production
Subjects
Details
- ISSN :
- 18791026
- Volume :
- 659
- Database :
- OpenAIRE
- Journal :
- The Science of the total environment
- Accession number :
- edsair.doi.dedup.....283861fe6dd33a66ddd8b639352a072f
- Full Text :
- https://doi.org/10.1016/j.scitotenv.2019.01.006